successfully added to cart
View Cart

P-Clamping

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (13)
  • Multiple Direction Cutting Multiple Direction Cutting (13)
  • Profiling Profiling (11)
  • TRN Boring TRN Boring (11)
  • Turning Turning (13)
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (13)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (13)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (9)
    • H3
      Hardened Materials 56-60 HRC
      (9)
    • H4
      Hardened Materials >60 HRC
      (9)
Cutting Condition
  • Heavily Interrupted Cut (13)
  • Interrupted (11)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
Cutting Condition Material
  • H-All (9)
  • K-All (13)
  • K1 (7)
  • M-All (13)
  • N-All (11)
  • P-All (13)
  • S-All (13)
  • S2 (9)
  • S4 (5)
Tool Cutting Edge Angle
  • 93.0 (2)
  • 95.0 (11)
to
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (7)
  • 3.0 (4)
  • 4.0 (7)
  • 6.0 (6)
  • 8.0 (5)
to
cornerConfiguration
Corner Radius
  • 0.1 (13)
  • 0.102 (5)
  • 0.2 (13)
  • 0.203 (5)
  • 0.397 (11)
  • 0.4 (13)
  • 0.6 (4)
  • 0.792 (5)
  • 0.794 (13)
  • 0.8 (13)
  • 1.19 (5)
  • 1.191 (11)
  • 1.2 (13)
  • 1.587 (5)
  • 1.588 (9)
  • 1.6 (9)
to
Corner Radius
  • 0.004 (13)
  • 0.008 (13)
  • 0.0083 (5)
  • 0.0156 (13)
  • 0.016 (13)
  • 0.031 (11)
  • 0.0312 (13)
  • 0.0313 (13)
  • 0.0315 (5)
  • 0.0469 (13)
  • 0.047 (9)
  • 0.0472 (5)
  • 0.0625 (9)
  • 0.063 (9)
  • 0.1563 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (5)
  • 241 (5)
  • CL4 (5)
  • CM2 (5)
  • CM3 (5)
  • CM4 (5)
  • CPX (5)
  • CW2 (5)
  • CW2015 (5)
  • CW5025 (9)
  • GX (5)
  • HK1500 (11)
  • HT2 (7)
  • HTX (5)
  • K060 (5)
  • K090 (5)
  • K1 (5)
  • K10M (11)
  • K10P (11)
  • K10U (9)
  • K15U (9)
  • K20K (11)
  • K21 (5)
  • K25M (13)
  • K25P (9)
  • K313 (13)
  • K35P (4)
  • K420 (5)
  • K45 (5)
  • K68 (5)
  • KB1340 (7)
  • KB1345 (5)
  • KB1610 (9)
  • KB1625 (5)
  • KB1630 (5)
  • KB5610 (9)
  • KB5625 (5)
  • KB5630 (5)
  • KB9610 (9)
  • KB9640 (11)
  • KBH10 (9)
  • KBH10B (5)
  • KBH20 (9)
  • KBH20B (5)
  • KBK35 (5)
  • KC210 (5)
  • KC250 (5)
  • KC5010 (13)
  • KC5025 (13)
  • KC5410 (9)
  • KC5510 (13)
  • KC5525 (13)
  • KC710 (5)
  • KC720 (9)
  • KC722 (5)
  • KC730 (13)
  • KC7310 (13)
  • KC732 (9)
  • KC8050 (13)
  • KC810 (11)
  • KC850 (11)
  • KC9010 (13)
  • KC9025 (13)
  • KC910 (9)
  • KC9105 (13)
  • KC9110 (13)
  • KC9120 (11)
  • KC9125 (13)
  • KC9140 (13)
  • KC9145 (9)
  • KC9215 (13)
  • KC9225 (13)
  • KC9240 (13)
  • KC9240NEW (13)
  • KC9245 (13)
  • KC9315 (13)
  • KC9320 (13)
  • KC9325 (13)
  • KC935 (13)
  • KC950 (9)
  • KC990 (13)
  • KCK05 (13)
  • KCK05B (11)
  • KCK15 (13)
  • KCK15B (13)
  • KCK20 (13)
  • KCK20B (13)
  • KCM15 (13)
  • KCM15B (13)
  • KCM25 (13)
  • KCM25B (13)
  • KCM35 (11)
  • KCM35B (11)
  • KCP05 (13)
  • KCP05B (13)
  • KCP10 (13)
  • KCP10B (13)
  • KCP25 (13)
  • KCP25B (13)
  • KCP30 (13)
  • KCP30B (11)
  • KCP40 (9)
  • KCP40B (11)
  • KCPK05 (11)
  • KCS10 (5)
  • KCS10B (11)
  • KCU10 (13)
  • KCU25 (13)
  • KD050 (5)
  • KD081 (5)
  • KD100 (5)
  • KD120 (5)
  • KD1400 (9)
  • KD1405 (5)
  • KD1425 (9)
  • KM1 (5)
  • KMF (5)
  • KT1120 (5)
  • KT125 (5)
  • KT150 (5)
  • KT175 (5)
  • KT315 (13)
  • KT325 (7)
  • KU10T (13)
  • KU30T (13)
  • KY1310 (9)
  • KY1320 (9)
  • KY1540 (5)
  • KY1615 (5)
  • KY2000 (5)
  • KY2100 (5)
  • KY3000 (5)
  • KY3400 (9)
  • KY3500 (9)
  • KY4000 (5)
  • KY4300 (5)
  • KY4400 (9)
  • KYHK15B (9)
  • KYK10 (9)
  • KYK25 (9)
  • KYK35 (9)
  • KYS25 (5)
  • KYS30 (9)
  • NL200 (5)
  • NL250 (11)
  • NL300 (5)
  • NL400 (9)
  • NL920 (11)
  • P25 (5)
  • PB100 (5)
  • PB170 (5)
  • PB250 (5)
  • PB300 (5)
  • PS5 (7)
  • SP0819 (9)
  • SP3019 (9)
  • SP4019 (11)
  • THM (5)
  • THM-X (5)
  • THMF-X (5)
  • TN10P (13)
  • TN10U (9)
  • TN15M (11)
  • TN15U (9)
  • TN2000 (11)
  • TN20K (11)
  • TN20P (13)
  • TN30M (13)
  • TN30P (9)
  • TN4000 (11)
  • TN5015 (11)
  • TN5020 (11)
  • TN5105 (11)
  • TN5120 (11)
  • TN6010 (5)
  • TN6025 (9)
  • TN7005 (11)
  • TN7010 (11)
  • TN7015 (11)
  • TN7025 (11)
  • TN7035 (9)
  • TN7105 (13)
  • TN7110 (11)
  • TN7115 (11)
  • TN7125 (11)
  • TN7135 (9)
  • TN8025 (13)
  • TTI15 (7)
  • TTR (5)
  • TTS (5)
  • TTX (5)
  • WBH10C (9)
  • WBH10P (5)
  • WBH10U (9)
  • WBH20P (9)
  • WBH25P (5)
  • WBH25U (5)
  • WBH30P (5)
  • WBK40U (7)
  • WBK45U (5)
  • WDN00U (5)
  • WDN25U (9)
  • WK05CT (13)
  • WK15CT (11)
  • WK20CT (13)
  • WM15CT (13)
  • WM25CT (13)
  • WM35CT (13)
  • WP05CT (9)
  • WP15CT (13)
  • WP20TT (2)
  • WP25CT (13)
  • WP35CT (13)
  • WS10PT (13)
  • WS25PT (13)
  • WU10HT (13)
  • WU10PT (13)
  • WU25PT (13)
  • X00511 (5)
Hand Of Tool
  • L (6)
  • R (7)
Minimum Axial Groove Diameter
  • 1.2598 (11)
  • 1.5748 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (11)
  • 40.0 (2)
to
Cutting Direction
  • B (11)
  • E (2)
Maximum Bore Depth
  • 55.09 (2)
  • 75.04 (1)
  • 76.02 (2)
  • 77.33 (8)
to
Maximum Bore Depth
  • 2.1689 (2)
  • 2.9543 (1)
  • 2.9929 (2)
  • 3.0445 (8)
to
Wiper Insert
  • N (13)
  • Y (13)
frontEnd
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (5)
  • D-DIAMOND/RHOMBIC 55 (2)
  • W-TRIGON 80 (6)
insertGeometry
Cutting Tool Material
  • B H (11)
  • B L (9)
  • C A (9)
  • C N (11)
  • D P (9)
  • H T (13)
  • H W (13)
other
Over All Length [L]
  • 70.0 (2)
  • 90.0 (10)
  • 100.0 (1)
to
Over All Length [L]
  • 2.7559 (2)
  • 3.5433 (10)
  • 3.937 (1)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM40TS™ Internal Cutting Units

P-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3959342 KM40TSS25GPDUNL11 KM40TSS25GPDUNL11 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 DN..110408/DN..332 0.41 0.90
    List price:
    $382.00 /each.
    Your price::
    Qty
    3959343 KM40TSS25GPDUNR11 KM40TSS25GPDUNR11 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 DN..110408/DN..332 0.41 0.90
      List price:
      $382.00 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      KM40TS™ Internal Cutting Units

      P-Clamping
      (6 Products)
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
      3959344 KM40TSS25EPWLNL08 KM40TSS25EPWLNL08 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 WN..080408/WN..432 0.34 0.75
        List price:
        $382.00 /each.
        Your price::
        Qty
        3959345 KM40TSS25EPWLNR08 KM40TSS25EPWLNR08 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 WN..080408/WN..432 0.34 0.75
          List price:
          $382.00 /each.
          Your price::
          Qty
          3959346 KM40TSS25GPWLNL06 KM40TSS25GPWLNL06 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 WN..060408/WN..332 0.41 0.90
            List price:
            $382.00 /each.
            Your price::
            Qty
            3959347 KM40TSS25GPWLNR06 KM40TSS25GPWLNR06 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 WN..060408/WN..332 0.41 0.90
              List price:
              $382.00 /each.
              Your price::
              Qty
              3959348 KM40TSS25GPWLNL08 KM40TSS25GPWLNL08 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 WN..080408/WN..432 0.40 0.89
                List price:
                $382.00 /each.
                Your price::
                Qty
                3959349 KM40TSS25GPWLNR08 KM40TSS25GPWLNR08 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 WN..080408/WN..432 0.40 0.89
                  List price:
                  $382.00 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  KM40TS™ Internal Cutting Units

                  P-Clamping
                  (5 Products)
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                  3959336 KM40TSS25GPCLNL12 KM40TSS25GPCLNL12 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 CN..120408/CN..432 0.41 0.90
                    List price:
                    $382.00 /each.
                    Your price::
                    Qty
                    3959337 KM40TSS25GPCLNR12 KM40TSS25GPCLNR12 25.0000 .9843 32.0000 1.259 17.0000 .6693 77.3300 3.044 90.0000 3.543 CN..120408/CN..432 0.41 0.90
                      List price:
                      $382.00 /each.
                      Your price::
                      Qty
                      3959339 KM40TSS25HPCLNR12 KM40TSS25HPCLNR12 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 CN..120408/CN..432 0.49 1.09
                        List price:
                        $382.00 /each.
                        Your price::
                        Qty
                        3959340 KM40TSS32GPCLNL12 KM40TSS32GPCLNL12 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 CN..120408/CN..432 0.59 1.29
                          List price:
                          $382.00 /each.
                          Your price::
                          Qty
                          3959341 KM40TSS32GPCLNR12 KM40TSS32GPCLNR12 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 CN..120408/CN..432 0.59 1.29
                            List price:
                            $382.00 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty

                            Sold in pkg. of

                            product-image
                            Please adjust the following properties from

                            ISO Catalog Number

                            ANSI Catalog Number

                            to find similar products.
                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                            You are about to create a duplicate . Do you want to proceed?
                            You are about to delete Do you want to proceed?
                            What would you like to rename your to?
                            Please enter a valid name
                            Please enter a name for the duplicate
                            Please enter a valid name
                            You are about to add to your My Solutions page. Do you want to proceed?
                            Please enter a valid name
                            Send a copy of

                            Please enter a valid Email
                            Please enter a valid name

                            We have found the following CAD Drawings

                            Select the files you are looking for and download them all at once

                            You should be logged to see your dashboard information
                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                            item(s) successfully added to the cart
                            View Cart