successfully added to cart
View Cart

M-Clamping

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (42)
  • Multiple Direction Cutting Multiple Direction Cutting (42)
  • Profiling Profiling (42)
  • TRN Boring TRN Boring (42)
  • Turning Turning (42)
Workpiece Material
  • P Steel (42)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (42)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (42)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (42)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (42)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (42)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (42)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (42)
  • M Stainless Steel (42)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (42)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (42)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (42)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum
      (42)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (42)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (40)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (42)
    • N6
      Carbon, Graphite Composites, CFRP
      (42)
    • N7
      MMC's
      (42)
  • S High-Temp Alloys (42)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (42)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (42)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (42)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (42)
  • H Hardened Materials (42)
    • H1
      Hardened Materials 44-48 HRC
      (42)
    • H2
      Hardened Materials 48-55 HRC
      (42)
    • H3
      Hardened Materials 56-60 HRC
      (42)
    • H4
      Hardened Materials >60 HRC
      (42)
Cutting Condition
  • Heavily Interrupted Cut (42)
  • Interrupted (42)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (42)
  • Varying Depth of Cut (42)
Cutting Condition Material
  • H-All (42)
  • K-All (42)
  • K1 (20)
  • M-All (42)
  • N-All (42)
  • P-All (42)
  • S-All (42)
  • S2 (42)
  • S4 (35)
Tool Cutting Edge Angle
  • 93.0 (15)
  • 95.0 (27)
to
Cutting Edges Per Insert
  • 1.0 (40)
  • 2.0 (37)
  • 3.0 (5)
  • 4.0 (37)
  • 6.0 (5)
  • 8.0 (22)
to
cornerConfiguration
Corner Radius
  • 0.1 (40)
  • 0.102 (35)
  • 0.2 (40)
  • 0.203 (35)
  • 0.397 (40)
  • 0.4 (42)
  • 0.406 (15)
  • 0.6 (5)
  • 0.792 (20)
  • 0.794 (40)
  • 0.8 (42)
  • 1.188 (2)
  • 1.19 (20)
  • 1.191 (42)
  • 1.2 (42)
  • 1.587 (20)
  • 1.588 (42)
  • 1.6 (42)
  • 2.38 (2)
  • 2.381 (15)
  • 2.4 (2)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (40)
  • 0.008 (40)
  • 0.0083 (20)
  • 0.0156 (42)
  • 0.016 (40)
  • 0.031 (40)
  • 0.0312 (40)
  • 0.0313 (42)
  • 0.0315 (20)
  • 0.0468 (2)
  • 0.0469 (42)
  • 0.047 (42)
  • 0.0472 (20)
  • 0.0625 (42)
  • 0.063 (27)
  • 0.0938 (17)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (20)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (37)
  • 241 (20)
  • CL4 (20)
  • CM2 (37)
  • CM3 (20)
  • CM4 (22)
  • CPX (37)
  • CW2 (20)
  • CW2015 (37)
  • CW5025 (42)
  • GX (20)
  • HK1500 (25)
  • HT2 (20)
  • HTX (20)
  • K060 (35)
  • K090 (37)
  • K1 (20)
  • K10M (42)
  • K10P (42)
  • K10U (40)
  • K15U (40)
  • K20K (42)
  • K21 (20)
  • K25M (42)
  • K25P (40)
  • K313 (42)
  • K35P (22)
  • K420 (37)
  • K45 (35)
  • K68 (37)
  • KB1340 (20)
  • KB1345 (35)
  • KB1610 (40)
  • KB1625 (35)
  • KB1630 (35)
  • KB5610 (40)
  • KB5625 (35)
  • KB5630 (35)
  • KB9610 (40)
  • KB9640 (25)
  • KBH10 (40)
  • KBH10B (35)
  • KBH20 (40)
  • KBH20B (35)
  • KBK35 (20)
  • KC210 (35)
  • KC250 (37)
  • KC5010 (42)
  • KC5025 (42)
  • KC5410 (42)
  • KC5510 (42)
  • KC5525 (40)
  • KC710 (20)
  • KC720 (42)
  • KC722 (20)
  • KC730 (42)
  • KC7310 (42)
  • KC732 (42)
  • KC8050 (42)
  • KC810 (42)
  • KC850 (42)
  • KC9010 (42)
  • KC9025 (42)
  • KC910 (42)
  • KC9105 (42)
  • KC9110 (42)
  • KC9120 (42)
  • KC9125 (42)
  • KC9140 (42)
  • KC9145 (42)
  • KC9215 (42)
  • KC9225 (42)
  • KC9240 (42)
  • KC9240NEW (42)
  • KC9245 (42)
  • KC9315 (42)
  • KC9320 (42)
  • KC9325 (42)
  • KC935 (42)
  • KC950 (42)
  • KC990 (42)
  • KCD25 (15)
  • KCK05 (42)
  • KCK05B (42)
  • KCK15 (42)
  • KCK15B (42)
  • KCK20 (42)
  • KCK20B (42)
  • KCM15 (42)
  • KCM15B (42)
  • KCM25 (42)
  • KCM25B (42)
  • KCM35 (42)
  • KCM35B (27)
  • KCP05 (42)
  • KCP05B (40)
  • KCP10 (42)
  • KCP10B (42)
  • KCP25 (42)
  • KCP25B (42)
  • KCP30 (42)
  • KCP30B (42)
  • KCP40 (42)
  • KCP40B (42)
  • KCPK05 (42)
  • KCS10 (20)
  • KCS10B (42)
  • KCU10 (42)
  • KCU25 (42)
  • KD050 (35)
  • KD081 (35)
  • KD100 (35)
  • KD120 (35)
  • KD1400 (40)
  • KD1405 (35)
  • KD1425 (40)
  • KM1 (20)
  • KMF (20)
  • KT1120 (20)
  • KT125 (35)
  • KT150 (35)
  • KT175 (35)
  • KT315 (40)
  • KT325 (20)
  • KTP10 (15)
  • KU10T (40)
  • KU30T (42)
  • KY1310 (42)
  • KY1320 (42)
  • KY1540 (35)
  • KY1615 (37)
  • KY2000 (37)
  • KY2100 (35)
  • KY3000 (37)
  • KY3400 (42)
  • KY3500 (42)
  • KY4000 (22)
  • KY4300 (37)
  • KY4400 (42)
  • KYHK15B (42)
  • KYK10 (40)
  • KYK25 (42)
  • KYK35 (42)
  • KYS25 (35)
  • KYS30 (40)
  • NL200 (20)
  • NL250 (42)
  • NL300 (22)
  • NL400 (27)
  • NL920 (40)
  • P25 (20)
  • PB100 (20)
  • PB170 (20)
  • PB250 (20)
  • PB300 (20)
  • PS5 (20)
  • SP0819 (27)
  • SP3019 (27)
  • SP4019 (42)
  • THM (20)
  • THM-X (20)
  • THMF-X (20)
  • TN10P (42)
  • TN10U (40)
  • TN15M (42)
  • TN15U (40)
  • TN2000 (25)
  • TN20K (42)
  • TN20P (42)
  • TN30M (42)
  • TN30P (42)
  • TN4000 (25)
  • TN5015 (27)
  • TN5020 (27)
  • TN5105 (40)
  • TN5120 (42)
  • TN6010 (35)
  • TN6025 (25)
  • TN7005 (40)
  • TN7010 (42)
  • TN7015 (42)
  • TN7025 (42)
  • TN7035 (27)
  • TN7105 (25)
  • TN7110 (27)
  • TN7115 (42)
  • TN7125 (27)
  • TN7135 (27)
  • TN8025 (42)
  • TTI15 (20)
  • TTR (20)
  • TTS (20)
  • TTX (20)
  • WBH10C (40)
  • WBH10P (35)
  • WBH10U (40)
  • WBH20P (40)
  • WBH25P (35)
  • WBH25U (35)
  • WBH30P (35)
  • WBK40U (20)
  • WBK45U (35)
  • WDN00U (35)
  • WDN25U (40)
  • WK05CT (42)
  • WK15CT (25)
  • WK20CT (42)
  • WM15CT (42)
  • WM25CT (42)
  • WM35CT (42)
  • WP05CT (25)
  • WP15CT (42)
  • WP25CT (42)
  • WP35CT (42)
  • WS10PT (42)
  • WS25PT (42)
  • WU10HT (42)
  • WU10PT (25)
  • WU25PT (25)
  • X00511 (20)
Hand Of Tool
  • L (20)
  • R (22)
Minimum Axial Groove Diameter
  • 1.2598 (11)
  • 1.5748 (13)
  • 1.9685 (14)
  • 1.969 (2)
  • 2.4803 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (11)
  • 40.0 (13)
  • 50.0 (16)
  • 63.0 (2)
to
Cutting Direction
  • B (27)
  • E (6)
Maximum Bore Depth
  • 38.3 (3)
  • 49.22 (2)
  • 60.47 (4)
  • 70.47 (4)
  • 81.26 (4)
  • 87.23 (6)
  • 91.26 (2)
  • 91.28 (2)
  • 96.26 (5)
  • 120.34 (8)
  • 140.0 (2)
to
Maximum Bore Depth
  • 1.5079 (2)
  • 1.508 (1)
  • 1.9378 (2)
  • 2.3807 (2)
  • 2.381 (2)
  • 2.774 (2)
  • 2.7744 (2)
  • 3.1992 (2)
  • 3.2 (2)
  • 3.434 (4)
  • 3.4343 (2)
  • 3.593 (2)
  • 3.594 (2)
  • 3.7898 (2)
  • 3.79 (3)
  • 4.7378 (4)
  • 4.738 (4)
  • 5.5118 (2)
to
Wiper Insert
  • N (42)
  • Y (40)
frontEnd
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (22)
  • D-DIAMOND/RHOMBIC 55 (15)
  • W-TRIGON 80 (5)
insertGeometry
Cutting Tool Material
  • B H (40)
  • B L (40)
  • C A (42)
  • C N (42)
  • D P (40)
  • H T (40)
  • H W (42)
other
Over All Length [L]
  • 60.0 (3)
  • 70.0 (2)
  • 80.0 (4)
  • 90.0 (4)
  • 100.0 (4)
  • 110.0 (10)
  • 125.0 (5)
  • 140.0 (10)
to
Over All Length [L]
  • 2.3622 (3)
  • 2.7559 (2)
  • 3.1496 (4)
  • 3.5433 (4)
  • 3.937 (4)
  • 4.3307 (8)
  • 4.331 (2)
  • 4.9213 (5)
  • 5.5118 (10)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM50TS™ Internal Cutting Units

M-Clamping
(5 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3747119 KM50TSS40LMWLNL08 KM50TSS40LMWLNL08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
    List price:
    $422.26 /each.
    Your price::
    Qty
    3747120 KM50TSS40LMWLNR08 KM50TSS40LMWLNR08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
      List price:
      $422.26 /each.
      Your price::
      Qty
      3747121 KM50TSS25JMWLNR08 KM50TSS25JMWLNR08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.48
        List price:
        $422.26 /each.
        Your price::
        Qty
        3747122 KM50TSS25JMWLNL08 KM50TSS25JMWLNL08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.47
          List price:
          $422.26 /each.
          Your price::
          Qty
          3747123 KM50TSS32KMWLNR08 KM50TSS32KMWLNR08 40.0000 1.574 22.0000 .8661 96.2600 3.790 125.0000 4.921 WN..080408/WN..432 0.99 2.17
            List price:
            $422.26 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            KM50TS™ Internal Cutting Units

            M-Clamping
            (22 Products)
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
            3753687 KM50TSS25DMCLNL12 KM50TSS25DMCLNL12 32.0000 1.259 17.0000 .6693 38.3000 1.507 60.0000 2.362 CN..120408/CN..432 0.48 1.06
              List price:
              $422.26 /each.
              Your price::
              Qty
              3753688 KM50TSS25DMCLNR12 KM50TSS25DMCLNR12 32.0000 1.259 17.0000 .6693 38.3000 1.507 60.0000 2.362 CN..120408/CN..432 0.48 1.06
                List price:
                $422.26 /each.
                Your price::
                Qty
                3753689 KM50TSS25EMCLNL12 KM50TSS25EMCLNL12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
                  List price:
                  $422.26 /each.
                  Your price::
                  Qty
                  3753690 KM50TSS25EMCLNR12 KM50TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
                    List price:
                    $422.26 /each.
                    Your price::
                    Qty
                    3753691 KM50TSS25JMCLNL12 KM50TSS25JMCLNL12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
                      List price:
                      $422.26 /each.
                      Your price::
                      Qty
                      3753692 KM50TSS25JMCLNR12 KM50TSS25JMCLNR12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
                        List price:
                        $422.26 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        KM50TS™ Internal Cutting Units

                        M-Clamping
                        (15 Products)
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                        3753480 KM50TSS40HMDUNL15 KM50TSS40HMDUNL15 50.0000 1.968 27.0000 1.063 81.2600 3.200 100.0000 3.937 DN..150408/DN..432 1.03 2.28
                          List price:
                          $422.26 /each.
                          Your price::
                          Qty
                          3753485 KM50TSS40HMDUNR15 KM50TSS40HMDUNR15 50.0000 1.968 27.0000 1.063 81.2600 3.200 100.0000 3.937 DN..150408/DN..432 1.03 2.27
                            List price:
                            $422.26 /each.
                            Your price::
                            Qty
                            3753488 KM50TSS40JMDUNL15 KM50TSS40JMDUNL15 50.0000 1.968 27.0000 1.063 91.2600 3.593 110.0000 4.330 DN..150408/DN..432 1.13 2.49
                              List price:
                              $422.26 /each.
                              Your price::
                              Qty
                              3753490 KM50TSS40JMDUNR15 KM50TSS40JMDUNR15 50.0000 1.968 27.0000 1.063 91.2600 3.593 110.0000 4.330 DN..150408/DN..432 1.13 2.49
                                List price:
                                $422.26 /each.
                                Your price::
                                Qty
                                3753492 KM50TSS40LMDUNL15 KM50TSS40LMDUNL15 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 DN..150408/DN..432 1.42 3.12
                                  List price:
                                  $422.26 /each.
                                  Your price::
                                  Qty
                                  3753493 KM50TSS40LMDUNR15 KM50TSS40LMDUNR15 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 DN..150408/DN..432 1.42 3.12
                                    List price:
                                    $422.26 /each.
                                    Your price::
                                    Qty
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty

                                    Sold in pkg. of

                                    product-image
                                    Please adjust the following properties from

                                    ISO Catalog Number

                                    ANSI Catalog Number

                                    to find similar products.
                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                    You are about to create a duplicate . Do you want to proceed?
                                    You are about to delete Do you want to proceed?
                                    What would you like to rename your to?
                                    Please enter a valid name
                                    Please enter a name for the duplicate
                                    Please enter a valid name
                                    You are about to add to your My Solutions page. Do you want to proceed?
                                    Please enter a valid name
                                    Send a copy of

                                    Please enter a valid Email
                                    Please enter a valid name

                                    We have found the following CAD Drawings

                                    Select the files you are looking for and download them all at once

                                    You should be logged to see your dashboard information
                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                    item(s) successfully added to the cart
                                    View Cart