Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

KM63XMZ™ Cutting Units

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (21)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (21)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (21)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (21)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (21)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (21)
  • M Stainless Steel (21)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (21)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (21)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (21)
  • K Cast Iron (21)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (21)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (21)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (21)
  • N Non-Ferrous Materials (21)
    • N1
      Wrought Aluminum
      (21)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (21)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (21)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (21)
    • N6
      Carbon, Graphite Composites, CFRP
      (21)
    • N7
      MMC's
      (21)
  • S High-Temp Alloys (21)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (21)
  • H Hardened Materials (21)
    • H1
      Hardened Materials 44-48 HRC
      (21)
    • H2
      Hardened Materials 48-55 HRC
      (21)
    • H3
      Hardened Materials 56-60 HRC
      (21)
    • H4
      Hardened Materials >60 HRC
      (21)
Applications
Applications
  • Facing Facing (16)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Profiling Profiling (21)
  • TRN Boring TRN Boring (16)
  • Turning Turning (21)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (21)
  • Interrupted (16)
  • Lightly Interrupted Cut (21)
  • Smooth Cut (21)
  • Varying Depth of Cut (21)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 48.0 (6)
  • 49.783 (1)
  • 50.0 (2)
  • 93.0 (6)
  • 95.0 (6)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (2)
  • 4.0 (18)
  • 6.0 (2)
  • 8.0 (11)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (1)
  • 0.004 in (19)
  • 0.008 in (16)
  • 0.014 in (3)
  • 0.016 in (21)
  • 0.024 in (2)
  • 0.031 in (21)
  • 0.047 in (21)
  • 0.062 in (5)
  • 0.063 in (16)
  • 0.094 in (6)
  • 0.095 in (2)
  • 0.126 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (1)
  • 0.1 mm (19)
  • 0.2 mm (16)
  • 0.351 mm (3)
  • 0.4 mm (21)
  • 0.601 mm (2)
  • 0.8 mm (21)
  • 1.201 mm (21)
  • 1.576 mm (5)
  • 1.6 mm (16)
  • 2.375 mm (6)
  • 2.401 mm (2)
  • 3.2 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (18)
  • 241 (5)
  • CL4 (8)
  • CM2 (18)
  • CM3 (8)
  • CM4 (7)
  • CPX (14)
  • CW2 (8)
  • CW2015 (18)
  • CW5025 (20)
  • GX (5)
  • HK1500 (11)
  • HT2 (9)
  • HTX (6)
  • K060 (9)
  • K090 (18)
  • K1 (5)
  • K10M (21)
  • K10P (20)
  • K10U (19)
  • K15U (19)
  • K20K (20)
  • K21 (5)
  • K25M (21)
  • K25P (19)
  • K313 (21)
  • K35P (11)
  • K420 (15)
  • K45 (13)
  • K68 (19)
  • KB1340 (5)
  • KB1345 (9)
  • KB1610 (16)
  • KB1625 (14)
  • KB1630 (13)
  • KB5610 (16)
  • KB5625 (14)
  • KB5630 (14)
  • KB9610 (19)
  • KB9640 (7)
  • KBH10 (19)
  • KBH10B (16)
  • KBH20 (19)
  • KBH20B (16)
  • KBK35 (5)
  • KC210 (12)
  • KC250 (11)
  • KC5010 (21)
  • KC5020P (1)
  • KC5025 (21)
  • KC5410 (21)
  • KC5510 (20)
  • KC5525 (14)
  • KC710 (5)
  • KC720 (18)
  • KC722 (5)
  • KC730 (18)
  • KC7310 (20)
  • KC732 (18)
  • KC8050 (21)
  • KC810 (21)
  • KC850 (21)
  • KC9010 (20)
  • KC9025 (21)
  • KC910 (21)
  • KC9105 (21)
  • KC9110 (21)
  • KC9120 (20)
  • KC9125 (21)
  • KC9140 (20)
  • KC9145 (20)
  • KC9210 (3)
  • KC9215 (20)
  • KC9225 (21)
  • KC9240 (21)
  • KC9240NEW (21)
  • KC9245 (20)
  • KC9315 (21)
  • KC9320 (21)
  • KC9325 (20)
  • KC935 (21)
  • KC950 (21)
  • KC990 (20)
  • KCD25 (5)
  • KCK05 (21)
  • KCK05B (21)
  • KCK15 (21)
  • KCK15B (21)
  • KCK20 (21)
  • KCK20B (21)
  • KCM15 (21)
  • KCM15B (21)
  • KCM25 (21)
  • KCM25B (21)
  • KCM35 (21)
  • KCM35B (12)
  • KCP05 (21)
  • KCP05B (19)
  • KCP10 (21)
  • KCP10B (21)
  • KCP15 (1)
  • KCP25 (21)
  • KCP25B (21)
  • KCP25C (21)
  • KCP30 (21)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (21)
  • KCPK05 (20)
  • KCS10 (6)
  • KCS10B (21)
  • KCU10 (21)
  • KCU10B (21)
  • KCU25 (21)
  • KD050 (14)
  • KD081 (14)
  • KD100 (14)
  • KD120 (13)
  • KD1400 (16)
  • KD1405 (14)
  • KD1425 (16)
  • KM1 (5)
  • KMF (5)
  • KS15 (5)
  • KT1120 (8)
  • KT125 (16)
  • KT150 (13)
  • KT175 (17)
  • KT315 (19)
  • KT325 (9)
  • KT5020 (4)
  • KTP10 (5)
  • KU10 (1)
  • KU10T (19)
  • KU30T (21)
  • KY1310 (13)
  • KY1320 (20)
  • KY1540 (9)
  • KY1615 (18)
  • KY2000 (11)
  • KY2100 (9)
  • KY3000 (18)
  • KY3400 (13)
  • KY3500 (20)
  • KY4000 (11)
  • KY4300 (11)
  • KY4400 (20)
  • KYHK15B (20)
  • KYK10 (11)
  • KYK25 (13)
  • KYK35 (20)
  • KYS25 (9)
  • KYS30 (11)
  • NL200 (8)
  • NL250 (20)
  • NL300 (10)
  • NL400 (9)
  • NL920 (14)
  • P25 (5)
  • PB100 (5)
  • PB170 (5)
  • PB250 (5)
  • PB300 (5)
  • PS5 (8)
  • SP0819 (12)
  • SP3019 (9)
  • SP4019 (13)
  • SP4036 (4)
  • SP4093 (4)
  • THM (6)
  • THM-X (8)
  • THMF-X (5)
  • TN10P (21)
  • TN10U (19)
  • TN15M (21)
  • TN15U (19)
  • TN2000 (11)
  • TN20K (21)
  • TN20P (21)
  • TN30M (21)
  • TN30P (16)
  • TN4000 (11)
  • TN5015 (14)
  • TN5020 (13)
  • TN5105 (14)
  • TN5120 (17)
  • TN6010 (16)
  • TN6025 (10)
  • TN7005 (15)
  • TN7010 (17)
  • TN7015 (17)
  • TN7025 (17)
  • TN7035 (13)
  • TN7105 (11)
  • TN7110 (17)
  • TN7115 (17)
  • TN7125 (13)
  • TN7135 (13)
  • TN8025 (16)
  • TTI15 (9)
  • TTR (5)
  • TTS (8)
  • TTX (9)
  • WBH10C (19)
  • WBH10P (14)
  • WBH10U (16)
  • WBH20P (18)
  • WBH25P (14)
  • WBH25U (13)
  • WBH30P (14)
  • WBK40U (5)
  • WBK45U (12)
  • WDN00U (9)
  • WDN25U (16)
  • WK05CT (20)
  • WK15CT (11)
  • WK20CT (21)
  • WM15CT (21)
  • WM25CT (21)
  • WM35CT (20)
  • WP05CT (7)
  • WP15CT (21)
  • WP25CT (21)
  • WP35CT (21)
  • WS10PT (20)
  • WS25PT (20)
  • WU10HT (21)
  • WU10PT (15)
  • WU25PT (15)
  • X00511 (5)
  • X00580 (5)
  • X00581 (5)
  • X00582 (5)
  • X00583 (5)
  • X00584 (5)
  • X00585 (5)
  • X00586 (5)
  • X00591 (5)
  • X00592 (5)
  • X00593 (5)
  • X00594 (5)
  • X00596 (5)
  • X00597 (5)
  • X00599 (5)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (3)
Wiper Insert
Wiper Insert
  • N (21)
  • Y (7)
F Dimension
F Dimension
  • 43.0 mm (5)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 1.693 in (5)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 86.0 mm (7)
  • 100.0 mm (9)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.386 in (7)
  • 3.938 in (9)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (5)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (5)
Maximum Bore Depth
Maximum Bore Depth
  • 2.362 in (7)
  • 4.529 in (9)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 60.0 mm (7)
  • 115.0 mm (9)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (2)
  • CUTOFF SUPPORT BLADE (4)
Clamp Style
Clamp Style
  • M (17)
  • P (3)
  • S (1)
Front End Type
Front End Type
  • KMC - Cartridge Mount Kenna (2)
  • PMK - Prismatic Adapter Kenna (4)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (7)
  • V-DIAMOND/RHOMBIC 35 (5)
  • W-TRIGON 80 (2)
Front End Style
Front End Style
  • KMC-29WID/MAN SerratedBlade Mt (2)
  • PMK02 Cutoff Sup Bld A1-A3 (4)
Gage Length
Gage Length
  • 2.118 in (2)
  • 4.118 in (2)
  • 4.874 in (2)
Gage Length
Gage Length
  • 53.801 mm (2)
  • 104.601 mm (2)
  • 123.801 mm (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (19)
  • B L (19)
  • C A (20)
  • C N (20)
  • D P (19)
  • H T (19)
  • H W (21)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (5)
System Size
System Size
  • KM63TS (2)
  • KM63XMZ (9)
No filters matching ""
Zúžení podle kategorie:
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

MCLN 95° MCLN 95°

M-Clamping
(4 Products)
  • Shank - KM-XMZShank - KM-XMZ
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3103485 KM63XMZMCLNLF12Y KM63XMZMCLNLF12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
    Ceníková cena:
    $362.26 /každý
    Vaše cena::
    3103486 KM63XMZMCLNLF16Y KM63XMZMCLNLF16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
      Ceníková cena:
      $362.26 /každý
      Vaše cena::
      1551813 KM63XMZMCLNR12Y KM63XMZMCLNR12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
        Ceníková cena:
        $362.26 /každý
        Vaše cena::
        1603738 KM63XMZMCLNR16Y KM63XMZMCLNR16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
          Ceníková cena:
          $362.26 /každý
          Vaše cena::
          Ceníková cena:
          Sleva: %
          Vaše cena::
          Výměna Tato položka není k dispozici
          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

          PŮVODNÍ PRODUKT

          MDJN 93° MDJN 93°

          M-Clamping
          (2 Products)
          • Shank - KM-XMZShank - KM-XMZ
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          Informace o produktech
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          3103488 KM63XMZMDJNLF1504Y KM63XMZMDJNLF1504Y 60.0000 2.362 43.0000 1.692 DN..150408/DN..432 1.07 2.36
            Ceníková cena:
            $362.26 /každý
            Vaše cena::
            3103487 KM63XMZMDJNR1504Y KM63XMZMDJNR1504Y 60.0000 2.362 43.0000 1.692 DN..150408/DN..432 1.07 2.36
              Ceníková cena:
              $362.26 /každý
              Vaše cena::
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

              PŮVODNÍ PRODUKT

              MWMN 50° • 95° Application • Centerline MWMN 50° • 95° Application • Centerline

              (2 Products)
              • Shank - KM-XMZShank - KM-XMZ
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3487571 KM63XMZMWMNLF08115Y KM63XMZMWMNLF08115Y 115.0000 4.528 0.0000 .0000 WN..080408/WN..432 2.02 4.46
                Ceníková cena:
                $369.68 /každý
                Vaše cena::
                3487572 KM63XMZMWMNR08115Y KM63XMZMWMNR08115Y 115.0000 4.528 0.0000 .0000 WN..080408/WN..432 2.03 4.47
                  Ceníková cena:
                  $369.68 /každý
                  Vaše cena::
                  Ceníková cena:
                  Sleva: %
                  Vaše cena::
                  Výměna Tato položka není k dispozici
                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                  PŮVODNÍ PRODUKT

                  MCMN 50° • 95° application • Centerline MCMN 50° • 95° application • Centerline

                  M-Clamping Centerline
                  (1 Products)
                  • Shank - KM-XMZShank - KM-XMZ
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  Informace o produktech
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  3180556 KM63XMZMCMNNF12115Y KM63XMZMCMNNF12115Y 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.07 4.57
                    Ceníková cena:
                    $384.47 /každý
                    Vaše cena::
                    Ceníková cena:
                    Sleva: %
                    Vaše cena::
                    Výměna Tato položka není k dispozici
                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                    PŮVODNÍ PRODUKT

                    MDMN 48° • 93° Application • Centerline MDMN 48° • 93° Application • Centerline

                    M-Clamping Centerline
                    (4 Products)
                    • Shank - KM-XMZShank - KM-XMZ
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    Informace o produktech
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    3487458 KM63XMZMDMNLF1504115Y KM63XMZMDMNLF1504115Y 115.0000 4.528 0.0000 .0000 DN..150408/DN..432 1.87 4.11
                      Ceníková cena:
                      $384.47 /každý
                      Vaše cena::
                      3487459 KM63XMZMDMNLF1506115Y KM63XMZMDMNLF1506115Y 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.86 4.10
                        Ceníková cena:
                        $384.47 /každý
                        Vaše cena::
                        3487461 KM63XMZMDMNR1504115Y KM63XMZMDMNR1504115Y 115.0000 4.528 0.0000 .0000 DN..150408/DN..432 1.88 4.14
                          Ceníková cena:
                          $384.47 /každý
                          Vaše cena::
                          3487462 KM63XMZMDMNR1506115Y KM63XMZMDMNR1506115Y 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.88 4.13
                            Ceníková cena:
                            $384.47 /každý
                            Vaše cena::
                            Ceníková cena:
                            Sleva: %
                            Vaše cena::
                            Výměna Tato položka není k dispozici
                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                            PŮVODNÍ PRODUKT

                            MVMN 48° • 93° Application • Centerline MVMN 48° • 93° Application • Centerline

                            M-Clamping Centerline
                            (2 Products)
                            • Shank - KM-XMZShank - KM-XMZ
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            Informace o produktech
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                            3487460 KM63XMZMVMNLF16115Y KM63XMZMVMNLF16115Y 115.0000 4.528 0.0000 .0000 VN..160408/VN..332 1.97 4.35
                              Ceníková cena:
                              $384.47 /každý
                              Vaše cena::
                              3487473 KM63XMZMVMNR16115Y KM63XMZMVMNR16115Y 115.0000 4.528 0.0000 .0000 VN..160408/VN..332 1.97 4.35
                                Ceníková cena:
                                $384.47 /každý
                                Vaše cena::
                                Ceníková cena:
                                Sleva: %
                                Vaše cena::
                                Výměna Tato položka není k dispozici
                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                PŮVODNÍ PRODUKT

                                SVJB 93° SVJB 93°

                                S-Clamping • Cut-Off Blocks for Cut-Off Blades
                                (1 Products)
                                • Shank - KM-XMZShank - KM-XMZ
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                Informace o produktech
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                2231270 KM63XMZSVJBLF16Y KM63XMZSVJBLF16Y 60.0000 2.362 43.0000 1.692 VB..160408/VB..332 1.07 2.35
                                  Ceníková cena:
                                  $424.10 /každý
                                  Vaše cena::
                                  Ceníková cena:
                                  Sleva: %
                                  Vaše cena::
                                  Výměna Tato položka není k dispozici
                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                  PŮVODNÍ PRODUKT

                                  PDJN 93° PDJN 93°

                                  P-Clamping
                                  (1 Products)
                                  • Shank - KM-XMZShank - KM-XMZ
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  Informace o produktech
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  2231265 KM63XMZPDJNR15Y KM63XMZPDJNR15Y 60.0000 2.362 43.0000 1.692 DN..150608/DN..442 1.04 2.29
                                    Ceníková cena:
                                    $424.10 /každý
                                    Vaše cena::
                                    Ceníková cena:
                                    Sleva: %
                                    Vaše cena::
                                    Výměna Tato položka není k dispozici
                                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                    PŮVODNÍ PRODUKT

                                    PCLN 95° PCLN 95°

                                    P-Clamping
                                    (2 Products)
                                    • Shank - KM-XMZShank - KM-XMZ
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    Informace o produktech
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                    2231264 KM63XMZPCLNLF12Y KM63XMZPCLNLF12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.23 2.71
                                      Ceníková cena:
                                      $386.42 /každý
                                      Vaše cena::
                                      2231263 KM63XMZPCLNR12Y KM63XMZPCLNR12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.23 2.71
                                        Ceníková cena:
                                        $386.42 /každý
                                        Vaše cena::
                                        Ceníková cena:
                                        Sleva: %
                                        Vaše cena::
                                        Výměna Tato položka není k dispozici
                                        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                        PŮVODNÍ PRODUKT

                                        MVJN 93° MVJN 93°

                                        M-Clamping
                                        (2 Products)
                                        • Shank - KM-XMZShank - KM-XMZ
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        Informace o produktech
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                        3103490 KM63XMZMVJNLF16Y KM63XMZMVJNLF16Y 60.0000 2.362 43.0000 1.692 VN..160408/VN..332 1.05 2.32
                                          Ceníková cena:
                                          $362.26 /každý
                                          Vaše cena::
                                          3103489 KM63XMZMVJNR16Y KM63XMZMVJNR16Y 60.0000 2.362 43.0000 1.692 VN..160408/VN..332 1.05 2.32
                                            Ceníková cena:
                                            $362.26 /každý
                                            Vaše cena::
                                            Ceníková cena:
                                            Sleva: %
                                            Vaše cena::
                                            Výměna Tato položka není k dispozici
                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                            PŮVODNÍ PRODUKT

                                            BS - Side Mount • KM63XMZ™ Cutting Units • A2™/A3™ Deep Grooving BS - Side Mount • KM63XMZ™ Cutting Units • A2™/A3™ Deep Grooving

                                            A2™ Cut-Off Blocks
                                            (4 Products)
                                            Informace o produktech
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [B1] Front Clearance [B1] Front Clearance [LPR] Protruding Length [LPR] Protruding Length [F] F Dimension [F] F Dimension [H2] Overall Height [H2] Overall Height [HW] Shank Height [HW] Shank Height Cartridge Size Cartridge Weight Kilograms Weight Pounds
                                            1982387 KM63XMZBSLF4Y KM63XMZBSLF4Y 37.6000 1.480 104.6000 4.118 21.9200