Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

D-Clamping

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (32)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (32)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (32)
    • H1
      Hardened Materials 44-48 HRC
      (32)
    • H2
      Hardened Materials 48-55 HRC
      (32)
    • H3
      Hardened Materials 56-60 HRC
      (32)
    • H4
      Hardened Materials >60 HRC
      (32)
Applications
Applications
  • Facing Facing (29)
  • ID Facing ID Facing (14)
  • Multiple Direction Cutting Multiple Direction Cutting (2)
  • Profiling Profiling (5)
  • TRN Boring TRN Boring (18)
  • Turning Turning (28)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (32)
  • Interrupted (32)
  • Lightly Interrupted Cut (32)
  • Smooth Cut (32)
  • Varying Depth of Cut (32)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (3)
  • 75.0 (6)
  • 90.0 (4)
  • 93.0 (9)
  • 95.0 (6)
  • 107.5 (4)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (14)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (17)
  • 2.0 (17)
  • 3.0 (8)
  • 4.0 (24)
  • 6.0 (8)
  • 8.0 (13)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (17)
  • 0.008 in (12)
  • 0.014 in (5)
  • 0.016 in (32)
  • 0.024 in (2)
  • 0.031 in (32)
  • 0.047 in (32)
  • 0.062 in (4)
  • 0.063 in (32)
  • 0.094 in (8)
  • 0.095 in (15)
  • 0.125 in (6)
  • 0.126 in (8)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (17)
  • 0.2 mm (12)
  • 0.351 mm (5)
  • 0.4 mm (32)
  • 0.601 mm (2)
  • 0.8 mm (32)
  • 1.201 mm (32)
  • 1.576 mm (4)
  • 1.6 mm (32)
  • 2.375 mm (8)
  • 2.401 mm (15)
  • 3.176 mm (6)
  • 3.2 mm (8)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (30)
  • 241 (4)
  • CL4 (16)
  • CM2 (30)
  • CM3 (22)
  • CM4 (13)
  • CPX (30)
  • CW2 (9)
  • CW2015 (30)
  • CW5025 (26)
  • GX (17)
  • HK1500 (24)
  • HT2 (9)
  • HTX (4)
  • K060 (17)
  • K090 (30)
  • K1 (10)
  • K10M (32)
  • K10P (32)
  • K10U (30)
  • K15U (30)
  • K20K (32)
  • K21 (17)
  • K25M (32)
  • K25P (30)
  • K313 (32)
  • K35P (28)
  • K420 (25)
  • K45 (23)
  • K68 (30)
  • KB1340 (11)
  • KB1345 (10)
  • KB1610 (19)
  • KB1625 (17)
  • KB1630 (10)
  • KB5610 (12)
  • KB5625 (17)
  • KB5630 (10)
  • KB9610 (24)
  • KB9640 (13)
  • KBH10 (24)
  • KBH10B (15)
  • KBH20 (24)
  • KBH20B (15)
  • KBK35 (4)
  • KC210 (28)
  • KC250 (25)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC5510 (32)
  • KC5525 (23)
  • KC710 (4)
  • KC720 (27)
  • KC722 (4)
  • KC730 (27)
  • KC7310 (32)
  • KC732 (27)
  • KC8050 (32)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (32)
  • KC910 (32)
  • KC9105 (32)
  • KC9110 (32)
  • KC9120 (32)
  • KC9125 (32)
  • KC9125RR (7)
  • KC9140 (32)
  • KC9145 (32)
  • KC9210 (5)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (32)
  • KC9320 (32)
  • KC9325 (32)
  • KC935 (32)
  • KC950 (32)
  • KC990 (32)
  • KCD25 (6)
  • KCK05 (32)
  • KCK05B (32)
  • KCK15 (32)
  • KCK15B (32)
  • KCK20 (32)
  • KCK20B (32)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (32)
  • KCM35B (20)
  • KCP05 (32)
  • KCP05B (24)
  • KCP10 (32)
  • KCP10B (32)
  • KCP25 (32)
  • KCP25B (32)
  • KCP25C (32)
  • KCP30 (32)
  • KCP30B (32)
  • KCP40 (32)
  • KCP40B (32)
  • KCPK05 (32)
  • KCS10 (4)
  • KCS10B (26)
  • KCU10 (32)
  • KCU10B (32)
  • KCU25 (32)
  • KD050 (23)
  • KD081 (23)
  • KD100 (10)
  • KD120 (23)
  • KD1400 (12)
  • KD1405 (10)
  • KD1425 (12)
  • KM1 (17)
  • KMF (4)
  • KS15 (4)
  • KT1120 (2)
  • KT125 (28)
  • KT150 (17)
  • KT175 (28)
  • KT315 (30)
  • KT325 (9)
  • KTP10 (6)
  • KU10T (30)
  • KU30T (32)
  • KY1310 (21)
  • KY1320 (32)
  • KY1540 (23)
  • KY1615 (30)
  • KY2000 (19)
  • KY2100 (17)
  • KY3000 (30)
  • KY3400 (27)
  • KY3500 (32)
  • KY4000 (13)
  • KY4300 (12)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (19)
  • KYK25 (27)
  • KYK35 (32)
  • KYS25 (17)
  • KYS30 (19)
  • NL200 (9)
  • NL250 (32)
  • NL300 (24)
  • NL400 (8)
  • NL920 (24)
  • P25 (17)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (9)
  • SP0819 (19)
  • SP0A00 (7)
  • SP3019 (21)
  • SP4019 (27)
  • SP61EJ (7)
  • THM (11)
  • THM-X (16)
  • THMF-X (11)
  • TN10P (32)
  • TN10U (30)
  • TN15M (32)
  • TN15U (30)
  • TN2000 (24)
  • TN20K (32)
  • TN20P (32)
  • TN30M (32)
  • TN30P (32)
  • TN4000 (24)
  • TN5015 (30)
  • TN5020 (26)
  • TN5105 (30)
  • TN5120 (32)
  • TN6010 (15)
  • TN6025 (18)
  • TN7005 (17)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (26)
  • TN7105 (11)
  • TN7110 (32)
  • TN7115 (32)
  • TN7125 (26)
  • TN7135 (26)
  • TN8025 (32)
  • TTI15 (9)
  • TTM (6)
  • TTM09 (13)
  • TTR (17)
  • TTS (16)
  • TTX (15)
  • WBH10C (24)
  • WBH10P (10)
  • WBH10U (19)
  • WBH20P (24)
  • WBH25P (17)
  • WBH25U (22)
  • WBH30P (10)
  • WBK40U (11)
  • WBK45U (15)
  • WDN00U (10)
  • WDN25U (12)
  • WK05CT (32)
  • WK15CT (18)
  • WK20CT (32)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (6)
  • WP15CT (32)
  • WP25CT (32)
  • WP35CT (32)
  • WS10PT (32)
  • WS25PT (32)
  • WU10HT (32)
  • WU10PT (18)
  • WU25PT (18)
  • X00511 (4)
  • X00580 (4)
  • X00581 (4)
  • X00582 (4)
  • X00583 (4)
  • X00584 (4)
  • X00585 (4)
  • X00586 (4)
  • X00591 (4)
  • X00592 (4)
  • X00593 (4)
  • X00594 (4)
  • X00596 (4)
  • X00597 (4)
  • X00599 (4)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (1)
  • R (6)
Wiper Insert
Wiper Insert
  • N (32)
  • Y (15)
F Dimension
F Dimension
  • 0.0 mm (1)
  • 38.0 mm (4)
  • 43.0 mm (9)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (1)
  • 1.496 in (4)
  • 1.693 in (9)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 86.0 mm (18)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.386 in (18)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (14)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (11)
  • NEGATIVE-ZERO (3)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (18)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (18)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (10)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (6)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (30)
  • B L (30)
  • C A (32)
  • C N (32)
  • D P (17)
  • H T (30)
  • H W (32)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (14)
System Size
System Size
  • KM4X63 (14)
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

DCLN 95° DCLN 95°

(4 Products)
  • Shank: KM4X™Shank: KM4X™
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5552674 KM4X63DCLNL12KC04 KM4X63DCLNL12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..120408/CN..432 1.40 3.09
    Ceníková cena:
    $468.34 /každý
    Vaše cena::
    5552675 KM4X63DCLNL16KC06 KM4X63DCLNL16KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..160612/CN..543 1.39 3.06
      Ceníková cena:
      $468.34 /každý
      Vaše cena::
      5552676 KM4X63DCLNR12KC04 KM4X63DCLNR12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..120408/CN..432 1.40 3.08
        Ceníková cena:
        $468.34 /každý
        Vaše cena::
        5543407 KM4X63DCLNR16KC06 KM4X63DCLNR16KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..160612/CN..543 1.37 3.02
          Ceníková cena:
          $468.34 /každý
          Vaše cena::
          Ceníková cena:
          Sleva: %
          Vaše cena::
          Výměna Tato položka není k dispozici
          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

          PŮVODNÍ PRODUKT

          DDQN 107° 30' DDQN 107° 30'

          (4 Products)
          • Shank: KM4X™Shank: KM4X™
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          Informace o produktech
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          5552679 KM4X63DDQNL15KC04 KM4X63DDQNL15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.29 2.84
            Ceníková cena:
            $468.34 /každý
            Vaše cena::
            5543452 KM4X63DDQNL15KC06 KM4X63DDQNL15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.29 2.83
              Ceníková cena:
              $468.34 /každý
              Vaše cena::
              5543453 KM4X63DDQNR15KC04 KM4X63DDQNR15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.29 2.85
                Ceníková cena:
                $468.34 /každý
                Vaše cena::
                5552710 KM4X63DDQNR15KC06 KM4X63DDQNR15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.29 2.85
                  Ceníková cena:
                  $468.34 /každý
                  Vaše cena::
                  Ceníková cena:
                  Sleva: %
                  Vaše cena::
                  Výměna Tato položka není k dispozici
                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                  PŮVODNÍ PRODUKT

                  DWLN 95° DWLN 95°

                  (2 Products)
                  • Shank: KM4X™Shank: KM4X™
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  Informace o produktech
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  5543455 KM4X63DWLNL08KC04 KM4X63DWLNL08KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 WN..080408/WN..432 1.46 3.22
                    Ceníková cena:
                    $468.34 /každý
                    Vaše cena::
                    5552726 KM4X63DWLNR08KC04 KM4X63DWLNR08KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 WN..080408/WN..432 1.45 3.20
                      Ceníková cena:
                      $468.34 /každý
                      Vaše cena::
                      Ceníková cena:
                      Sleva: %
                      Vaše cena::
                      Výměna Tato položka není k dispozici
                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                      PŮVODNÍ PRODUKT

                      DSRN 75° DSRN 75°

                      (2 Products)
                      • Shank: KM4X™Shank: KM4X™
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      Informace o produktech
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      5552716 KM4X63DSRNL12KC04 KM4X63DSRNL12KC04 70.0000 2.756 38.0000 1.496 SN..120408/SN..432 1.37 3.01
                        Ceníková cena:
                        $468.34 /každý
                        Vaše cena::
                        5552717 KM4X63DSRNR12KC04 KM4X63DSRNR12KC04 70.0000 2.756 38.0000 1.496 SN..120408/SN..432 1.37 3.01
                          Ceníková cena:
                          $468.34 /každý
                          Vaše cena::
                          Ceníková cena:
                          Sleva: %
                          Vaše cena::
                          Výměna Tato položka není k dispozici
                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                          PŮVODNÍ PRODUKT

                          DDUN 93° DDUN 93°

                          (3 Products)
                          • Shank: KM4X™Shank: KM4X™
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          Informace o produktech
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                          5552711 KM4X63DDUNL15KC04 KM4X63DDUNL15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.40 3.09
                            Ceníková cena:
                            $468.34 /každý
                            Vaše cena::
                            5552712 KM4X63DDUNR15KC04 KM4X63DDUNR15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.41 3.10
                              Ceníková cena:
                              $468.34 /každý
                              Vaše cena::
                              5543454 KM4X63DDUNR15KC06 KM4X63DDUNR15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.41 3.11
                                Ceníková cena:
                                $468.34 /každý
                                Vaše cena::
                                Ceníková cena:
                                Sleva: %
                                Vaše cena::
                                Výměna Tato položka není k dispozici
                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                PŮVODNÍ PRODUKT

                                DSDN 45° DSDN 45°

                                (1 Products)
                                • Shank: KM4X™Shank: KM4X™
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                Informace o produktech
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                5552713 KM4X63DSDNN12KC04 KM4X63DSDNN12KC04 70.0000 2.756 0.0000 .0000 SN..120408/SN..432 1.22 2.68
                                  Ceníková cena:
                                  $468.34 /každý
                                  Vaše cena::
                                  Ceníková cena:
                                  Sleva: %
                                  Vaše cena::
                                  Výměna Tato položka není k dispozici
                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                  PŮVODNÍ PRODUKT

                                  DTGN 90° DTGN 90°

                                  (2 Products)
                                  • Shank: KM4X™Shank: KM4X™
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  Informace o produktech
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  5552722 KM4X63DTGNL22KC04 KM4X63DTGNL22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                    Ceníková cena:
                                    $468.34 /každý
                                    Vaše cena::
                                    5552723 KM4X63DTGNR22KC04 KM4X63DTGNR22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                      Ceníková cena:
                                      $468.34 /každý
                                      Vaše cena::
                                      Ceníková cena:
                                      Sleva: %
                                      Vaše cena::
                                      Výměna Tato položka není k dispozici
                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                      PŮVODNÍ PRODUKT

                                      DSSN 45° DSSN 45°

                                      (2 Products)
                                      • Shank: KM4X™Shank: KM4X™
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      Informace o produktech
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [FS] Secondary F Dimension [FS] Secondary F Dimension Gage Insert Weight Kilograms Weight Pounds
                                      5552718 KM4X63DSSNL12KC04 KM4X63DSSNL12KC04 70.0000 2.756 78.3300 3.084 43.0000 1.693 34.6800 1.365 SN..120408/SN..432 1.41 3.11
                                        Ceníková cena:
                                        $468.34 /každý
                                        Vaše cena::
                                        5552719 KM4X63DSSNR12KC04 KM4X63DSSNR12KC04 70.0000 2.756 78.3300 3.084 43.0000 1.693 34.6800 1.365 SN..120408/SN..432 1.41 3.10
                                          Ceníková cena:
                                          $468.34 /každý
                                          Vaše cena::
                                          Ceníková cena:
                                          Sleva: %
                                          Vaše cena::
                                          Výměna Tato položka není k dispozici
                                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                          PŮVODNÍ PRODUKT

                                          DSKN 75° DSKN 75°

                                          (2 Products)
                                          • Shank: KM4X™Shank: KM4X™
                                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                          Informace o produktech
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                          5552714 KM4X63DSKNL12KC04 KM4X63DSKNL12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 SN..120408/SN..432 1.46 3.22
                                            Ceníková cena:
                                            $468.34 /každý
                                            Vaše cena::
                                            5552715 KM4X63DSKNR12KC04 KM4X63DSKNR12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 SN..120408/SN..432 1.47 3.24
                                              Ceníková cena:
                                              $468.34 /každý
                                              Vaše cena::
                                              Ceníková cena:
                                              Sleva: %
                                              Vaše cena::
                                              Výměna Tato položka není k dispozici
                                              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                              PŮVODNÍ PRODUKT

                                              DTFN 90° DTFN 90°

                                              (2 Products)
                                              • Shank: KM4X™Shank: KM4X™
                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                              Informace o produktech
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                              5552720 KM4X63DTFNL22KC04 KM4X63DTFNL22KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 TN..220408/TN..432 1.53 3.36
                                                Ceníková cena:
                                                $468.34 /každý
                                                Vaše cena::
                                                5552721 KM4X63DTFNR22KC04 KM4X63DTFNR22KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 TN..220408/TN..432 1.52 3.35
                                                  Ceníková cena:
                                                  $468.34 /každý
                                                  Vaše cena::
                                                  Ceníková cena:
                                                  Sleva: %
                                                  Vaše cena::
                                                  Výměna Tato položka není k dispozici
                                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                  PŮVODNÍ PRODUKT

                                                  DDJN 93° DDJN 93°

                                                  (4 Products)
                                                  • Shank: KM4X™Shank: KM4X™
                                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                  Informace o produktech