S-Clamping

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (11)
  • M Stainless Steel (11)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (11)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (11)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (11)
  • K Cast Iron (11)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (11)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (11)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (11)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (11)
    • N6
      Carbon, Graphite Composites, CFRP (11)
    • N7
      MMC's (11)
  • S High-Temp Alloys (11)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (11)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (11)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (11)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (11)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC (8)
    • H2
      Hardened Materials 48-55 HRC (8)
    • H3
      Hardened Materials 56-60 HRC (8)
    • H4
      Hardened Materials >60 HRC (8)
  • C CFRP Materials (11)
    • C1
      CFRP, CFRP / CFRP (11)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (11)
Applications
Applications
  • Facing Facing (9)
  • ID Facing ID Facing (9)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (7)
  • Turning Turning (9)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (11)
  • Lightly Interrupted Cut (11)
  • Smooth Cut (11)
  • Varying Depth of Cut (11)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (7)
  • 93.0 (2)
  • 95.0 (2)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (4)
  • 3.0 (4)
  • 4.0 (2)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (6)
  • 0.004 in (8)
  • 0.008 in (8)
  • 0.016 in (8)
  • 0.031 in (8)
  • 0.047 in (8)
  • 0.315 in (3)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (6)
  • 0.1 mm (8)
  • 0.2 mm (8)
  • 0.4 mm (8)
  • 0.8 mm (8)
  • 1.201 mm (8)
  • 8.0 mm (3)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (2)
  • HK1500 (2)
  • HK35 (2)
  • HT2 (8)
  • HTX (8)
  • HWK15 (2)
  • K10M (8)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K25M (2)
  • K25P (2)
  • K313 (11)
  • K68 (8)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (6)
  • KB1630 (2)
  • KB5610 (6)
  • KB5625 (6)
  • KB5630 (2)
  • KB9610 (6)
  • KBH10 (2)
  • KBH20 (8)
  • KC5010 (11)
  • KC5020P (2)
  • KC5025 (8)
  • KC5410 (8)
  • KC720 (8)
  • KC730 (11)
  • KC732 (8)
  • KC8050 (11)
  • KC810 (8)
  • KC850 (11)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (4)
  • KC9125 (8)
  • KC9225 (8)
  • KC9240 (11)
  • KC9240NEW (11)
  • KC9315 (11)
  • KC9320 (8)
  • KC9325 (6)
  • KC935 (8)
  • KC950 (6)
  • KC990 (4)
  • KCD25 (8)
  • KCK05 (8)
  • KCK05B (6)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (11)
  • KCK20B (11)
  • KCM15 (8)
  • KCM15B (4)
  • KCM25 (11)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (4)
  • KCP05 (8)
  • KCP05B (2)
  • KCP10 (8)
  • KCP10B (8)
  • KCP15 (2)
  • KCP25 (11)
  • KCP25B (8)
  • KCP25C (11)
  • KCP30 (8)
  • KCP30B (2)
  • KCP40B (2)
  • KCS10 (8)
  • KCS10B (8)
  • KCU10 (11)
  • KCU10B (11)
  • KCU25 (8)
  • KCU25B (8)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD1400 (6)
  • KD1405 (2)
  • KD1425 (6)
  • KT175 (2)
  • KT315 (8)
  • KT325 (8)
  • KTP10 (6)
  • KU10 (2)
  • KU10T (8)
  • KU30T (8)
  • NL300 (2)
  • NL920 (2)
  • PB100 (4)
  • PB170 (6)
  • PB250 (6)
  • PD100 (2)
  • PD50 (2)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (8)
  • THM-X (2)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (6)
  • TN2000 (4)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN4000 (2)
  • TN5015 (6)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (6)
  • TN6025 (4)
  • TN7005 (6)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (6)
  • TTI15 (2)
  • TTM09 (4)
  • TTR (6)
  • TTX (2)
  • W00342 (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (6)
  • WBH25P (2)
  • WBH25U (6)
  • WBH30P (2)
  • WBK45U (6)
  • WDN25U (6)
  • WK05CT (6)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WP15CT (8)
  • WP25CT (8)
  • WP35CT (4)
  • WS10PT (6)
  • WS25PT (4)
  • WU05PT (6)
  • WU10HT (8)
  • WU10PT (8)
  • WU25PT (8)
Hand Of Tool
Hand Of Tool
  • L (3)
  • N (1)
  • R (3)
Wiper Insert
Wiper Insert
  • N (11)
  • Y (2)
F Dimension
F Dimension
  • 8.0 mm (1)
  • 43.0 mm (6)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.315 in (1)
  • 1.693 in (6)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 86.0 mm (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.386 in (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (1)
  • S (6)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (4)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • R-ROUND (3)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.299 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 33.0 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (8)
  • D P (8)
  • H T (8)
  • H W (11)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (7)
System Size
System Size
  • KM4X63 (7)
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?