Top Thread™ and Top Groove™

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (8)
    • N6
      Carbon, Graphite Composites, CFRP (8)
    • N7
      MMC's (6)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC (8)
    • H2
      Hardened Materials 48-55 HRC (8)
    • H3
      Hardened Materials 56-60 HRC (8)
    • H4
      Hardened Materials >60 HRC (8)
Applications
Applications
  • Grooving Grooving (8)
  • ID Grooving ID Grooving (5)
Type of Thread
Type of Thread
  • 60 (8)
  • ACME (8)
  • API (8)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (8)
  • M (6)
  • NPT (6)
  • STUB ACME (6)
  • UN (8)
  • UNJ (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (6)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.047 in (7)
  • 2.441 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 52.0 mm (7)
  • 62.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (6)
  • 0.003 in (8)
  • 0.004 in (6)
  • 0.005 in (6)
  • 0.006 in (8)
  • 0.007 in (8)
  • 0.008 in (8)
  • 0.01 in (8)
  • 0.011 in (6)
  • 0.012 in (6)
  • 0.014 in (8)
  • 0.016 in (6)
  • 0.019 in (8)
  • 0.02 in (6)
  • 0.023 in (8)
  • 0.031 in (6)
  • 0.035 in (8)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.049 in (6)
  • 0.06 in (6)
  • 0.062 in (6)
  • 0.063 in (8)
  • 0.069 in (6)
  • 0.078 in (6)
  • 0.079 in (8)
  • 0.089 in (8)
  • 0.095 in (8)
  • 0.098 in (2)
  • 0.125 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (6)
  • 0.076 mm (8)
  • 0.1 mm (6)
  • 0.125 mm (6)
  • 0.151 mm (8)
  • 0.176 mm (8)
  • 0.2 mm (8)
  • 0.225 mm (6)
  • 0.25 mm (8)
  • 0.275 mm (6)
  • 0.301 mm (6)
  • 0.325 mm (8)
  • 0.351 mm (8)
  • 0.4 mm (6)
  • 0.45 mm (8)
  • 0.476 mm (3)
  • 0.5 mm (6)
  • 0.576 mm (8)
  • 0.775 mm (6)
  • 0.9 mm (8)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.25 mm (6)
  • 1.5 mm (6)
  • 1.576 mm (6)
  • 1.6 mm (8)
  • 1.75 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (8)
  • 2.25 mm (8)
  • 2.401 mm (8)
  • 2.5 mm (2)
  • 3.176 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (6)
  • K313 (8)
  • K420 (8)
  • K4H (6)
  • K68 (8)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (6)
  • KBH20 (3)
  • KC250 (6)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (8)
  • KC732 (6)
  • KC810 (8)
  • KC850 (8)
  • KC910 (6)
  • KC9110 (8)
  • KC9120 (6)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (3)
  • KD081 (6)
  • KD100 (6)
  • KD120 (8)
  • KD1425 (6)
  • KT175 (6)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (8)
  • THM (6)
  • TN10P (6)
  • TN6010 (8)
  • TN6025 (8)
  • TN7110 (8)
  • WU10HT (3)
  • WU10PT (2)
  • WU25PT (3)
Hand Of Tool
Hand Of Tool
  • L (1)
  • R (2)
F Dimension
F Dimension
  • 35.0 mm (3)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 1.379 in (3)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 64.0 mm (2)
  • 88.9 mm (2)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (1)
  • 222.3 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.253 in (1)
  • 2.441 in (3)
  • 2.52 in (2)
  • 3.5 in (2)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (1)
  • 8.752 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
Maximum Bore Depth
Maximum Bore Depth
  • 2.047 in (5)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 52.0 mm (5)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Cutting Width
Cutting Width
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.06 in (6)
  • 0.062 in (6)
  • 0.069 in (6)
  • 0.073 in (6)
  • 0.078 in (6)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (3)
  • 0.094 in (3)
  • 0.095 in (6)
  • 0.097 in (6)
  • 0.098 in (6)
  • 0.105 in (6)
  • 0.108 in (6)
  • 0.11 in (6)
  • 0.119 in (8)
  • 0.122 in (6)
  • 0.125 in (8)
  • 0.126 in (8)
  • 0.128 in (6)
  • 0.131 in (3)
  • 0.138 in (8)
  • 0.143 in (6)
  • 0.156 in (6)
  • 0.157 in (8)
  • 0.167 in (8)
  • 0.169 in (6)
  • 0.177 in (8)
  • 0.178 in (6)
  • 0.185 in (8)
  • 0.188 in (8)
  • 0.189 in (8)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (6)
  • 0.196 in (6)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (2)
  • 0.256 in (2)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.5 mm (6)
  • 1.576 mm (6)
  • 1.75 mm (6)
  • 1.826 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.225 mm (6)
  • 2.25 mm (3)
  • 2.375 mm (3)
  • 2.401 mm (6)
  • 2.475 mm (6)
  • 2.5 mm (6)
  • 2.676 mm (6)
  • 2.75 mm (6)
  • 2.801 mm (6)
  • 3.0 mm (8)
  • 3.1 mm (6)
  • 3.176 mm (8)
  • 3.2 mm (8)
  • 3.25 mm (6)
  • 3.325 mm (3)
  • 3.5 mm (8)
  • 3.6 mm (6)
  • 3.95 mm (6)
  • 3.975 mm (3)
  • 4.0 mm (8)
  • 4.25 mm (8)
  • 4.3 mm (6)
  • 4.5 mm (8)
  • 4.525 mm (6)
  • 4.7 mm (8)
  • 4.775 mm (8)
  • 4.801 mm (8)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (6)
  • 4.976 mm (6)
  • 5.0 mm (2)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.575 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (2)
  • 6.5 mm (2)
Cutting Width Min komu Cutting Width Max
Insert Size
Insert Size
  • 3 (6)
  • 4 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (4)
  • 0.294 in (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (4)
  • 7.476 mm (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (6)
  • C N (8)
  • D P (6)
  • H T (8)
  • H W (8)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (3)
System Size
System Size
  • PSC50 (3)
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?