Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

PSC 50 Internal Cutting Units

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (54)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (54)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (54)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (54)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (54)
  • M Stainless Steel (54)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (54)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (54)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (54)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (54)
  • N Non-Ferrous Materials (52)
    • N1
      Wrought Aluminum
      (52)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (52)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (38)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (52)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (52)
    • N6
      Carbon, Graphite Composites, CFRP
      (46)
    • N7
      MMC's
      (52)
  • S High-Temp Alloys (54)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (54)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (54)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (54)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (54)
  • H Hardened Materials (46)
    • H1
      Hardened Materials 44-48 HRC
      (46)
    • H2
      Hardened Materials 48-55 HRC
      (40)
    • H3
      Hardened Materials 56-60 HRC
      (38)
    • H4
      Hardened Materials >60 HRC
      (38)
Applications
Applications
  • Facing Facing (41)
  • ID Facing ID Facing (41)
  • ID Grooving ID Grooving (7)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (41)
  • Plunge Turning Plunge Turning (28)
  • TRN Boring TRN Boring (41)
  • Turning Turning (41)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (13)
  • ACME (11)
  • API (6)
  • API BUTTRESS (1)
  • API RD (9)
  • BSPT (5)
  • BSW (10)
  • BUTTRESS (7)
  • M (12)
  • NPT (9)
  • NPTF (5)
  • RD DIN 405 (6)
  • STUB ACME (10)
  • TR DIN 103 (6)
  • UN (12)
  • UNJ (9)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (21)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (1)
  • 90.0 (13)
  • 93.0 (13)
  • 95.0 (21)
  • 107.5 (6)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (37)
  • 2.0 (44)
  • 3.0 (7)
  • 4.0 (32)
  • 6.0 (1)
  • 8.0 (15)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (4)
  • 0.002 in (23)
  • 0.003 in (12)
  • 0.004 in (45)
  • 0.005 in (4)
  • 0.006 in (10)
  • 0.007 in (7)
  • 0.008 in (43)
  • 0.01 in (7)
  • 0.011 in (4)
  • 0.012 in (5)
  • 0.014 in (10)
  • 0.016 in (45)
  • 0.017 in (5)
  • 0.019 in (5)
  • 0.02 in (6)
  • 0.023 in (5)
  • 0.024 in (1)
  • 0.028 in (3)
  • 0.03 in (2)
  • 0.031 in (47)
  • 0.035 in (5)
  • 0.037 in (4)
  • 0.039 in (6)
  • 0.047 in (46)
  • 0.049 in (6)
  • 0.055 in (1)
  • 0.06 in (6)
  • 0.062 in (14)
  • 0.063 in (32)
  • 0.069 in (6)
  • 0.078 in (4)
  • 0.079 in (5)
  • 0.089 in (5)
  • 0.094 in (2)
  • 0.095 in (8)
  • 0.098 in (1)
  • 0.125 in (1)
  • 0.126 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (4)
  • 0.05 mm (23)
  • 0.076 mm (12)
  • 0.1 mm (45)
  • 0.125 mm (4)
  • 0.151 mm (10)
  • 0.176 mm (7)
  • 0.2 mm (43)
  • 0.225 mm (4)
  • 0.25 mm (7)
  • 0.275 mm (4)
  • 0.301 mm (5)
  • 0.325 mm (5)
  • 0.351 mm (10)
  • 0.4 mm (45)
  • 0.426 mm (5)
  • 0.45 mm (5)
  • 0.476 mm (1)
  • 0.5 mm (6)
  • 0.576 mm (5)
  • 0.601 mm (1)
  • 0.701 mm (3)
  • 0.75 mm (2)
  • 0.775 mm (6)
  • 0.8 mm (41)
  • 0.9 mm (5)
  • 0.925 mm (4)
  • 1.0 mm (6)
  • 1.201 mm (46)
  • 1.25 mm (6)
  • 1.401 mm (1)
  • 1.5 mm (6)
  • 1.576 mm (14)
  • 1.6 mm (32)
  • 1.75 mm (6)
  • 1.975 mm (4)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.375 mm (2)
  • 2.401 mm (8)
  • 2.5 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (18)
  • 241 (10)
  • CL4 (16)
  • CM2 (18)
  • CM3 (16)
  • CM4 (13)
  • CPX (18)
  • CW2 (15)
  • CW2015 (18)
  • CW5025 (19)
  • GH1 (1)
  • GX (11)
  • HCK10 (8)
  • HCK20 (3)
  • HK1500 (30)
  • HK35 (2)
  • HT2 (35)
  • HTX (24)
  • HWK15 (8)
  • K00331 (3)
  • K060 (11)
  • K090 (18)
  • K1 (10)
  • K1010P (1)
  • K10M (27)
  • K10P (21)
  • K10U (31)
  • K15 (6)
  • K15U (31)
  • K20K (20)
  • K21 (11)
  • K25M (33)
  • K25P (26)
  • K2885 (6)
  • K313 (46)
  • K35P (9)
  • K420 (21)
  • K45 (11)
  • K4H (4)
  • K68 (42)
  • KB1340 (17)
  • KB1345 (22)
  • KB1610 (26)
  • KB1625 (18)
  • KB1630 (21)
  • KB5610 (25)
  • KB5625 (29)
  • KB5630 (24)
  • KB9610 (31)
  • KB9640 (18)
  • KBH10 (31)
  • KBH10B (15)
  • KBH20 (32)
  • KBH20B (15)
  • KBK35 (10)
  • KC210 (16)
  • KC250 (19)
  • KC5010 (51)
  • KC5020P (8)
  • KC5025 (52)
  • KC5410 (40)
  • KC5510 (25)
  • KC5525 (22)
  • KC710 (21)
  • KC720 (41)
  • KC722 (20)
  • KC730 (49)
  • KC7310 (27)
  • KC732 (32)
  • KC8050 (41)
  • KC810 (46)
  • KC850 (48)
  • KC9010 (35)
  • KC9025 (41)
  • KC910 (37)
  • KC9105 (39)
  • KC9110 (48)
  • KC9120 (38)
  • KC9125 (41)
  • KC9125RR (1)
  • KC9140 (27)
  • KC9145 (19)
  • KC9210 (5)
  • KC9215 (27)
  • KC9225 (41)
  • KC9240 (41)
  • KC9240NEW (41)
  • KC9245 (27)
  • KC9315 (41)
  • KC9320 (46)
  • KC9325 (32)
  • KC935 (48)
  • KC950 (40)
  • KC990 (35)
  • KCD25 (13)
  • KCK05 (41)
  • KCK05B (38)
  • KCK15 (38)
  • KCK15B (41)
  • KCK20 (44)
  • KCK20B (46)
  • KCM15 (41)
  • KCM15B (41)
  • KCM25 (41)
  • KCM25B (39)
  • KCM35 (33)
  • KCM35B (26)
  • KCP05 (39)
  • KCP05B (35)
  • KCP10 (41)
  • KCP10B (48)
  • KCP15 (6)
  • KCP25 (41)
  • KCP25B (48)
  • KCP25C (41)
  • KCP30 (41)
  • KCP30B (25)
  • KCP40 (19)
  • KCP40B (27)
  • KCPK05 (25)
  • KCS10 (24)
  • KCS10B (39)
  • KCU10 (48)
  • KCU10B (41)
  • KCU25 (46)
  • KD050 (25)
  • KD081 (28)
  • KD100 (20)
  • KD120 (16)
  • KD1400 (25)
  • KD1405 (16)
  • KD1425 (29)
  • KM1 (11)
  • KMF (10)
  • KS15 (10)
  • KT1120 (10)
  • KT125 (17)
  • KT150 (11)
  • KT175 (36)
  • KT315 (46)
  • KT325 (35)
  • KTP10 (14)
  • KU10 (14)
  • KU10T (44)
  • KU25T (10)
  • KU30T (46)
  • KY1310 (14)
  • KY1320 (19)
  • KY1540 (11)
  • KY1615 (18)
  • KY2000 (13)
  • KY2100 (11)
  • KY3000 (23)
  • KY3400 (14)
  • KY3500 (19)
  • KY4000 (13)
  • KY4300 (12)
  • KY4400 (19)
  • KYHK15B (19)
  • KYK10 (12)
  • KYK25 (14)
  • KYK35 (19)
  • KYS25 (11)
  • KYS30 (12)
  • NL200 (15)
  • NL250 (25)
  • NL300 (18)
  • NL400 (13)
  • NL920 (23)
  • P25 (17)
  • PB100 (11)
  • PB170 (10)
  • PB250 (11)
  • PB300 (10)
  • PD100 (8)
  • PD50 (2)
  • PS5 (21)
  • SP0819 (18)
  • SP0A00 (1)
  • SP3019 (14)
  • SP4019 (14)
  • SP4066 (2)
  • SP61EJ (1)
  • SPN3W1 (6)
  • THM (31)
  • THM-X (23)
  • THMF-X (11)
  • TN10P (45)
  • TN10U (31)
  • TN15M (35)
  • TN15U (31)
  • TN2000 (30)
  • TN20K (33)
  • TN20P (41)
  • TN30M (41)
  • TN30P (19)
  • TN4000 (29)
  • TN5015 (32)
  • TN5020 (39)
  • TN5105 (30)
  • TN5120 (39)
  • TN6010 (29)
  • TN6025 (37)
  • TN7005 (37)
  • TN7010 (41)
  • TN7015 (41)
  • TN7025 (41)
  • TN7035 (33)
  • TN7105 (36)
  • TN7110 (46)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (33)
  • TN8025 (33)
  • TTI15 (34)
  • TTM (6)
  • TTM09 (1)
  • TTR (18)
  • TTS (22)
  • TTX (29)
  • W00342 (2)
  • WBH10C (30)
  • WBH10P (24)
  • WBH10U (26)
  • WBH20P (25)
  • WBH25P (25)
  • WBH25U (24)
  • WBH30P (24)
  • WBK40U (17)
  • WBK45U (22)
  • WDN00U (16)
  • WDN25U (25)
  • WK05CT (33)
  • WK15CT (30)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WM35CT (25)
  • WP05CT (11)
  • WP15CT (39)
  • WP20TT (7)
  • WP25CT (39)
  • WP35CT (39)
  • WS10PT (32)
  • WS25PT (32)
  • WU05PT (8)
  • WU10HT (40)
  • WU10PT (37)
  • WU25PT (40)
  • X00511 (10)
  • X00580 (10)
  • X00581 (10)
  • X00582 (10)
  • X00583 (10)
  • X00584 (10)
  • X00585 (10)
  • X00586 (10)
  • X00591 (10)
  • X00592 (10)
  • X00593 (10)
  • X00594 (10)
  • X00596 (10)
  • X00597 (10)
  • X00599 (10)
Hand Of Tool
Hand Of Tool
  • L (26)
  • R (28)
Wiper Insert
Wiper Insert
  • N (54)
  • Y (30)
F Dimension
F Dimension
  • 11.0 mm (4)
  • 12.0 mm (2)
  • 13.0 mm (5)
  • 14.0 mm (1)
  • 17.0 mm (16)
  • 18.0 mm (2)
  • 22.0 mm (8)
  • 27.0 mm (9)
  • 35.0 mm (7)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.433 in (4)
  • 0.473 in (2)
  • 0.512 in (5)
  • 0.551 in (1)
  • 0.669 in (16)
  • 0.709 in (2)
  • 0.866 in (8)
  • 1.063 in (9)
  • 1.379 in (7)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 20.0 mm (6)
  • 24.0 mm (1)
  • 25.0 mm (5)
  • 32.0 mm (14)
  • 33.0 mm (3)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 40.0 mm (6)
  • 48.5 mm (1)
  • 50.0 mm (7)
  • 52.5 mm (1)
  • 63.0 mm (7)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.787 in (6)
  • 0.946 in (1)
  • 0.984 in (5)
  • 1.26 in (14)
  • 1.299 in (3)
  • 1.319 in (1)
  • 1.516 in (2)
  • 1.575 in (6)
  • 1.909 in (1)
  • 1.969 in (7)
  • 2.067 in (1)
  • 2.48 in (7)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (21)
  • E (20)
  • S (13)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (33)
  • NEGATIVE-ZERO (14)
Maximum Bore Depth
Maximum Bore Depth
  • 1.417 in (3)
  • 1.811 in (3)
  • 1.85 in (2)
  • 2.008 in (1)
  • 2.205 in (4)
  • 2.52 in (3)
  • 2.598 in (5)
  • 2.638 in (10)
  • 3.15 in (1)
  • 3.465 in (6)
  • 3.48 in (1)
  • 3.938 in (2)
  • 4.449 in (2)
  • 4.646 in (2)
  • 4.686 in (4)
  • 5.906 in (5)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 36.0 mm (3)
  • 46.0 mm (3)
  • 47.0 mm (2)
  • 51.0 mm (1)
  • 56.0 mm (4)
  • 64.0 mm (3)
  • 66.0 mm (5)
  • 67.0 mm (10)
  • 80.0 mm (1)
  • 88.0 mm (6)
  • 88.4 mm (1)
  • 100.0 mm (2)
  • 113.0 mm (2)
  • 118.0 mm (2)
  • 119.0 mm (4)
  • 150.0 mm (5)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • D (7)
  • N (7)
  • P (20)
  • S (20)
Cutting Width
Cutting Width
  • 0.02 in (2)
  • 0.031 in (2)
  • 0.035 in (2)
  • 0.039 in (6)
  • 0.041 in (2)
  • 0.047 in (6)
  • 0.055 in (2)
  • 0.058 in (2)
  • 0.06 in (6)
  • 0.061 in (2)
  • 0.062 in (6)
  • 0.067 in (2)
  • 0.069 in (6)
  • 0.073 in (4)
  • 0.077 in (2)
  • 0.078 in (4)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (5)
  • 0.094 in (1)
  • 0.095 in (6)
  • 0.097 in (4)
  • 0.098 in (6)
  • 0.105 in (4)
  • 0.108 in (6)
  • 0.11 in (4)
  • 0.119 in (7)
  • 0.122 in (4)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (6)
  • 0.129 in (2)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (4)
  • 0.147 in (2)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.156 in (4)
  • 0.157 in (5)
  • 0.167 in (5)
  • 0.169 in (4)
  • 0.177 in (5)
  • 0.178 in (4)
  • 0.185 in (5)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (4)
  • 0.197 in (1)
  • 0.202 in (1)
  • 0.213 in (1)
  • 0.217 in (1)
  • 0.219 in (1)
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.255 in (1)
Cutting Width Min komu Cutting Width Max