Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (14)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (14)
- H1Hardened Materials 44-48 HRC(14)
- H2Hardened Materials 48-55 HRC(14)
- H3Hardened Materials 56-60 HRC(14)
- H4Hardened Materials >60 HRC(14)
- C CFRP Materials (14)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (14)
Applications
Applications
Facing (14)
ID Facing (14)
Multiple Direction Cutting (14)
Plunge Turning (8)
TRN Boring (14)
Turning (14)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (2)
- 95.0 (6)
- 107.5 (6)
komu
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (14)
- 2.0 (14)
- 4.0 (7)
komu
Over All Length [L]
Over All Length [L]
- 2.7559 in(3)
- 3.1496 in(2)
- 3.5433 in(5)
- 4.3307 in(2)
- 5.5118 in(1)
- 5.9055 in(1)
komu
Over All Length [L]
Over All Length [L]
- 70.0 mm(3)
- 80.0 mm(2)
- 90.0 mm(5)
- 110.0 mm(2)
- 140.0 mm(1)
- 150.0 mm(1)
komu
Corner Radius
Corner Radius
- 0.0 in(8)
- 0.001 in(8)
- 0.002 in(14)
- 0.003 in(1)
- 0.004 in(14)
- 0.008 in(14)
- 0.016 in(14)
- 0.031 in(14)
- 0.047 in(13)
- 0.063 in(6)
komu
Corner Radius
Corner Radius
- 0.0 mm(8)
- 0.025 mm(8)
- 0.05 mm(14)
- 0.075 mm(1)
- 0.1 mm(14)
- 0.2 mm(14)
- 0.4 mm(14)
- 0.8 mm(14)
- 1.2 mm(13)
- 1.6 mm(6)
komu
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (1)
- HWK15 (1)
- K313 (14)
- K68 (6)
- KB1345 (7)
- KB1610 (7)
- KB1630 (6)
- KB5610 (7)
- KB5630 (14)
- KBH10 (14)
- KBH20 (14)
- KC5010 (14)
- KC5025 (14)
- KC5410 (14)
- KC730 (14)
- KC850 (14)
- KCK05 (13)
- KCK05B (7)
- KCK15 (13)
- KCK15B (13)
- KCK20 (14)
- KCK20B (13)
- KCM15 (8)
- KCM15B (14)
- KCM25 (14)
- KCM25B (14)
- KCM25S (8)
- KCM35 (14)
- KCM35B (6)
- KCP05 (14)
- KCP05B (12)
- KCP10 (14)
- KCP10B (14)
- KCP15 (6)
- KCP20S (8)
- KCP25 (14)
- KCP25B (14)
- KCP25C (14)
- KCP30 (14)
- KCP40B (6)
- KCS10 (14)
- KCS10B (14)
- KCS25S (8)
- KCU10 (14)
- KCU10B (14)
- KCU25 (14)
- KCU25B (14)
- KD1400 (14)
- KD1405 (6)
- KD1425 (14)
- KN10S (8)
- KT315 (14)
- KT325 (14)
- KTP10 (14)
- KTP25S (14)
- SP4019 (2)
- THM (14)
- THM-X (7)
- TN10P (13)
- TN10U (14)
- TN15M (13)
- TN15U (12)
- TN2000 (13)
- TN20K (14)
- TN20P (14)
- TN30M (14)
- TN4000 (12)
- TN6010 (7)
- TN6025 (7)
- WBH10P (14)
- WBH10U (6)
- WBH20P (8)
- WBH30P (13)
- WDN00U (6)
- WDN25U (14)
- WK05CT (6)
- WK15CT (13)
- WK20CT (13)
- WM15CT (13)
- WM25CT (14)
- WP15CT (14)
- WP20TT (1)
- WP25CT (14)
- WP35CT (12)
- WS10PT (7)
- WS25PT (7)
- WU05PT (8)
- WU10HT (14)
- WU10PT (13)
- WU25PT (14)
Hand Of Tool
Hand Of Tool
- L (6)
- R (8)
Wiper Insert
Wiper Insert
- N (14)
- Y (7)
F Dimension
F Dimension
- 11.0 mm(3)
- 13.0 mm(2)
- 17.0 mm(3)
- 18.0 mm(2)
- 22.0 mm(2)
- 27.0 mm(1)
- 35.0 mm(1)
komu
F Dimension
F Dimension
- 0.4331 in(3)
- 0.5118 in(2)
- 0.6693 in(3)
- 0.7087 in(2)
- 0.8661 in(2)
- 1.063 in(1)
- 1.378 in(1)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 20.0 mm(3)
- 25.0 mm(2)
- 32.0 mm(3)
- 33.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(1)
- 63.0 mm(1)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.7874 in(3)
- 0.9843 in(2)
- 1.2598 in(3)
- 1.2992 in(2)
- 1.5748 in(2)
- 1.9685 in(1)
- 2.4803 in(1)
komu
Cutting Direction
Cutting Direction
- B (6)
- E (8)
Maximum Bore Depth
Maximum Bore Depth
- 1.811 in(3)
- 2.2047 in(2)
- 2.6378 in(5)
- 3.4646 in(2)
- 4.685 in(1)
- 5.9055 in(1)
komu
Maximum Bore Depth
Maximum Bore Depth
- 46.0 mm(3)
- 56.0 mm(2)
- 67.0 mm(5)
- 88.0 mm(2)
- 119.0 mm(1)
- 150.0 mm(1)
komu
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (2)
- V-DIAMOND/RHOMBIC 35 (6)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (14)
- B L (14)
- D P (14)
- H T (14)
- H W (14)
backEnd
System Size
System Size
- PSC50 (6)
No filters matching ""
