Návrhy produktů

Product Family suggestions

úspěšně přidáno do košíku
Zobrazit košík

Oznámení

Označit vše jako přečtené
Mobile Menu

Toolholders

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (131)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (131)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (131)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (131)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (131)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (131)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (131)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (131)
  • M Stainless Steel (131)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (131)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (131)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (131)
  • K Cast Iron (131)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (131)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (131)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (131)
  • N Non-Ferrous Materials (131)
    • N1
      Wrought Aluminum
      (131)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (131)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (131)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (87)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (131)
    • N6
      Carbon, Graphite Composites, CFRP
      (131)
    • N7
      MMC's
      (87)
  • S High-Temp Alloys (131)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (131)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (131)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (131)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (131)
  • H Hardened Materials (53)
    • H1
      Hardened Materials 44-48 HRC
      (53)
    • H2
      Hardened Materials 48-55 HRC
      (53)
Select All Star
  • DE (3)
  • IN (1)
  • US (22)
Applications
Applications
  • Face Grooving Face Grooving (118)
  • Grooving Grooving (128)
  • OD Thread Turning OD Thread Turning (130)
  • Threading Threading (128)
Type of Thread
Type of Thread
  • 60 (120)
  • ACME (86)
  • API RD (46)
  • BSW (24)
  • BUTTRESS (22)
  • STUB ACME (46)
  • UN (103)
  • UNJ (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (124)
  • Lightly Interrupted Cut (124)
  • Smooth Cut (124)
  • Varying Depth of Cut (124)
Connection Style
Connection Style
  • Toolholder (89)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (120)
  • 2.0 (131)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (67)
  • 0.004 in (63)
  • 0.006 in (16)
  • 0.007 in (100)
  • 0.008 in (120)
  • 0.01 in (45)
  • 0.012 in (24)
  • 0.014 in (83)
  • 0.017 in (46)
  • 0.02 in (41)
  • 0.023 in (79)
  • 0.03 in (41)
  • 0.031 in (87)
  • 0.039 in (87)
  • 0.047 in (87)
  • 0.049 in (87)
  • 0.06 in (87)
  • 0.062 in (46)
  • 0.063 in (79)
  • 0.069 in (87)
  • 0.078 in (46)
  • 0.079 in (79)
  • 0.089 in (79)
  • 0.095 in (79)
  • 0.098 in (33)
  • 0.125 in (33)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (67)
  • 0.1 mm (63)
  • 0.151 mm (16)
  • 0.176 mm (100)
  • 0.2 mm (120)
  • 0.225 mm (24)
  • 0.25 mm (45)
  • 0.301 mm (24)
  • 0.325 mm (83)
  • 0.351 mm (46)
  • 0.426 mm (46)
  • 0.5 mm (41)
  • 0.576 mm (79)
  • 0.75 mm (41)
  • 0.775 mm (87)
  • 1.0 mm (87)
  • 1.201 mm (87)
  • 1.25 mm (87)
  • 1.5 mm (87)
  • 1.576 mm (46)
  • 1.6 mm (79)
  • 1.75 mm (87)
  • 1.975 mm (46)
  • 2.0 mm (79)
  • 2.25 mm (79)
  • 2.401 mm (79)
  • 2.5 mm (33)
  • 3.176 mm (33)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (87)
  • TN10P (83)
  • TN6010 (120)
  • TN6025 (131)
  • TN7110 (120)
  • WU10HT (24)
  • WU10PT (53)
  • WU25PT (22)
Hand Of Tool
Hand Of Tool
  • L (42)
  • R (47)
Wiper Insert
Wiper Insert
  • N (131)
F Dimension
F Dimension
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 14.0 mm (1)
  • 14.275 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 22.225 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (7)
  • 31.75 mm (19)
  • 32.0 mm (8)
  • 38.1 mm (12)
  • 40.0 mm (5)
  • 50.801 mm (10)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.551 in (1)
  • 0.562 in (2)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.875 in (2)
  • 0.984 in (3)
  • 1.0 in (7)
  • 1.25 in (19)
  • 1.26 in (8)
  • 1.5 in (12)
  • 1.575 in (5)
  • 2.0 in (10)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (80)
  • 41.301 mm (39)
  • 47.6 mm (39)
  • 55.875 mm (3)
  • 57.2 mm (27)
  • 60.325 mm (2)
  • 63.5 mm (4)
  • 76.2 mm (2)
  • 88.9 mm (43)
  • 139.701 mm (39)
  • 174.601 mm (39)
  • 209.601 mm (27)
  • 222.3 mm (27)
  • 333.0 mm (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (80)
  • 1.627 in (39)
  • 1.874 in (39)
  • 2.2 in (3)
  • 2.253 in (27)
  • 2.375 in (2)
  • 2.5 in (4)
  • 3.0 in (2)
  • 3.5 in (43)
  • 5.5 in (39)
  • 6.875 in (39)
  • 8.252 in (27)
  • 8.752 in (27)
  • 13.11 in (4)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (124)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (124)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (89)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (89)
Maximum Bore Depth
Maximum Bore Depth
  • 0.5 in (2)
  • 1.0 in (9)
  • 2.0 in (31)
  • 2.5 in (2)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 12.701 mm (2)
  • 25.401 mm (9)
  • 50.801 mm (31)
  • 63.5 mm (2)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (41)
  • 0.031 in (41)
  • 0.039 in (87)
  • 0.041 in (21)
  • 0.047 in (87)
  • 0.055 in (41)
  • 0.058 in (41)
  • 0.06 in (87)
  • 0.061 in (21)
  • 0.062 in (87)
  • 0.067 in (41)
  • 0.069 in (87)
  • 0.073 in (46)
  • 0.077 in (41)
  • 0.078 in (46)
  • 0.079 in (87)
  • 0.088 in (87)
  • 0.089 in (87)
  • 0.095 in (87)
  • 0.098 in (87)
  • 0.108 in (87)
  • 0.119 in (120)
  • 0.125 in (120)
  • 0.126 in (46)
  • 0.128 in (87)
  • 0.138 in (120)
  • 0.147 in (21)
  • 0.152 in (41)
  • 0.156 in (46)
  • 0.157 in (79)
  • 0.167 in (46)
  • 0.177 in (79)
  • 0.188 in (62)
  • 0.189 in (79)
  • 0.192 in (24)
  • 0.193 in (24)
  • 0.195 in (46)
  • 0.197 in (37)
  • 0.217 in (33)
  • 0.237 in (33)
  • 0.25 in (33)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (41)
  • 0.775 mm (41)
  • 0.8 mm (41)
  • 1.0 mm (87)
  • 1.05 mm (21)
  • 1.201 mm (87)
  • 1.401 mm (41)
  • 1.475 mm (41)
  • 1.5 mm (87)
  • 1.55 mm (21)
  • 1.576 mm (87)
  • 1.701 mm (41)
  • 1.75 mm (87)
  • 1.826 mm (46)
  • 1.951 mm (41)
  • 1.975 mm (46)
  • 2.0 mm (87)
  • 2.2 mm (87)
  • 2.25 mm (87)
  • 2.401 mm (87)
  • 2.5 mm (87)
  • 2.75 mm (87)
  • 3.0 mm (120)
  • 3.176 mm (120)
  • 3.2 mm (46)
  • 3.25 mm (87)
  • 3.5 mm (120)
  • 3.725 mm (21)
  • 3.85 mm (41)
  • 3.95 mm (46)
  • 3.975 mm (24)
  • 4.0 mm (79)
  • 4.25 mm (46)
  • 4.5 mm (79)
  • 4.775 mm (62)
  • 4.801 mm (79)
  • 4.875 mm (24)
  • 4.9 mm (24)
  • 4.95 mm (46)
  • 5.0 mm (37)
  • 5.5 mm (33)
  • 6.0 mm (33)
  • 6.351 mm (33)
Cutting Width Min komu Cutting Width Max
Insert Size
Insert Size
  • 1 (3)
  • 2 (49)
  • 3 (49)
  • 4 (24)
  • 5 (5)
  • 6 (3)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (41)
  • 0.15 in (2)
  • 0.21 in (44)
  • 0.225 in (1)
  • 0.25 in (2)
  • 0.294 in (31)
  • 0.3 in (2)
  • 0.334 in (5)
  • 0.416 in (5)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (41)
  • 3.801 mm (2)
  • 5.325 mm (44)
  • 5.726 mm (1)
  • 6.351 mm (2)
  • 7.476 mm (31)
  • 7.625 mm (2)
  • 8.475 mm (5)
  • 10.55 mm (5)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H W (131)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (89)
Shank Height
Shank Height
  • 0.375 in (4)
  • 0.394 in (3)
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (6)
  • 0.63 in (3)
  • 0.75 in (7)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (14)
  • 1.25 in (15)
  • 1.26 in (6)
  • 1.5 in (12)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 9.525 mm (4)
  • 10.0 mm (3)
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (6)
  • 16.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (14)
  • 31.75 mm (15)
  • 32.0 mm (6)
  • 38.1 mm (12)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.375 in (4)
  • 0.394 in (3)
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (6)
  • 0.63 in (3)
  • 0.75 in (7)
  • 0.787 in (4)
  • 0.984 in (7)
  • 1.0 in (19)
  • 1.25 in (12)
  • 1.26 in (5)
  • 1.5 in (10)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 9.525 mm (4)
  • 10.0 mm (3)
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (6)
  • 16.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (4)
  • 25.0 mm (7)
  • 25.401 mm (19)
  • 31.75 mm (12)
  • 32.0 mm (5)
  • 38.1 mm (10)
Shank Width Min komu Shank Width Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

Integrální držáky nástrojů • NS • Metrické Integrální držáky nástrojů • NS • Metrické

Držáky nástrojů
(45 Products)
  • Face GroovingFace Grooving
  • GroovingGrooving
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert
3632145 NSL122B NSL122B W   2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L
    Ceníková cena:
    $106.50 /každý
    Vaše cena::
    3632138 NSL162C NSL162C W   2 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L
      Ceníková cena:
      $109.92 /každý
      Vaše cena::
      3638591 NSR163D NSR163D W   3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.750 1.250 12.7000 .5000 5.3340 .2100 N.3R
        Ceníková cena:
        $111.49 /každý
        Vaše cena::
        3638590 NSR2525M2 NSR2525M2 W   2 25.0000 .9843 25.0000 .9843 32.0000 1.259 150.0000 5.905 19.000 .7480 8.8000 .3465 3.5100 .1382 N.2R
          Ceníková cena:
          $110.70 /každý
          Vaše cena::
          3636536 NSR2525M3 NSR2525M3 W   3 25.0000 .9843 25.0000 .9843 32.0000 1.259 150.0000 5.905 32.000 1.259 12.6000 .4961 5.3300 .2098 N.3R
            Ceníková cena:
            $111.10 /každý
            Vaše cena::
            3636540 NSR2525M4 NSR2525M4 W   4 25.0000 .9843 25.0000 .9843 32.0000 1.259 150.0000 5.905 35.000 1.378 13.7000 .5394 7.4700 .2941 N.4R
              Ceníková cena:
              $111.10 /každý
              Vaše cena::
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

              PŮVODNÍ PRODUKT

              Integrální držáky nástrojů • NE Integrální držáky nástrojů • NE

              Držáky nástrojů
              (44 Products)
              • ThreadingThreading
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert
              3632144 NEL123B NEL123B W   3 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R
                Tato položka není k dispozici
                Tato položka může být k dispozici prostřednictvím distributora
                Vaše cena::
                3639041 NEL163D NEL163D W   3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R
                  Ceníková cena:
                  $111.28 /každý
                  Vaše cena::
                  3632154 NEL203D NEL203D W   3 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 19.050 .7500 50.8000 2.000 6.6040 .2600 5.3340 .2100 N.3R
                    Tato položka není k dispozici
                    Tato položka může být k dispozici prostřednictvím distributora
                    Vaše cena::
                    3632156 NER122B NER122B W   2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 12.700 .5000 25.4000 1.000 7.3660 .2900 3.5050 .1380 N.2L
                      Tato položka není k dispozici
                      Tato položka může být k dispozici prostřednictvím distributora
                      Vaše cena::
                      3632133 NER123B NER123B W   3 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3L
                        Ceníková cena:
                        $106.50 /každý
                        Vaše cena::
                        3632157 NER204D NER204D W   4 31.7500 1.250 31.7500 1.250 41.2750 1.625 152.4000 6.000 19.050 .7500 50.8000 2.000 6.8580 .2700 7.4680 .2940 N.4L
                          Tato položka není k dispozici
                          Tato položka může být k dispozici prostřednictvím distributora
                          Vaše cena::
                          Ceníková cena:
                          Sleva: %
                          Vaše cena::
                          Výměna Tato položka není k dispozici
                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                          PŮVODNÍ PRODUKT

                          Integrální držáky nástrojů • NAS Integrální držáky nástrojů • NAS

                          Držáky nástrojů
                          (16 Products)
                          • Face GroovingFace Grooving
                          • GroovingGrooving
                          Informace o produktech
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [B3] Head Back Offset [B3] Head Back Offset [L3] Head Back Length [L3] Head Back Length Gage Insert
                          3637497 NASL083D NASL083D W   3 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.750 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3L
                            Tato položka není k dispozici
                            Tato položka může být k dispozici prostřednictvím distributora
                            Vaše cena::
                            3637489 NASL102B NASL102B W   2 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L
                              Tato položka není k dispozici
                              Tato položka může být k dispozici prostřednictvím distributora
                              Vaše cena::
                              3632140 NASR062D NASR062D W   2 9.5250 .3750 9.5250 .3750 9.5250 .3750 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380 1.7780 .0700 22.2250 .8750 N.2R
                                Tato položka není k dispozici
                                Tato položka může být k dispozici prostřednictvím distributora
                                Vaše cena::
                                3636529 NASR082D NASR082D W   2 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2R
                                  Ceníková cena:
                                  $100.23 /každý
                                  Vaše cena::
                                  3639039 NASR102B NASR102B W   2 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2R
                                    Ceníková cena:
                                    $101.77 /každý
                                    Vaše cena::
                                    3636532 NASR103B NASR103B W   3 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 31.750 1.250     5.3340 .2100         N.3R
                                      Ceníková cena:
                                      $101.77 /každý
                                      Vaše cena::
                                      Ceníková cena:
                                      Sleva: %
                                      Vaše cena::
                                      Výměna Tato položka není k dispozici
                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                      PŮVODNÍ PRODUKT

                                      NAS NAS

                                      Toolholders
                                      (22 Products)
                                      • GroovingGrooving
                                      • Face GroovingFace Grooving
                                      Informace o produktech
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert
                                      3632151 NSL164C NSL164C W   25.4000 1.000 25.4000 1.000 31.7500