Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

WMT™ Groove, Cut-Off, and Turning

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (449)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (449)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (449)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (449)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (449)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (449)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (449)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (449)
  • M Stainless Steel (433)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (433)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (433)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (433)
  • K Cast Iron (449)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (449)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (449)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (449)
  • N Non-Ferrous Materials (433)
    • N1
      Wrought Aluminum
      (433)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (433)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (433)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (433)
    • N6
      Carbon, Graphite Composites, CFRP
      (433)
  • S High-Temp Alloys (433)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (433)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (433)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (433)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (433)
  • H Hardened Materials (286)
    • H1
      Hardened Materials 44-48 HRC
      (286)
    • H2
      Hardened Materials 48-55 HRC
      (286)
Select All Star
  • CN (95)
  • DE (203)
  • GB (1)
  • IN (73)
  • SG (11)
  • US (114)
Applications
Applications
  • Cut-Off Cut-Off (165)
  • Deep Grooving Deep Grooving (14)
  • Face Grooving Face Grooving (229)
  • Grooving Grooving (362)
  • ID Grooving ID Grooving (223)
  • Profiling Profiling (33)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (364)
  • Lightly Interrupted Cut (364)
  • Smooth Cut (302)
  • Varying Depth of Cut (302)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (244)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (30)
  • Toolholder (177)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (424)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (73)
  • 0.005 in (23)
  • 0.006 in (62)
  • 0.007 in (108)
  • 0.009 in (57)
  • 0.01 in (144)
  • 0.012 in (213)
  • 0.015 in (19)
  • 0.0223 in (32)
  • 0.023 in (34)
  • 0.024 in (208)
  • 0.03 in (179)
  • 0.059 in (18)
  • 0.0591 in (58)
  • 0.06 in (58)
  • 0.0787 in (34)
  • 0.0797 in (34)
  • 0.094 in (37)
  • 0.0984 in (37)
  • 0.0994 in (38)
  • 0.1181 in (32)
  • 0.1191 in (33)
  • 0.125 in (32)
  • 0.156 in (14)
  • 0.1575 in (14)
  • 0.1585 in (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (1)
  • 0.08 mm (72)
  • 0.13 mm (23)
  • 0.15 mm (62)
  • 0.17 mm (108)
  • 0.23 mm (57)
  • 0.25 mm (142)
  • 0.26 mm (37)
  • 0.3 mm (199)
  • 0.31 mm (100)
  • 0.38 mm (19)
  • 0.58 mm (32)
  • 0.59 mm (34)
  • 0.6 mm (187)
  • 0.61 mm (154)
  • 0.75 mm (173)
  • 0.76 mm (126)
  • 1.5 mm (76)
  • 1.525 mm (58)
  • 2.0 mm (34)
  • 2.025 mm (34)
  • 2.388 mm (37)
  • 2.5 mm (37)
  • 2.525 mm (38)
  • 3.0 mm (32)
  • 3.025 mm (33)
  • 3.175 mm (32)
  • 3.962 mm (14)
  • 4.0 mm (14)
  • 4.025 mm (15)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (259)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (259)
Corner Chamfer Min to Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (126)
  • Lightly Interrupted Cut (126)
  • Smooth Cut (85)
  • Varying Depth of Cut (85)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN6026 (1)
  • WP10CT (216)
  • WP25CT (211)
  • WU10HT (132)
  • WU10PT (286)
  • WU25PT (353)
Hand Of Tool
Hand Of Tool
  • L (95)
  • R (112)
Wiper Insert
Wiper Insert
  • N (407)
  • Y (155)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 30.0 mm (1)
  • 32.0 mm (1)
  • 38.0 mm (6)
  • 40.39 mm (4)
  • 41.0 mm (4)
  • 46.99 mm (7)
  • 47.0 mm (8)
  • 52.0 mm (10)
  • 54.0 mm (4)
  • 54.1 mm (3)
  • 69.85 mm (2)
  • 70.0 mm (13)
  • 100.0 mm (17)
  • 101.6 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.181 in (1)
  • 1.2598 in (1)
  • 1.496 in (4)
  • 1.4961 in (2)
  • 1.59 in (4)
  • 1.614 in (4)
  • 1.85 in (15)
  • 2.047 in (6)
  • 2.0472 in (4)
  • 2.126 in (4)
  • 2.13 in (3)
  • 2.75 in (2)
  • 2.7559 in (8)
  • 2.756 in (5)
  • 3.937 in (17)
  • 4.0 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.7874 in (15)
  • 1.0236 in (15)
  • 1.024 in (2)
  • 1.062 in (2)
  • 1.125 in (2)
  • 1.25 in (2)
  • 1.26 in (3)
  • 2.047 in (5)
  • 2.0472 in (3)
  • 2.7559 in (4)
  • 2.756 in (6)
  • 3.937 in (13)
  • 4.0 in (2)
  • 8.0 in (2)
  • 8.0709 in (9)
  • 8.071 in (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (15)
  • 25.999 mm (7)
  • 26.0 mm (10)
  • 26.975 mm (2)
  • 28.575 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (3)
  • 52.0 mm (8)
  • 70.0 mm (10)
  • 100.0 mm (13)
  • 101.6 mm (2)
  • 203.2 mm (2)
  • 205.0 mm (17)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (177)
  • S (30)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.97 in (8)
  • 2.52 in (13)
  • 2.54 in (2)
  • 3.15 in (3)
  • 3.31 in (2)
  • 3.32 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (8)
  • 64.0 mm (13)
  • 64.4 mm (2)
  • 80.0 mm (3)
  • 84.0 mm (2)
  • 84.4 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (30)
frontEnd
Clamp Style
Clamp Style
  • C (3)
  • S (4)
  • Y (222)
Cutting Width
Cutting Width
  • 0.059 in (26)
  • 0.0787 in (1)
  • 0.079 in (48)
  • 0.084 in (41)
  • 0.094 in (27)
  • 0.118 in (79)
  • 0.123 in (70)
  • 0.125 in (69)
  • 0.156 in (35)
  • 0.157 in (48)
  • 0.158 in (34)
  • 0.163 in (46)
  • 0.188 in (45)
  • 0.197 in (47)
  • 0.202 in (50)
  • 0.236 in (40)
  • 0.241 in (45)
  • 0.249 in (32)
  • 0.25 in (38)
  • 0.312 in (18)
  • 0.315 in (19)
  • 0.32 in (27)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.5 mm (26)
  • 1.99 mm (39)
  • 2.0 mm (47)
  • 2.13 mm (41)
  • 2.38 mm (21)
  • 2.39 mm (23)
  • 3.0 mm (79)
  • 3.13 mm (70)
  • 3.17 mm (63)
  • 3.18 mm (61)
  • 3.95 mm (33)
  • 3.96 mm (33)
  • 4.0 mm (51)
  • 4.13 mm (46)
  • 4.76 mm (37)
  • 4.77 mm (41)
  • 4.78 mm (37)
  • 5.0 mm (47)
  • 5.13 mm (50)
  • 6.0 mm (40)
  • 6.12 mm (33)
  • 6.13 mm (42)
  • 6.32 mm (32)
  • 6.34 mm (32)
  • 6.35 mm (34)
  • 6.36 mm (32)
  • 7.92 mm (16)
  • 7.94 mm (14)
  • 8.0 mm (19)
  • 8.13 mm (27)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • PRISMATIC (466)
Insert Size
Insert Size
  • 1 (18)
  • 2 (32)
  • 2B (18)
  • 3 (45)
  • 4 (27)
  • 5 (29)
  • 6 (23)
  • 8 (12)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.3937 in (15)
  • 0.42 in (3)
  • 0.433 in (9)
  • 0.4331 in (2)
  • 0.44 in (8)
  • 0.4921 in (1)
  • 0.5 in (3)
  • 0.5118 in (17)
  • 0.512 in (4)
  • 0.531 in (2)
  • 0.551 in (12)
  • 0.5512 in (1)
  • 0.56 in (9)
  • 0.5625 in (2)
  • 0.6102 in (2)
  • 0.625 in (13)
  • 0.6252 in (1)
  • 0.6299 in (4)
  • 0.63 in (11)
  • 0.65 in (18)
  • 0.7283 in (2)
  • 0.748 in (24)
  • 0.75 in (18)
  • 0.866 in (27)
  • 0.875 in (8)
  • 0.944 in (5)
  • 0.984 in (9)
  • 0.9843 in (3)
  • 1.0 in (11)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 10.0 mm (15)
  • 10.668 mm (2)
  • 10.67 mm (1)
  • 11.0 mm (11)
  • 11.176 mm (4)
  • 11.18 mm (4)
  • 12.5 mm (1)
  • 12.7 mm (3)
  • 12.9995 mm (7)
  • 13.0 mm (14)
  • 13.4875 mm (2)
  • 14.0 mm (13)
  • 14.22 mm (3)
  • 14.224 mm (6)
  • 14.2875 mm (2)
  • 15.5 mm (2)
  • 15.875 mm (3)
  • 15.88 mm (10)
  • 15.883 mm (1)
  • 16.0 mm (15)
  • 16.5 mm (10)
  • 16.51 mm (8)
  • 18.5 mm (2)
  • 19.0 mm (24)
  • 19.05 mm (17)
  • 19.06 mm (1)
  • 22.0 mm (27)
  • 22.22 mm (4)
  • 22.225 mm (4)
  • 23.97 mm (5)
  • 25.0 mm (12)
  • 25.4 mm (11)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 4.2520 in (1)
  • 4.3000 in (2)
  • 4.9610 in (3)
  • 5.0500 in (4)
  • 5.4820 in (2)
  • 5.5280 in (4)
Gage Length
Gage Length
  • 108.0000 mm (1)
  • 109.2200 mm (2)
  • 126.0000 mm (3)
  • 128.2700 mm (4)
  • 139.2500 mm (2)
  • 140.4100 mm (4)
insertGeometry
Shape
Shape
  • PRISMATIC (222)
Insert Seat Size
Insert Seat Size
  • 1 (5)
  • 2 (15)
  • 2B (10)
  • 3 (53)
  • 4 (39)
  • 5 (37)
  • 6 (35)
  • 8 (28)
Cutting Tool Material
Cutting Tool Material
  • H W (459)
backEnd
Connection Type
Connection Type
  • BORING BAR (30)
  • SQUARE SHANK (172)
Back-End Diameter
Back-End Diameter
  • 25.0 mm (4)
  • 25.4 mm (4)
  • 31.7 mm (1)
  • 31.75 mm (6)
  • 32.0 mm (8)
  • 38.1 mm (3)
  • 40.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.98 in (4)
  • 1.0 in (4)
  • 1.25 in (7)
  • 1.26 in (8)
  • 1.5 in (3)
  • 1.57 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Grooving and Cut-Off • WMT™

Integral Toolholders for Swiss-Style Machines • Inch
(14 Products)
  • TurningTurning
  • Cut-OffCut-Off
  • ProfilingProfiling
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [F] F Dimension [F] F Dimension [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
3656186 WMTCL061039 WMTCL061039 1 1.4990 .0590 9.5250 .3750 9.5250 .3750 20.0000 .7874 9.5250 .3750 15.8750 .6250 114.3000 4.500 21.3870 .8420  
    List price:
    $154.69 /each.
    Your price::
    3656101 WMTCL081039 WMTCL081039 1 1.5010 .0591 12.7000 .5000 12.7000 .5000 20.0000 .7874 12.7000 .5000 19.0500 .7500 114.3000 4.500 21.3870 .8420  
      List price:
      $121.68 /each.
      Your price::
      3656146 WMTCL122051 WMTCL122051 2 2.0070 .0790 19.0500 .7500 19.0500 .7500 25.9990 1.023 19.0500 .7500 26.6700 1.050 127.0000 5.000 24.2060 .9530  
        List price:
        $164.93 /each.
        Your price::
        3655949 WMTCR081039 WMTCR081039   1 1.4990 .0590 12.7000 .5000 12.7000 .5000 20.0000 .7874 12.7000 .5000 19.0500 .7500 114.3000 4.500 21.3870 .8420
          List price:
          $145.59 /each.
          Your price::
          3656133 WMTCR101051 WMTCR101051 1 1.5010 .0591 15.8750 .6250 15.8750 .6250 25.9990 1.023 15.9000 .6260 23.4950 .9250 127.0000 5.000 24.1810 .9520  
            List price:
            $121.68 /each.
            Your price::
            3656135 WMTCR121051 WMTCR121051 1 1.4990 .0590 19.0500 .7500 19.0500 .7500 25.9990 1.023 19.0500 .7500 26.6700 1.050 127.0000 5.000 24.1810 .9520  
              List price:
              $117.55 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              WMT™ zapichování, upichování a soustružení

              Integrální držáky nástrojů pro dlouhotočné automaty
              (18 Products)
              • TurningTurning
              • Cut-OffCut-Off
              • ProfilingProfiling
              • GroovingGrooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
              3653414 WMTCL1010H210 WMTCL1010H210 2 2.0000 .0787 10.0000 .3937 10.0000 .3937 10.0000 .3937 20.0000 .7874 16.3500 .6437 100.0000 3.937 21.4100 .8429  
                List price:
                $121.68 /each.
                Your price::
                3653416 WMTCL1212H210 WMTCL1212H210 2 2.0000 .0787 12.0000 .4724 12.0000 .4724 12.0000 .4724 20.0000 .7874 18.3500 .7224 100.0000 3.937 21.4100 .8429  
                  List price:
                  $121.68 /each.
                  Your price::
                  3653418 WMTCL1616K213 WMTCL1616K213 2 2.0000 .0787 16.0000 .6299 15.8400 .6236 16.0000 .6299 26.0000 1.023 23.6200 .9299 125.0000 4.921 24.2100 .9531  
                    List price:
                    $121.68 /each.
                    Your price::
                    3653413 WMTCR1010H210 WMTCR1010H210   2 2.0000 .0787 10.0000 .3937 10.0000 .3937 10.0000 .3937 20.0000 .7874 16.3500 .6437 100.0000 3.937 21.4100 .8429
                      List price:
                      $121.68 /each.
                      Your price::
                      3653415 WMTCR1212H210 WMTCR1212H210 2 2.0000 .0787 12.0000 .4724 12.0000 .4724 12.0000 .4724 20.0000 .7874 18.3500 .7224 100.0000 3.937 21.4100 .8429  
                        List price:
                        $121.68 /each.
                        Your price::
                        3653417 WMTCR1616K213 WMTCR1616K213 2 2.0000 .0787 16.0000 .6299 15.8400 .6236 16.0000 .6299 26.0000 1.023 23.6200 .9299 125.0000 4.921 24.2100 .9531  
                          List price:
                          $121.68 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Grooving and Cut-Off • WMT™

                          Hluboké drážkování A3 – vyvrtávací tyče
                          (14 Products)
                          • I.D. GroovingI.D. Grooving
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size
                          5423848 A16RWMTEL0416N A16RWMTEL0416N 4 3.9600 .1560 16.0000 .6300 40.3900 1.590 25.4 1.0 203.2000 8.000 26.0100 1.024 6.4000 .2500 1/4-18 NPT  
                            List price:
                            $217.47 /each.
                            Your price::
                            5423847 A20SWMTEL0319N A20SWMTEL0319N 3 3.1800 .1250 19.0000 .7480 46.9900 1.850 31.75 1.25 254.0000 10.000 29.0100 1.142 6.4000 .2500 1/4-18 NPT  
                              List price:
                              $262.05 /each.
                              Your price::
                              5423870 A20SWMTEL0519N A20SWMTEL0519N 5 4.7800 .1880 19.0000 .7480 46.9900 1.850 31.75 1.25 254.0000 10.000 29.0100 1.142 6.4000 .2500 1/4-18 NPT  
                                List price:
                                $278.79 /each.
                                Your price::
                                5423872 A20SWMTEL0619N A20SWMTEL0619N 6 6.3500 .2500 19.0000 .7480 46.9900 1.850 31.7 1.25 254.0000 10.000 29.0100 1.142 6.4000 .2500 1/4-18 NPT  
                                  List price:
                                  $278.79 /each.
                                  Your price::
                                  5423449 A20SWMTER0319N A20SWMTER0319N   3 3.1800 .1250 19.0000 .7480 46.9900 1.850 31.75 1.25 254.0000 10.000 29.0100 1.142 6.4000 .2500 1/4-18 NPT
                                    List price:
                                    $262.05 /each.
                                    Your price::
                                    5423873 A24TWMTEL0622N A24TWMTEL0622N 6 6.3500 .2500 22.0000 .8660 54.1000 2.130 38.1 1.5 304.8000 12.000 32.0000 1.260 6.4000 .2500 1/4-18 NPT  
                                      List price:
                                      $312.26 /each.
                                      Your price::
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      ORIGINAL PRODUCT

                                      Grooving and Cut-Off • WMT™

                                      Integral Toolholders • Inch
                                      (57 Products)
                                      • TurningTurning
                                      • Cut-OffCut-Off
                                      • ProfilingProfiling
                                      • GroovingGrooving
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [F] F Dimension [F] F Dimension [H3]Head Bottom Offset [H3]Head Bottom Offset [L1] Tool Length [L1] Tool Length [LS] Shank Length [LS] Shank Length
                                      3655893 WMTCL82B062 WMTCL82B062 2B 2.3800 .0940 12.7000 .5000 12.7000 .5000     31.7500 1.250 12.7000 .5000 4.8300 .1900 114.3000 4.500 84.1 3.31  
                                        List price:
                                        $142.19 /each.
                                        Your price::
                                        3655892 WMTCR82B062 WMTCR82B062   2B 2.3800 .0940 12.7000 .5000 12.7000 .5000     31.7500 1.250 12.7000 .5000 4.8300 .1900 114.3000 4.500 84.1 3.31
                                          List price:
                                          $121.68 /each.
                                          Your price::
                                          3655895 WMTSL102B075 WMTSL102B075 2B 2.3800 .0940 15.8800 .6250 15.8800 .6250 19.0500 .7500     15.8700 .6250 6.3500 .2500 127.0000 5.000 88.9 3.5  
                                            List price:
                                            $121.68 /each.
                                            Your price::
                                            3655897 WMTSL122B075 WMTSL122B075 2B 2.3800 .0940 19.0500 .7500 19.0500 .7500 19.0500 .7500     19.0500 .7500 6.3500 .2500 127.0000 5.000 88.9 3.5  
                                              List price:
                                              $121.68 /each.
                                              Your price::
                                              3655900 WMTSR103087 WMTSR103087 3 3.1800 .1250 15.8800 .6250 15.8800 .6250 22.2200 .8750     15.8600 .6240 6.3500 .2500 127.0000 5.000 85.72 3.375  
                                                List price:
                                                $142.19 /each.
                                                Your price::
                                                3655896 WMTSR122B075 WMTSR122B075 2B 2.3840 .0939 19.0500 .7500 19.0500 .7500 19.0500 .7500     19.0480 .7499 6.3500 .2500 127.0000 5.000 88.9 3.5  
                                                  List price:
                                                  $121.68 /each.
                                                  Your price::
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor

                                                  ORIGINAL PRODUCT

                                                  Soustružení, zapichování a upichování WMT™

                                                  Modulární držáky nástrojů WMT
                                                  (13 Products)
                                                  • TurningTurning
                                                  • Cut-OffCut-Off
                                                  • ProfilingProfiling
                                                  • GroovingGrooving
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [W] Groove Width [W] Groove Width