Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

D-Style Clamping • For Negative Style Inserts

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (147)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (147)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (147)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (147)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (147)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (147)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (147)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (147)
  • M Stainless Steel (141)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (141)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (141)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (141)
  • K Cast Iron (147)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (147)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (147)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (147)
  • N Non-Ferrous Materials (138)
    • N1
      Wrought Aluminum
      (138)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (66)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (138)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (66)
    • N6
      Carbon, Graphite Composites, CFRP
      (66)
    • N7
      MMC's
      (66)
  • S High-Temp Alloys (141)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (141)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (141)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (141)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (138)
  • H Hardened Materials (119)
    • H1
      Hardened Materials 44-48 HRC
      (119)
    • H2
      Hardened Materials 48-55 HRC
      (119)
    • H3
      Hardened Materials 56-60 HRC
      (119)
    • H4
      Hardened Materials >60 HRC
      (119)
Select All Star
  • DE (23)
  • IN (6)
  • SG (3)
  • US (8)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (115)
  • Multiple Direction Cutting Multiple Direction Cutting (127)
  • Profiling Profiling (112)
  • Turning Turning (144)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (147)
  • Lightly Interrupted Cut (147)
  • Smooth Cut (147)
  • Varying Depth of Cut (147)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (14)
  • 62.5 (1)
  • 63.0 (4)
  • 72.5 (4)
  • 75.0 (20)
  • 90.0 (9)
  • 93.0 (37)
  • 95.0 (50)
  • 107.5 (3)
  • 117.5 (5)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (78)
  • 2.0 (82)
  • 3.0 (15)
  • 4.0 (123)
  • 6.0 (21)
  • 8.0 (69)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (53)
  • 0.008 in (64)
  • 0.014 in (12)
  • 0.016 in (112)
  • 0.024 in (9)
  • 0.031 in (140)
  • 0.047 in (140)
  • 0.063 in (102)
  • 0.094 in (1)
  • 0.095 in (30)
  • 0.25 in (3)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (53)
  • 0.2 mm (64)
  • 0.351 mm (12)
  • 0.4 mm (112)
  • 0.601 mm (9)
  • 0.8 mm (140)
  • 1.201 mm (140)
  • 1.6 mm (102)
  • 2.375 mm (1)
  • 2.401 mm (30)
  • 6.351 mm (3)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (110)
  • CW5025 (115)
  • HK1500 (79)
  • PB100 (24)
  • PB170 (24)
  • PB250 (24)
  • PB300 (24)
  • SP0A00 (13)
  • SPN4W2 (4)
  • THM (54)
  • THM-X (49)
  • THMF-X (41)
  • TN10P (130)
  • TN10U (97)
  • TN15M (127)
  • TN15U (97)
  • TN2000 (83)
  • TN20K (130)
  • TN20P (141)
  • TN30M (134)
  • TN30P (103)
  • TN4000 (83)
  • TN5015 (103)
  • TN5020 (97)
  • TN5105 (79)
  • TN5120 (105)
  • TN6010 (65)
  • TN6025 (62)
  • TN7005 (62)
  • TN7010 (109)
  • TN7015 (111)
  • TN7025 (111)
  • TN7035 (92)
  • TN7105 (62)
  • TN7110 (101)
  • TN7115 (107)
  • TN7125 (101)
  • TN7135 (92)
  • TN8025 (113)
  • TTI15 (43)
  • TTM (2)
  • TTM09 (23)
  • TTR (39)
  • TTR-X (4)
  • TTS (66)
  • TTX (42)
  • W00342 (4)
  • WBH10C (87)
  • WBH10P (53)
  • WBH10U (79)
  • WBH20P (91)
  • WBH25P (70)
  • WBH25U (61)
  • WBH30P (53)
  • WBK40U (44)
  • WBK45U (48)
  • WDN00U (32)
  • WDN25U (66)
  • WK05CT (137)
  • WK15CT (70)
  • WK20CT (137)
  • WM15CT (134)
  • WM25CT (135)
  • WM35CT (134)
  • WP05CT (33)
  • WP15CT (145)
  • WP20TT (7)
  • WP25CT (145)
  • WP35CT (145)
  • WS10PT (136)
  • WS25PT (138)
  • WU10HT (134)
  • WU10PT (96)
  • WU25PT (96)
Hand Of Tool
Hand Of Tool
  • L (60)
  • N (13)
  • R (74)
Wiper Insert
Wiper Insert
  • N (147)
  • Y (48)
F Dimension
F Dimension
  • 9.5 mm (1)
  • 9.525 mm (1)
  • 10.0 mm (3)
  • 12.0 mm (4)
  • 12.601 mm (1)
  • 12.625 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (3)
  • 15.5 mm (1)
  • 15.875 mm (1)
  • 19.5 mm (1)
  • 23.151 mm (2)
  • 25.0 mm (16)
  • 25.401 mm (8)
  • 27.0 mm (4)
  • 28.651 mm (1)
  • 31.75 mm (29)
  • 32.0 mm (32)
  • 33.551 mm (1)
  • 35.0 mm (3)
  • 38.1 mm (12)
  • 40.0 mm (12)
  • 47.026 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (5)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.374 in (1)
  • 0.375 in (1)
  • 0.394 in (3)
  • 0.473 in (4)
  • 0.496 in (1)
  • 0.497 in (1)
  • 0.5 in (1)
  • 0.512 in (3)
  • 0.61 in (1)
  • 0.625 in (1)
  • 0.768 in (1)
  • 0.911 in (2)
  • 0.984 in (16)
  • 1.0 in (8)
  • 1.063 in (4)
  • 1.129 in (1)
  • 1.25 in (29)
  • 1.26 in (32)
  • 1.321 in (1)
  • 1.379 in (3)
  • 1.5 in (12)
  • 1.575 in (12)
  • 1.851 in (1)
  • 1.969 in (3)
  • 2.0 in (5)
F Dimension Min komu F Dimension Max
Cutting Direction
Cutting Direction
  • B (50)
  • E (16)
  • S (81)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (126)
  • NEGATIVE-ZERO (21)
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (49)
  • D-DIAMOND/RHOMBIC 55 (29)
  • R-ROUND (3)
  • S-SQUARE 90 (20)
  • T-TRIANGLE 60 (6)
  • V-DIAMOND/RHOMBIC 35 (25)
  • W-TRIGON 80 (15)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (98)
  • B L (91)
  • C A (110)
  • C N (127)
  • D P (66)
  • H T (43)
  • H W (147)
backEnd
Shank Height
Shank Height
  • 0.75 in (9)
  • 0.787 in (21)
  • 0.984 in (31)
  • 0.985 in (1)
  • 1.0 in (31)
  • 1.25 in (19)
  • 1.26 in (25)
  • 1.5 in (6)
  • 1.575 in (4)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 19.05 mm (9)
  • 20.0 mm (21)
  • 25.0 mm (31)
  • 25.026 mm (1)
  • 25.401 mm (31)
  • 31.75 mm (19)
  • 32.0 mm (25)
  • 38.1 mm (6)
  • 40.0 mm (4)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.75 in (9)
  • 0.787 in (21)
  • 0.984 in (42)
  • 1.0 in (35)
  • 1.25 in (15)
  • 1.26 in (15)
  • 1.5 in (6)
  • 1.575 in (4)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 19.05 mm (9)
  • 20.0 mm (21)
  • 25.0 mm (42)
  • 25.401 mm (35)
  • 31.75 mm (15)
  • 32.0 mm (15)
  • 38.1 mm (6)
  • 40.0 mm (4)
Shank Width Min komu Shank Width Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

DCLN 5° DCLN 5°

(21 Products)
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
5564312 DCLNL205DKC4 DCLNL205DKC4 WG   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.0500 1.380 CN..543
    Ceníková cena:
    $100.56 /každý
    Vaše cena::
    5564331 DCLNL3225P12KC04 DCLNL3225P12KC04 WG   32.0000 1.260 25.0000 .9840 32.0000 1.260 170.0000 6.693 32.0000 1.260 CN..120408
      Ceníková cena:
      $100.45 /každý
      Vaše cena::
      5564319 DCLNR124BKC3 DCLNR124BKC3 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.7500 1.250 CN..432
        Ceníková cena:
        $81.68 /každý
        Vaše cena::
        5564321 DCLNR164DKC3 DCLNR164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 CN..432
          Ceníková cena:
          $83.81 /každý
          Vaše cena::
          5564324 DCLNR204DKC3 DCLNR204DKC3 WG   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250 CN..432
            Ceníková cena:
            $100.56 /každý
            Vaše cena::
            5564333 DCLNR3225P12KC04 DCLNR3225P12KC04 WG   32.0000 1.260 25.0000 .9840 32.0000 1.260 170.0000 6.693 32.0000 1.260 CN..120408
              Ceníková cena:
              $101.49 /každý
              Vaše cena::
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

              PŮVODNÍ PRODUKT

              DVJN 3° DVJN 3°

              (10 Products)
              • TurningTurning
              • ProfilingProfiling
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
              5564344 DVJNL163DKC3 DVJNL163DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 46.2300 1.820 VN..332
                Ceníková cena:
                $116.71 /každý
                Vaše cena::
                5564345 DVJNL164DKC3 DVJNL164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 54.6100 2.150 VN..432
                  Ceníková cena:
                  $116.88 /každý
                  Vaše cena::
                  5697781 DVJNR123CKC3 DVJNR123CKC3 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 127.0000 5.000 46.2300 1.820 VN..332
                    Ceníková cena:
                    $112.90 /každý
                    Vaše cena::
                    5564346 DVJNR163DKC3 DVJNR163DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 46.2300 1.820 VN..332
                      Ceníková cena:
                      $116.71 /každý
                      Vaše cena::
                      5564347 DVJNR164DKC3 DVJNR164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 54.6100 2.150 VN..432
                        Ceníková cena:
                        $116.88 /každý
                        Vaše cena::
                        5697783 DVJNR854DKC3 DVJNR854DKC3 WG   31.7500 1.250 25.4000 1.000 31.7500 1.250 152.4000 6.000 54.6100 2.150 VN..432
                          Ceníková cena:
                          $116.53 /každý
                          Vaše cena::
                          Ceníková cena:
                          Sleva: %
                          Vaše cena::
                          Výměna Tato položka není k dispozici
                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                          PŮVODNÍ PRODUKT

                          DDJN -3° DDJN -3°

                          (9 Products)
                          • TurningTurning
                          • ProfilingProfiling
                          Informace o produktech
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
                          5696538 DDJNL164DKC3 DDJNL164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 DN..432
                            Ceníková cena:
                            $124.49 /každý
                            Vaše cena::
                            5696541 DDJNL204DKC3 DDJNL204DKC3 WG   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250 DN..432
                              Ceníková cena:
                              $132.00 /každý
                              Vaše cena::
                              5696545 DDJNR163DKC3 DDJNR163DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 DN..332
                                Ceníková cena:
                                $122.31 /každý
                                Vaše cena::
                                5696546 DDJNR164DKC3 DDJNR164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 DN..432
                                  Ceníková cena:
                                  $124.49 /každý
                                  Vaše cena::
                                  5696549 DDJNR204DKC3 DDJNR204DKC3 WG   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250 DN..432
                                    Ceníková cena:
                                    $132.00 /každý
                                    Vaše cena::
                                    5696551 DDJNR245DKC4 DDJNR245DKC4 WG   38.1000 1.500 38.1000 1.500 50.8000 2.000 152.4000 6.000 35.0500 1.380 DN..543
                                      Ceníková cena:
                                      $158.04 /každý
                                      Vaše cena::
                                      Ceníková cena:
                                      Sleva: %
                                      Vaše cena::
                                      Výměna Tato položka není k dispozici
                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                      PŮVODNÍ PRODUKT

                                      DWLN -5° DWLN -5°

                                      (5 Products)
                                      • TurningTurning
                                      • ProfilingProfiling
                                      • FacingFacing
                                      Informace o produktech
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B3] Head Back Offset [B3] Head Back Offset Gage Insert
                                      5697787 DWLNL164DKC3 DWLNL164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 3.8000 .1500 WN..432
                                        Ceníková cena:
                                        $83.81 /každý
                                        Vaše cena::
                                        5697789 DWLNR123BKC3 DWLNR123BKC3 WG   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 25.4000 1.000 7.1000 .2800 WN..332
                                          Ceníková cena:
                                          $79.25 /každý
                                          Vaše cena::
                                          5697790 DWLNR163DKC3 DWLNR163DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 1.5200 .0600 WN..332
                                            Ceníková cena:
                                            $84.64 /každý
                                            Vaše cena::
                                            5697791 DWLNR164CKC3 DWLNR164CKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 25.4000 1.000 3.8000 .1500 WN..432
                                              Ceníková cena:
                                              $87.18 /každý
                                              Vaše cena::
                                              5697792 DWLNR164DKC3 DWLNR164DKC3 WG   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 3.8000 .1500 WN..432
                                                Ceníková cena:
                                                $83.81 /každý
                                                Vaše cena::
                                                Ceníková cena:
                                                Sleva: %
                                                Vaše cena::
                                                Výměna Tato položka není k dispozici
                                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                PŮVODNÍ PRODUKT

                                                DSRN 75° DSRN 75°

                                                DSRN 75°
                                                (4 Products)
                                                • TurningTurning
                                                • FacingFacing
                                                Informace o produktech
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert
                                                5696700 DSRNL2525M12KC04 DSRNL2525M12KC04 WG   25.0000 .9840 25.0000 .9840 27.0000 1.063 150.0000 5.906 32.0000 1.260 3.3000 .1300 SN..120408
                                                  Ceníková cena:
                                                  $92.08 /každý
                                                  Vaše cena::
                                                  5696701 DSRNL3232P15KC06 DSRNL3232P15KC06 WG   32.0000 1.260 32.0000 1.260 35.0000 1.378 170.0000 6.693 38.0000 1.500 4.0100 .1580 SN..150612
                                                    Ceníková cena:
                                                    $106.09 /každý
                                                    Vaše cena::
                                                    5696704 DSRNR2525M12KC04 DSRNR2525M12KC04 WG   25.0000 .9840 25.0000 .9840 27.0000 1.063 150.0000 5.906 32.0000 1.260 3.3000 .1300 SN..120408
                                                      Ceníková cena:
                                                      $91.87 /každý
                                                      Vaše cena::
                                                      5696706 DSRNR3232P19KC06 DSRNR3232P19KC06 WG   32.0000 1.260 32.0000 1.260 35.0000 1.378 170.0000 6.693 42.0000 1.650 4.8300 .1900 SN..190612
                                                        Ceníková cena:
                                                        $108.56 /každý
                                                        Vaše cena::
                                                        Ceníková cena:
                                                        Sleva: %
                                                        Vaše cena::
                                                        Výměna Tato položka není k dispozici
                                                        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                        PŮVODNÍ PRODUKT

                                                        DSKN 75° DSKN 75°

                                                        DSKN 75°
                                                        (2 Products)
                                                        • TurningTurning
                                                        • FacingFacing
                                                        Informace o produktech
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [L1A] L1 A Dimension [L1A] L1 A Dimension [B3] Head Back Offset [B3] Head Back Offset Gage Insert
                                                        5696686 DSKNR2525M12KC04 DSKNR2525M12KC04 WG   25.0000 .9840 25.0000 .9840 32.0000 1.260 150.0000 5.906 32.0000 1.260 3.0500 .1200 4.0000 .1600 SN..120408
                                                          Ceníková cena:
                                                          $91.69 /každý
                                                          Vaše cena::
                                                          5696688 DSKNR3232P15KC06 DSKNR3232P15KC06 WG   32.0000 1.260 32.0000 1.260 40.0000 1.575 170.0000 6.693 32.0000 1.260 3.7600 .1480     SN..150612
                                                            Ceníková cena:
                                                            $106.79 /každý
                                                            Vaše cena::
                                                            Ceníková cena:
                                                            Sleva: %
                                                            Vaše cena::
                                                            Výměna Tato položka není k dispozici
                                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                            PŮVODNÍ PRODUKT

                                                            DVJN 93° DVJN 93°

                                                            DVJN 93°
                                                            (6 Products)
                                                            • TurningTurning
                                                            • ProfilingProfiling
                                                            Informace o produktech
                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert
                                                            5696732 DVJNL2020K16KC04 DVJNL2020K16KC04