Inserts
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (45)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(45)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(45)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(45)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(45)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(45)
-
-
M Stainless Steel (45)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(45)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(45)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(45)
-
-
K Cast Iron (45)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(45)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(45)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(45)
-
-
N Non-Ferrous Materials (45)
-
N1Wrought Aluminum(45)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(45)
-
N3High-Silicon Aluminum Alloys Si >12.2%(22)
-
Applications
-
ID Grooving (4)
-
ID Thread Turning (3)
-
Multiple Direction Cutting (31)
-
TRN Boring (20)
Tool Cutting Edge Angle
-
90.0 (6)
-
92.0 (16)
-
92.5 (6)
-
93.0 (17)
to
application
Minimum Axial Groove Diameter
-
0.062 (5)
-
0.094 (5)
-
0.11 (4)
-
0.125 (6)
-
0.14 (4)
-
0.156 (6)
-
0.175 (4)
-
0.187 (4)
-
0.25 (4)
-
0.312 (3)
to
Minimum Axial Groove Diameter
-
1.575 (5)
-
2.388 (5)
-
2.794 (4)
-
3.175 (6)
-
3.556 (4)
-
3.962 (6)
-
4.445 (4)
-
4.75 (4)
-
6.35 (4)
-
7.925 (3)
to
Maximum Bore Depth
-
4.75 (1)
-
5.41 (2)
-
7.137 (3)
-
7.925 (6)
-
9.525 (8)
-
12.7 (10)
-
15.24 (1)
-
15.875 (2)
-
19.05 (2)
-
20.955 (2)
-
22.225 (2)
-
25.4 (3)
-
31.75 (1)
-
53.975 (2)
to
Maximum Bore Depth
-
0.187 (1)
-
0.213 (2)
-
0.281 (3)
-
0.312 (6)
-
0.375 (8)
-
0.5 (10)
-
0.6 (1)
-
0.625 (2)
-
0.75 (2)
-
0.825 (2)
-
0.875 (2)
-
1.0 (3)
-
1.25 (1)
-
2.125 (2)
to
frontEnd
Maximum Cutting Depth
-
0.432 (1)
-
0.559 (2)
-
0.686 (2)
-
0.711 (1)
-
0.762 (2)
-
0.813 (2)
-
0.889 (2)
-
1.016 (2)
-
1.27 (4)
-
1.575 (1)
-
1.981 (2)
-
2.388 (1)
to
Maximum Cutting Depth
-
0.017 (1)
-
0.022 (2)
-
0.027 (2)
-
0.028 (1)
-
0.03 (2)
-
0.032 (2)
-
0.035 (2)
-
0.04 (2)
-
0.05 (4)
-
0.062 (1)
-
0.078 (2)
-
0.094 (1)
to
backEnd
Back-End Diameter
-
0.156 (34)
-
0.3123 (11)
to
Back-End Diameter
-
3.962 (34)
-
7.932 (11)
to
other
Grade
-
CG5 (23)
-
CM1 (22)
Platform
-
A/B Series (29)
Tool Unit
-
I (45)
No filters matching ""
View Products in
Metric
Inch
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2836632 | ABD06187R | ABD06187R | CM1 | 1.5750 | .0620 | 5.4100 | .2130 | 21.9200 | .8630 |
|
2836639 | ABD06187R | ABD06187R | CG5 | 1.5750 | .0620 | 5.4100 | .2130 | 21.9200 | .8630 |
|
2836621 | ABD06312R | ABD06312R | CM1 | 1.5750 | .0620 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836627 | ABD06312R | ABD06312R | CG5 | 1.5750 | .0620 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836608 | ABD09281R | ABD09281R | CM1 | 2.3880 | .0940 | 7.1370 | .2810 | 23.6470 | .9310 |
|
2836614 | ABD09281R | ABD09281R | CG5 | 2.3880 | .0940 | 7.1370 | .2810 | 23.6470 | .9310 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2836550 | AGD09503 | AGD09503 | CG5 | 2.7940 | .1100 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836545 | AGD09503 | AGD09503 | CM1 | 2.7940 | .1100 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836537 | AGD12504 | AGD12504 | CG5 | 3.5560 | .1400 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836531 | AGD12504 | AGD12504 | CM1 | 3.5560 | .1400 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836524 | AGD15605 | AGD15605 | CG5 | 4.4450 | .1750 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
2836517 | AGD15605 | AGD15605 | CM1 | 4.4450 | .1750 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2836511 | APD06187R | APD06187R | CG5 | 1.5750 | .0620 | 4.7500 | .1870 | 21.2600 | .8370 |
|
2836495 | APD09281R | APD09281R | CM1 | 2.3880 | .0940 | 7.1370 | .2810 | 23.6470 | .9310 |
|
2836489 | APD125375R | APD125375R | CG5 | 3.1750 | .1250 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836483 | APD125375R | APD125375R | CM1 | 3.1750 | .1250 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836473 | APD156500R | APD156500R | CM1 | 3.9620 | .1560 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
2836479 | APD156500R | APD156500R | CG5 | 3.9620 | .1560 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2836462 | ATD09560F2 | ATD09560F2 | CM1 | 2.7940 | .1100 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836468 | ATD09560F2 | ATD09560F2 | CG5 | 2.7940 | .1100 | 7.9250 | .3120 | 24.4350 | .9620 |
|
2836450 | ATD12560F2 | ATD12560F2 | CM1 | 3.5560 | .1400 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836458 | ATD12560F2 | ATD12560F2 | CG5 | 3.5560 | .1400 | 9.5250 | .3750 | 26.0350 | 1.025 |
|
2836436 | ATD15660F2 | ATD15660F2 | CM1 | 4.4450 | .1750 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
2836443 | ATD15660F2 | ATD15660F2 | CG5 | 4.4450 | .1750 | 12.7000 | .5000 | 29.2100 | 1.150 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2832758 | BB1871250R | BB1871250R | CG5 | 4.7500 | .1870 | 31.7500 | 1.250 | 58.4200 | 2.300 |
|
2832769 | BB187750R | BB187750R | CG5 | 4.7500 | .1870 | 19.0500 | .7500 | 45.7200 | 1.800 |
|
2832763 | BB187750R | BB187750R | CM1 | 4.7500 | .1870 | 19.0500 | .7500 | 45.7200 | 1.800 |
|
2832747 | BB2501000R | BB2501000R | CG5 | 6.3500 | .2500 | 25.4000 | 1.000 | 52.0700 | 2.050 |
|
2832742 | BB2501000R | BB2501000R | CM1 | 6.3500 | .2500 | 25.4000 | 1.000 | 52.0700 | 2.050 |
|
2832724 | BB3121250R | BB3121250R | CG5 | 7.9250 | .3120 | 53.9750 | 2.125 | 80.6450 | 3.175 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
View Products
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | [L4] Maximum Boring Depth | [L4] Maximum Boring Depth | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
2832702 | BP187600R | BP187600R | CG5 | 4.7500 | .1870 | 15.2400 | .6000 | 41.9100 | 1.650 |
|
2832689 | BP250825R | BP250825R | CG5 | 6.3500 | .2500 | 20.9550 | .8250 | 47.6250 | 1.875 |
|
2832683 | BP250825R | BP250825R | CM1 | 6.3500 | .2500 | 20.9550 | .8250 | 47.6250 | 1.875 |
|
2832672 | BP3121000R | BP3121000R | CM1 | 7.9250 | .3120 | 25.4000 | 1.000 | 52.0700 | 2.050 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty