HNPJ-GD • HN0905
15°/75° • 45°• 30°/60° Wendeschneidplatten • HNPJ-GD
Workpiece Materials
K
P
M
S
H
N
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (7)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(7)
-
-
M Stainless Steel (7)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7)
-
-
K Cast Iron (8)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(8)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(8)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(8)
-
-
N Non-Ferrous Materials (1)
-
N1Wrought Aluminum(1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
-
N3High-Silicon Aluminum Alloys Si >12.2%(1)
-
-
S High-Temp Alloys (5)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
Select First Choice
-
DE (5)
-
IN (3)
-
US (7)
Applications
-
ID Thread Turning (10)
Cutting Edges Per Insert
-
12.0 (10)
to
Corner Radius
-
1.2 (10)
to
Corner Radius
-
0.047 (10)
to
application
Grade Of Cutting Tool
-
TN5515 (1)
-
TN6520 (1)
-
TN6525 (1)
-
TN6540 (1)
-
TN7535 (1)
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (1)
-
WS40PM (1)
Wiper Insert
-
N (10)
frontEnd
Insert Shape
-
H-HEXAGON 120 (10)
insertGeometry
Shape
-
H-HEXAGON 120 (10)
Insert IC Size
-
0.625 (10)
to
Insert IC Size
-
15.88 (10)
to
Cutting Edge Length
-
0.338 (10)
to
Cutting Edge Length
-
8.58 (10)
to
Cutting Tool Material
-
H W (10)
Chip Breaker CBMD
-
GD (10)
Tolerance Class
-
P (10)
other
Grade
-
TN5515 (1)
-
TN6520 (1)
-
TN6525 (1)
-
TN6540 (1)
-
TN7535 (1)
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (1)
-
WS40PM (1)
Platform
-
M1200 Series (8)
Tool Unit
-
I (10)
-
M (10)
Insert Hand
-
N (10)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 10
of 10 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [S] Insert Thickness | [S] Insert Thickness | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3761185 | HNPJ0905ANSNGD | HNPJ535ANSNGD | TN6520 | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 3761187 | HNPJ0905ANSNGD | HNPJ535ANSNGD | TN6540 | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 5427372 | HNPJ0905ANSNGD | HNPJ535ANSNGD | WK15CM | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 5550908 | HNPJ0905ANSNGD | HNPJ535ANSNGD | WP40PM | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 5895374 | HNPJ0905ANSNGD | HNPJ535ANSNGD | WP25PM | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 5895375 | HNPJ0905ANSNGD | HNPJ535ANSNGD | WP35CM | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 6180278 | HNPJ0905ANSNGD | HNPJ535ANSNGD | WS40PM | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 3761188 | HNPJ0905ANSNGD | HNPJ535ANSNGD | TN7535 | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 3761184 | HNPJ0905ANSNGD | HNPJ535ANSNGD | TN5515 | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
|
| 3761186 | HNPJ0905ANSNGD | HNPJ535ANSNGD | TN6525 | 12 | 15.8800 | .6250 | 8.5800 | .3380 | 5.5600 | .2190 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Grades
-
TN5515
TN5515 ist eine beschichtete Hartmetall-Sorte mit einer Mehrlagenbeschichtung aus MT-CVD-TiN-TiCN-Al203. Entwickelt für
ein ausgewogenes Zähigkeits- und Verschleißverhalten. Ideal für die leichte bis mittlere Zerspanung aller Gusseisen-Werkstoffe.
K -
TN6520
TN6520 verfügt über eine PVD-TiAIN Mehrlagenbeschichtung. Entwickelt für die leichte und mittlere Zerspanung für alle
Arten von Gusseisen.
K -
TN6525
Die Hartmetallsorte TN6525 verfügt über eine PVD-TiAlN Mehrlagenbeschichtung. Ideal für leichte und mittlere
Zerspanungsanwendungen in Stahl und hochfestem Kugelgraphit-Gusseisen.
PMK -
TN6540
Die Hartmetallsorte TN6540 verfügt über eine PVD-TiAlN Mehrlagenbeschichtung und ist hervorragend für die mittlere bis
schwere Bearbeitung geeignet. Ideal zur Bearbeitung aller Stahlwerkstoffe und Kugelgraphitguss.
PMKS -
TN7535PMK
-
WK15CMK
-
WP25PMPMKSH
-
WP35CMPMKS
-
WP40PMPMS
-
WS40PMPMNS
Auswahlhilfe für Wendeschneidplatten
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..LD | WP40PM | .S..GD | WP40PM | .S..HD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| P5–P6 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| M1–M2 | .E..LD | WP25PM | .S..GD | WP25PM | .S..HD | WP25PM |
| M3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| K1–K2 | .E..LD | TN6520 | .S..GD | WK15CM | .S..HD | WK15CM |
| K3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| N1–N2 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| N3 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| S1–S2 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP25PM |
| S3 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP40PM |
| S4 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP40PM |
| H1 | – | – | – | – | – | – |
Empfohlene Anfangsvorschübe [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | 0,17 | 0,33 | 0,66 | 0,12 | 0,24 | 0,47 | 0,09 | 0,18 | 0,35 | 0,08 | 0,15 | 0,31 | 0,07 | 0,14 | 0,28 | .F..LDJ |
| .E..LD | 0,17 | 0,49 | 0,99 | 0,12 | 0,35 | 0,71 | 0,09 | 0,27 | 0,53 | 0,08 | 0,23 | 0,46 | 0,07 | 0,21 | 0,42 | .E..LD |
| .S..GD | 0,26 | 0,84 | 1,35 | 0,19 | 0,60 | 0,97 | 0,14 | 0,45 | 0,72 | 0,12 | 0,39 | 0,63 | 0,11 | 0,36 | 0,57 | .S..GD |
| .S..HD | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..HD |
| .S..Ceramic | 0,17 | 0,33 | 0,49 | 0,12 | 0,24 | 0,35 | 0,09 | 0,18 | 0,27 | 0,08 | 0,15 | 0,23 | 0,07 | 0,14 | 0,21 | .S..Ceramic |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | .007 | .013 | .026 | .005 | .009 | .019 | .004 | .007 | .014 | .003 | .006 | .012 | .003 | .006 | .011 | .F..LDJ |
| .E..LD | .007 | .020 | .040 | .005 | .014 | .029 | .004 | .011 | .021 | .003 | .009 | .019 | .003 | .008 | .017 | .E..LD |
| .S..GD | .010 | .033 | .053 | .007 | .024 | .038 | .006 | .018 | .028 | .005 | .015 | .025 | .004 | .014 | .023 | .S..GD |
| .S..HD | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..HD |
| .S..Ceramic | 0.17 | 0.33 | 0.49 | 0.12 | 0.24 | 0.35 | 0.09 | 0.18 | 0.27 | 0.08 | 0.15 | 0.23 | 0.07 | 0.14 | 0.21 | .S..Ceramic |
| LightMachining | GeneralPurpose | HeavyMachining |
Empfohlene Startwerte für Schnittgeschwindigkeiten [m/min]
| Material Group | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | WP25PM | |||||||||||||
| P | 1 | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | 545 | 475 | 445 | – | – | – | 395 | 340 | 325 |
| 2 | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | 335 | 305 | 275 | – | – | – | 330 | 290 | 240 | |
| 3 | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | 305 | 275 | 245 | – | – | – | 305 | 260 | 210 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 230 | 210 | 190 | – | – | – | 270 | 220 | 180 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 310 | 275 | 250 | – | – | – | 220 | 205 | 180 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 190 | 160 | 130 | – | – | – | 200 | 150 | 120 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 245 | 220 | 185 | – | – | – | 245 | 215 | 200 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 220 | 190 | 170 | – | – | – | 220 | 190 | 155 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 175 | 155 | 140 | – | – | – | 170 | 145 | 115 | |
| K | 1 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 355 | 320 | 290 | 505 | 460 | 410 | 275 | 245 | 220 |
| 2 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 280 | 250 | 230 | 400 | 355 | 330 | 215 | 190 | 180 | |
| 3 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 235 | 210 | 190 | 335 | 300 | 275 | 180 | 160 | 145 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – | 50 | 40 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | 50 | 40 | 30 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | 60 | 50 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | – | – | – | 85 | 60 | 40 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 145 | 110 | 85 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WK25YM | TN6501 | THM-U | |||||||||||||||
| P | 1 | 545 | 475 | 445 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 335 | 305 | 275 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 275 | 245 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 230 | 210 | 190 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 310 | 275 | 250 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | – | – | – | |
| 6 | 190 | 160 | 130 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | – | – | – | |
| M | 1 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – | – | – | – |
| 2 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | – | – | – | |
| 3 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | – | – | – | |
| K | 1 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | 965 | 880 | 780 | – | – | – | – | – | – |
| 2 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | 765 | 685 | 635 | – | – | – | – | – | – | |
| 3 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | 645 | 570 | 525 | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 2400 | 1440 | 1200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 1640 | 980 | 800 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 960 | 600 | 480 | |
| S | 1 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | – | – | – | |
| 4 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | WP25PM | |||||||||||||
| P | 1 | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1790 | 1555 | 1460 | – | – | – | 1295 | 1120 | 1060 |
| 2 | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | 1105 | 1000 | 905 | – | – | – | 1080 | 940 | 785 | |
| 3 | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | 1000 | 905 | 805 | – | – | – | 1000 | 845 | 690 | |
| 4 | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | 750 | 690 | 630 | – | – | – | 890 | 725 | 590 | |
| 5 | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 905 | 830 | – | – | – | 725 | 670 | 590 | |
| 6 | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | 630 | 535 | 430 | – | – | – | 650 | 490 | 395 | |
| M | 1 | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | – | – | – | 805 | 710 | 650 |
| 2 | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | – | – | – | 725 | 630 | 510 | |
| 3 | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | – | – | – | 550 | 475 | 370 | |
| K | 1 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 | 1165 | 1045 | 940 | 1655 | 1520 | 1340 | 905 | 805 | 725 |
| 2 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | 925 | 830 | 750 | 1320 | 1165 | 1080 | 710 | 630 | 590 | |
| 3 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | 770 | 690 | 630 | 1105 | 985 | 905 | 590 | 535 | 475 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – | 155 | 140 | 95 |
| 2 | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | 155 | 140 | 95 | |
| 3 | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | 200 | 155 | 95 | |
| 4 | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | 275 | 200 | 140 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 475 | 355 | 275 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WS30PM | WP35CM | WP40PM | WK25YM | TN6501 | THM-U | |||||||||||||
| P | 1 | – | – | – | 1790 | 1555 | 1460 | 1165 | 1025 | 965 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 1105 | 1000 | 905 | 985 | 845 | 710 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 1000 | 905 | 805 | 905 | 770 | 630 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | 750 | 690 | 630 | 805 | 670 | 535 | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | 1025 | 905 | 830 | 670 | 610 | 535 | – | – | – | – | – | – | – | – | – | |
| 6 | – | – | – | 630 | 535 | 430 | 590 | 450 | 355 | – | – | – | – | – | – | – | – | – | |
| M | 1 | 890 | 785 | 725 | 805 | 725 | 610 | 770 | 670 | 610 | – | – | – | – | – | – | – | – | – |
| 2 | 805 | 710 | 570 | 725 | 630 | 550 | 690 | 590 | 490 | – | – | – | – | – | – | – | – | – | |
| 3 | 610 | 535 | 415 | 570 | 510 | 450 | 510 | 450 | 355 | – | – | – | – | – | – | – | – | – | |
| K | 1 | – | – | – | 1165 | 1045 | 940 | – | – | – | 3170 | 2880 | 2560 | – | – | – | 750 | 670 | 590 |
| 2 | – | – | – | 925 | 830 | 750 | – | – | – | 2510 | 2240 | 2090 | – | – | – | – | – | – | |
| 3 | – | – | – | 770 | 690 | 630 | – | – | – | 2110 | 1870 | 1720 | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 7870 | 4720 | 3935 | 7870 | 4720 | 3935 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 5370 | 3210 | 2615 | 5370 | 3210 | 2615 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 3150 | 1970 | 1570 | 3150 | 1970 | 1570 | |
| S | 1 | 180 | 155 | 120 | – | – | – | 155 | 140 | 120 | – | – | – | – | – | – | – | – | – |
| 2 | 180 | 155 | 120 | – | – | – | 155 | 140 | 120 | – | – | – | – | – | – | – | – | – | |
| 3 | 215 | 180 | 120 | – | – | – | 200 | 155 | 120 | – | – | – | – | – | – | – | – | – | |
| 4 | 335 | 235 | 155 | 260 | 200 | 130 | 260 | 200 | 140 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
