Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

EXIT SEARCH
Back to Solution

Suggestions

Product Suggestions

Product Categories

Resources

Contact us
Weldon® Shanks
Weldon® Shanks
Weldon® Shanks
Weldon® Shanks

M680 • Weldon® Shank

Weldon® Shanks

Features and benefits

  • General-purpose shoulder mill.

  • Excellent selection of grades and geometries.

  • Strong insert providing high reliability.

Uses and application

  • Zylinderschaft – Weldon, 2 SpannflächenZylinderschaft – Weldon, 2 Spannflächen
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Nutenfräsen: Ebene StirnflächeNutenfräsen: Ebene Stirnfläche
  • PlanfräsenPlanfräsen
  • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Weldon® Shanks
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (16)
Applications
  • Face Milling Face Milling (16)
  • Shoulder Milling Shoulder Milling (16)
  • Shoulder Square End Shoulder Square End (16)
  • Slot Milling Slot Milling (16)
  • Slot Square End Slot Square End (16)
Cutting Diameter
  • 19.05 (1)
  • 25.4 (7)
  • 31.75 (5)
  • 38.1 (6)
  • 50.8 (1)
to
Cutting Diameter
  • 0.75 (1)
  • 1.0 (7)
  • 1.25 (5)
  • 1.5 (6)
  • 2.0 (1)
to
Cutting Length
  • 0.55 (20)
to
Cutting Length
  • 13.97 (20)
to
Reach
  • 31.75 (1)
  • 37.338 (1)
  • 42.418 (1)
  • 43.688 (3)
  • 53.848 (2)
  • 57.15 (1)
  • 69.088 (2)
  • 76.2 (2)
  • 94.488 (1)
  • 101.6 (1)
  • 104.648 (2)
  • 152.4 (2)
  • 155.448 (1)
to
Reach
  • 1.25 (1)
  • 1.47 (1)
  • 1.67 (1)
  • 1.72 (3)
  • 2.12 (2)
  • 2.25 (1)
  • 2.72 (2)
  • 3.0 (2)
  • 3.72 (1)
  • 4.0 (1)
  • 4.12 (2)
  • 6.0 (2)
  • 6.12 (1)
to
Tool Cutting Edge Angle
  • 90.0 (20)
to
Connection Style
  • Straight-Cylindrical (1)
  • Weldon (19)
Cutting Edges Per Insert
  • 2.0 (16)
to
cornerConfiguration
Corner Radius
  • 0.4 (16)
  • 0.8 (16)
  • 1.2 (16)
  • 1.6 (16)
  • 1.67 (16)
  • 2.0 (16)
  • 2.5 (16)
  • 3.17 (16)
  • 3.175 (16)
  • 4.0 (16)
to
Corner Radius
  • 0.0157 (16)
  • 0.016 (16)
  • 0.0313 (16)
  • 0.0469 (16)
  • 0.0625 (16)
  • 0.0657 (16)
  • 0.0781 (16)
  • 0.0984 (16)
  • 0.125 (16)
  • 0.1563 (16)
  • 0.1574 (16)
to
application
Grade Of Cutting Tool
  • THM (16)
  • THM-U (16)
  • THR (16)
  • TN2510 (16)
  • TN25M (16)
  • TN450 (16)
  • TN5515 (16)
  • TN6501 (16)
  • TN6502 (16)
  • TN6510 (16)
  • TN6520 (16)
  • TN6525 (16)
  • TN6540 (16)
  • TN7525 (16)
  • TN7535 (16)
  • TTI25 (16)
  • TTM08 (16)
  • TTR (16)
  • WK15CM (16)
  • WP35CM (16)
  • WP40PM (16)
  • WS30PM (16)
  • WU20PM (16)
Hand Of Tool
  • R (20)
frontEnd
Insert Shape
  • X-PARALLELOGRAM 80 (16)
  • X-RECTANGLE MILL 4 90 (16)
backEnd
Connection Type
  • CYLINDRICAL (20)
Back-End Diameter
  • 0.75 (2)
  • 1.0 (3)
  • 1.25 (12)
  • 2.0 (3)
to
Back-End Diameter
  • 19.05 (2)
  • 25.4 (3)
  • 31.75 (12)
  • 50.8 (3)
to
other
Grade
  • W (20)
Platform
  • M680 Series (6)
Tool Unit
  • I (20)
Over All Length [L]
  • 88.9 (1)
  • 93.98 (1)
  • 101.6 (3)
  • 111.76 (2)
  • 127.0 (2)
  • 134.112 (1)
  • 152.4 (1)
  • 162.56 (2)
  • 184.15 (1)
  • 203.2 (1)
  • 213.36 (1)
  • 234.95 (2)
  • 254.0 (2)
to
Over All Length [L]
  • 3.5 (1)
  • 3.7 (1)
  • 4.0 (3)
  • 4.4 (2)
  • 5.0 (2)
  • 5.28 (1)
  • 6.0 (1)
  • 6.4 (2)
  • 7.25 (1)
  • 8.0 (1)
  • 8.4 (1)
  • 9.25 (2)
  • 10.0 (2)
to
Head Length [L2]
  • 31.75 (1)
  • 37.338 (1)
  • 42.418 (1)
  • 43.688 (3)
  • 53.848 (2)
  • 57.15 (1)
  • 69.088 (2)
  • 76.2 (2)
  • 94.488 (1)
  • 101.6 (1)
  • 104.648 (2)
  • 152.4 (2)
  • 155.448 (1)
to
Head Length [L2]
  • 1.25 (1)
  • 1.47 (1)
  • 1.67 (1)
  • 1.72 (3)
  • 2.12 (2)
  • 2.25 (1)
  • 2.72 (2)
  • 3.0 (2)
  • 3.72 (1)
  • 4.0 (1)
  • 4.12 (2)
  • 6.0 (2)
  • 6.12 (1)
to
obsoleteFacet
  • true (20)
  • false (1)
Category Path
Number of Inserts
  • 1.0 (1)
  • 2.0 (7)
  • 3.0 (10)
  • 4.0 (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 20 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
2646674 M680D075Z01W075XP16 M680D075Z01W075XP16 W 19.0500 .7500 19.05 .75 88.9000 3.500 37.3380 1.470 13.9700 .5500 1 17500 Y 0.66
    2646687 M680D100Z02W075XP16 M680D100Z02W075XP16 W 25.4000 1.000 19.05 .75 93.9800 3.700 42.4180 1.670 13.9700 .5500 2 17500 Y 0.70
      2646688 M680D100Z02W100XP16 M680D100Z02W100XP16 W 25.4000 1.000 25.4 1.0 101.6000 4.000 43.6880 1.720 13.9700 .5500 2 17500 Y 0.75
        2646689 M680D100Z02W100XP16L528 M680D100Z02W100XP16L528 W 25.4000 1.000 25.4 1.0 134.1120 5.280 76.2000 3.000 13.9700 .5500 2 17500 Y 1.10
          2646690 M680D100Z02W100XP16L800 M680D100Z02W100XP16L800 W 25.4000 1.000 25.4 1.0 203.2000 8.000 57.1500 2.250 13.9700 .5500 2 17500 Y 1.70
            2646691 M680D100Z02W125XP16 M680D100Z02W125XP16 W 25.4000 1.000 31.75 1.25 127.0000 5.000 69.0880 2.720 13.9700 .5500 2 17500 Y 1.10
              2646692 M680D100Z02W125XP16L640 M680D100Z02W125XP16L640 W 25.4000 1.000 31.75 1.25 162.5600 6.400 104.6480 4.120 13.9700 .5500 2 17500 Y 1.60
                2646693 M680D100Z02W125XP16L840 M680D100Z02W125XP16L840 W 25.4000 1.000 31.75 1.25 213.3600 8.400 155.4480 6.120 13.9700 .5500 2 17500 Y 1.80
                  2646700 M680D125Z03W125XP16 M680D125Z03W125XP16 W 31.7500 1.250 31.75 1.25 101.6000 4.000 43.6880 1.720 13.9700 .5500 3 15500 Y 1.10
                    2646701 M680D125Z03W125XP16L1000 M680D125Z03W125XP16L1000 W 31.7500 1.250 31.75 1.25 254.0000 10.000 76.2000 3.000 13.9700 .5500 3 15500 Y 2.72
                      2646702 M680D125Z03W125XP16L500 M680D125Z03W125XP16L500 W 31.7500 1.250 31.75 1.25 127.0000 5.000 69.0880 2.720 13.9700 .5500 3 15500 Y 1.40
                        2646703 M680D125Z03W125XP16L640 M680D125Z03W125XP16L640 W 31.7500 1.250 31.75 1.25 162.5600 6.400 104.6480 4.120 13.9700 .5500 3 15500 Y 1.60
                          2646704 M680D125Z03W200XP16 M680D125Z03W200XP16 W 31.7500 1.250 50.8 2.0 234.9500 9.250 152.4000 6.000 13.9700 .5500 3 15500 Y 3.80
                            2646713 M680D150Z03W125XP16 M680D150Z03W125XP16 W 38.1000 1.500 31.75 1.25 111.7600 4.400 53.8480 2.120 13.9700 .5500 3 14000 Y 1.76
                              2646714 M680D150Z03W125XP16L1000 M680D150Z03W125XP16L1000 W 38.1000 1.500 31.75 1.25 254.0000 10.000 31.7500 1.250 13.9700 .5500 3 14000 Y 2.80
                                2646716 M680D150Z03W125XP16L600 M680D150Z03W125XP16L600 W 38.1000 1.500 31.75 1.25 152.4000 6.000 94.4880 3.720 13.9700 .5500 3 14000 Y 2.10
                                  2646717 M680D150Z03W200XP16 M680D150Z03W200XP16 W 38.1000 1.500 50.8 2.0 184.1500 7.250 101.6000 4.000 13.9700 .5500 3 14000 Y 3.80
                                    2646718 M680D150Z03W200XP16L925 M680D150Z03W200XP16L925 W 38.1000 1.500 50.8 2.0 234.9500 9.250 152.4000 6.000 13.9700 .5500 3 14000 Y 4.20
                                      2646715 M680D150Z04W125XP16 M680D150Z04W125XP16 W 38.1000 1.500 31.75 1.25 111.7600 4.400 53.8480 2.120 13.9700 .5500 4 14000 Y 1.76
                                        2646719 M680D200Z04C125XP16L400 M680D200Z04C125XP16L400 W 50.8000 2.000 31.75 1.25 101.6000 4.000 43.6880 1.720 13.9700 .5500 4 12500 Y 2.80
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor

                                          Grades

                                          • W
                                            P Steel
                                            M Stainless Steel
                                            K Cast Iron
                                            N Non-Ferrous
                                            S High-Temp Alloys
                                            H Hardened Materials

                                          HILFE

                                          Chatten Sie mit einem Zerspanungsexperten.

                                          Von 8:00 Uhr bis 18:00 Uhr Eastern Standard Time

                                          Produkt

                                          E-Mail-Adresse

                                          +1 (888) 539 5145

                                          Bestellen

                                          E-Mail-Adresse

                                          +1 (800) 979 4342

                                          UNTERNEHMEN

                                          Arbeiten Sie in unserem Expertenteam

                                          Wir über uns

                                           

                                          UNSERE MARKEN

                                          DOWNLOADS

                                          SHOP

                                          WIDIA-Werbeartikel kaufen

                                          WIDIA-Produkte bei Amazon kaufen


                                           

                                           

                                           


                                          BLEIBEN SIE IN KONTAKT

                                           

                                          © 2021 WIDIA Product Group, Datenschutzrichtlinie

                                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                          You are about to create a duplicate . Do you want to proceed?
                                          You are about to delete Do you want to proceed?
                                          What would you like to rename your to?
                                          Please enter a valid name
                                          Please enter a name for the duplicate
                                          Please enter a valid name
                                          You are about to add to your My Solutions page. Do you want to proceed?
                                          Please enter a valid name
                                          Send a copy of

                                          Please enter a valid Email
                                          Please enter a valid name

                                          We have found the following CAD Drawings

                                          Select the files you are looking for and download them all at once

                                          Can’t find the file type you’re looking for?
                                          Request Drawings »

                                          You should be logged to see your dashboard information
                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                          item(s) successfully added to the cart
                                          View Cart