successfully added to cart
View Cart
M-Klemmung
M-Klemmung
M-Klemmung
M-Klemmung

MCLN 95° - KM32TS Schneidköpfe zur Innenbearbeitung (M-Klemmung)

M-Klemmung

Uses and application

  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum
      (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3)
    • N6
      Carbon, Graphite Composites, CFRP
      (3)
    • N7
      MMC's
      (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC
      (3)
    • H2
      Hardened Materials 48-55 HRC
      (3)
    • H3
      Hardened Materials 56-60 HRC
      (3)
    • H4
      Hardened Materials >60 HRC
      (3)
Applications
Applications
  • Facing Facing (3)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (2)
  • Turning Turning (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3)
  • Interrupted (3)
  • Lightly Interrupted Cut (3)
  • Smooth Cut (3)
  • Varying Depth of Cut (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (3)
  • 2.0 (3)
  • 4.0 (3)
  • 8.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.1 mm (3)
  • 0.102 mm (3)
  • 0.2 mm (3)
  • 0.203 mm (3)
  • 0.397 mm (3)
  • 0.4 mm (3)
  • 0.792 mm (3)
  • 0.794 mm (3)
  • 0.8 mm (3)
  • 1.19 mm (3)
  • 1.191 mm (3)
  • 1.2 mm (3)
  • 1.587 mm (3)
  • 1.588 mm (3)
  • 1.6 mm (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (3)
  • 0.008 in (3)
  • 0.0083 in (3)
  • 0.0156 in (3)
  • 0.016 in (3)
  • 0.031 in (3)
  • 0.0312 in (3)
  • 0.0313 in (3)
  • 0.0315 in (3)
  • 0.0469 in (3)
  • 0.047 in (3)
  • 0.0472 in (3)
  • 0.0625 in (3)
  • 0.063 in (3)
  • 0.1563 in (3)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (3)
  • 241 (3)
  • CL4 (3)
  • CM2 (3)
  • CM3 (3)
  • CM4 (3)
  • CPX (3)
  • CW2 (3)
  • CW2015 (3)
  • CW5025 (3)
  • GX (3)
  • HK1500 (3)
  • HT2 (3)
  • HTX (3)
  • K060 (3)
  • K090 (3)
  • K1 (3)
  • K10M (3)
  • K10P (3)
  • K10U (3)
  • K15U (3)
  • K20K (3)
  • K21 (3)
  • K25M (3)
  • K25P (3)
  • K313 (3)
  • K420 (3)
  • K45 (3)
  • K68 (3)
  • KB1340 (3)
  • KB1345 (3)
  • KB1610 (3)
  • KB1625 (3)
  • KB1630 (3)
  • KB5610 (3)
  • KB5625 (3)
  • KB5630 (3)
  • KB9610 (3)
  • KB9640 (3)
  • KBH10 (3)
  • KBH10B (3)
  • KBH20 (3)
  • KBH20B (3)
  • KBK35 (3)
  • KC210 (3)
  • KC250 (3)
  • KC5010 (3)
  • KC5025 (3)
  • KC5410 (3)
  • KC5510 (3)
  • KC5525 (3)
  • KC710 (3)
  • KC720 (3)
  • KC722 (3)
  • KC730 (3)
  • KC7310 (3)
  • KC732 (3)
  • KC8050 (3)
  • KC810 (3)
  • KC850 (3)
  • KC9010 (3)
  • KC9025 (3)
  • KC910 (3)
  • KC9105 (3)
  • KC9110 (3)
  • KC9120 (3)
  • KC9125 (3)
  • KC9140 (3)
  • KC9145 (3)
  • KC9215 (3)
  • KC9225 (3)
  • KC9240 (3)
  • KC9240NEW (3)
  • KC9245 (3)
  • KC9315 (3)
  • KC9320 (3)
  • KC9325 (3)
  • KC935 (3)
  • KC950 (3)
  • KC990 (3)
  • KCK05 (3)
  • KCK05B (3)
  • KCK15 (3)
  • KCK15B (3)
  • KCK20 (3)
  • KCK20B (3)
  • KCM15 (3)
  • KCM15B (3)
  • KCM25 (3)
  • KCM25B (3)
  • KCM35 (3)
  • KCM35B (3)
  • KCP05 (3)
  • KCP05B (3)
  • KCP10 (3)
  • KCP10B (3)
  • KCP25 (3)
  • KCP25B (3)
  • KCP30 (3)
  • KCP30B (3)
  • KCP40 (3)
  • KCP40B (3)
  • KCPK05 (3)
  • KCS10 (3)
  • KCS10B (3)
  • KCU10 (3)
  • KCU25 (3)
  • KD050 (3)
  • KD081 (3)
  • KD100 (3)
  • KD120 (3)
  • KD1400 (3)
  • KD1405 (3)
  • KD1425 (3)
  • KM1 (3)
  • KMF (3)
  • KT1120 (3)
  • KT125 (3)
  • KT150 (3)
  • KT175 (3)
  • KT315 (3)
  • KT325 (3)
  • KU10T (3)
  • KU30T (3)
  • KY1310 (3)
  • KY1320 (3)
  • KY1540 (3)
  • KY1615 (3)
  • KY2000 (3)
  • KY2100 (3)
  • KY3000 (3)
  • KY3400 (3)
  • KY3500 (3)
  • KY4000 (3)
  • KY4300 (3)
  • KY4400 (3)
  • KYHK15B (3)
  • KYK10 (3)
  • KYK25 (3)
  • KYK35 (3)
  • KYS25 (3)
  • KYS30 (3)
  • NL200 (3)
  • NL250 (3)
  • NL300 (3)
  • NL400 (3)
  • NL920 (3)
  • P25 (3)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PS5 (3)
  • SP0819 (3)
  • SP3019 (3)
  • SP4019 (3)
  • THM (3)
  • THM-X (3)
  • THMF-X (3)
  • TN10P (3)
  • TN10U (3)
  • TN15M (3)
  • TN15U (3)
  • TN2000 (3)
  • TN20K (3)
  • TN20P (3)
  • TN30M (3)
  • TN30P (3)
  • TN4000 (3)
  • TN5015 (3)
  • TN5020 (3)
  • TN5105 (3)
  • TN5120 (3)
  • TN6010 (3)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (3)
  • TN7015 (3)
  • TN7025 (3)
  • TN7035 (3)
  • TN7105 (3)
  • TN7110 (3)
  • TN7115 (3)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (3)
  • TTI15 (3)
  • TTR (3)
  • TTS (3)
  • TTX (3)
  • WBH10C (3)
  • WBH10P (3)
  • WBH10U (3)
  • WBH20P (3)
  • WBH25P (3)
  • WBH25U (3)
  • WBH30P (3)
  • WBK40U (3)
  • WBK45U (3)
  • WDN00U (3)
  • WDN25U (3)
  • WK05CT (3)
  • WK15CT (3)
  • WK20CT (3)
  • WM15CT (3)
  • WM25CT (3)
  • WM35CT (3)
  • WP05CT (3)
  • WP15CT (3)
  • WP25CT (3)
  • WP35CT (3)
  • WS10PT (3)
  • WS25PT (3)
  • WU10HT (3)
  • WU10PT (3)
  • WU25PT (3)
  • X00511 (3)
Hand Of Tool
Hand Of Tool
  • L (1)
  • R (2)
Wiper Insert
Wiper Insert
  • N (3)
  • Y (3)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.2598 in (2)
  • 1.26 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (1)
  • DOUBLE POSITIVE (2)
Maximum Bore Depth
Maximum Bore Depth
  • 58.0 mm (1)
  • 60.0 mm (1)
  • 75.0 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.2835 in (1)
  • 2.362 in (1)
  • 2.9528 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (3)
  • B L (3)
  • C A (3)
  • C N (3)
  • D P (3)
  • H T (3)
  • H W (3)
backEnd
System Size
System Size
  • KM32 (2)
  • KM32TS (1)
Back-End Diameter
Back-End Diameter
  • 1.258 in (1)
  • 1.2598 in (2)
Back-End Diameter Min to Back-End Diameter Max
other
Cutting Condition Material
Cutting Condition Material
  • H-All (3)
  • K-All (3)
  • K1 (3)
  • M-All (3)
  • N-All (3)
  • P-All (3)
  • S-All (3)
  • S2 (3)
  • S4 (3)
Over All Length [L]
Over All Length [L]
  • 70.0 mm (2)
  • 90.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 2.7559 in (1)
  • 2.756 in (1)
  • 3.5433 in (1)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 3 of 3 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
    List price:
    $364.32 /each.
    Your price::
    Qty
    1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
      List price:
      $364.32 /each.
      Your price::
      Qty
      1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        List price:
        $364.32 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        product-image
        Please adjust the following properties from

        ISO Katalog

        ANSI Katalog

        to find similar products.
        You are about to create a duplicate . Do you want to proceed?
        You are about to delete Do you want to proceed?
        What would you like to rename your to?
        Please enter a valid name
        Please enter a name for the duplicate
        Please enter a valid name
        You are about to add to your My Solutions page. Do you want to proceed?
        Please enter a valid name
        Send a copy of

        Please enter a valid Email
        Please enter a valid name

        We have found the following CAD Drawings

        Select the files you are looking for and download them all at once

        You should be logged to see your dashboard information
        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
        item(s) successfully added to the cart
        View Cart