successfully added to cart
View Cart
M-Klemmung
M-Klemmung
M-Klemmung
M-Klemmung

MCLN 95°

M-Klemmung

Uses and application

  • Schaft –  KM-XMZSchaft – KM-XMZ
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
Applications
  • Facing Facing (4)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (4)
  • Turning Turning (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Interrupted (4)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Varying Depth of Cut (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (2)
  • 2.0 (4)
  • 4.0 (4)
  • 8.0 (4)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.1 mm (2)
  • 0.102 mm (2)
  • 0.2 mm (2)
  • 0.203 mm (2)
  • 0.397 mm (2)
  • 0.4 mm (4)
  • 0.792 mm (2)
  • 0.794 mm (2)
  • 0.8 mm (4)
  • 1.188 mm (2)
  • 1.19 mm (2)
  • 1.191 mm (4)
  • 1.2 mm (4)
  • 1.587 mm (2)
  • 1.588 mm (4)
  • 1.6 mm (4)
  • 2.38 mm (2)
  • 2.4 mm (2)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (2)
  • 0.008 in (2)
  • 0.0083 in (2)
  • 0.0156 in (4)
  • 0.016 in (2)
  • 0.031 in (2)
  • 0.0312 in (2)
  • 0.0313 in (4)
  • 0.0315 in (2)
  • 0.0468 in (2)
  • 0.0469 in (4)
  • 0.047 in (4)
  • 0.0472 in (2)
  • 0.0625 in (4)
  • 0.063 in (4)
  • 0.0938 in (2)
  • 0.094 in (2)
  • 0.126 in (2)
  • 0.1563 in (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (2)
  • CM2 (4)
  • CM3 (2)
  • CM4 (4)
  • CPX (4)
  • CW2 (2)
  • CW2015 (4)
  • CW5025 (4)
  • GX (2)
  • HK1500 (2)
  • HT2 (2)
  • HTX (2)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (4)
  • K10P (4)
  • K10U (2)
  • K15U (2)
  • K20K (4)
  • K21 (2)
  • K25M (4)
  • K25P (2)
  • K313 (4)
  • K35P (2)
  • K420 (4)
  • K45 (2)
  • K68 (4)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KB9640 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KBK35 (2)
  • KC210 (2)
  • KC250 (4)
  • KC5010 (4)
  • KC5025 (4)
  • KC5410 (4)
  • KC5510 (4)
  • KC5525 (2)
  • KC710 (2)
  • KC720 (4)
  • KC722 (2)
  • KC730 (4)
  • KC7310 (4)
  • KC732 (4)
  • KC8050 (4)
  • KC810 (4)
  • KC850 (4)
  • KC9010 (4)
  • KC9025 (4)
  • KC910 (4)
  • KC9105 (4)
  • KC9110 (4)
  • KC9120 (4)
  • KC9125 (4)
  • KC9140 (4)
  • KC9145 (4)
  • KC9215 (4)
  • KC9225 (4)
  • KC9240 (4)
  • KC9240NEW (4)
  • KC9245 (4)
  • KC9315 (4)
  • KC9320 (4)
  • KC9325 (4)
  • KC935 (4)
  • KC950 (4)
  • KC990 (4)
  • KCK05 (4)
  • KCK05B (4)
  • KCK15 (4)
  • KCK15B (4)
  • KCK20 (4)
  • KCK20B (4)
  • KCM15 (4)
  • KCM15B (4)
  • KCM25 (4)
  • KCM25B (4)
  • KCM35 (4)
  • KCM35B (4)
  • KCP05 (4)
  • KCP05B (2)
  • KCP10 (4)
  • KCP10B (4)
  • KCP25 (4)
  • KCP25B (4)
  • KCP30 (4)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (4)
  • KCS10 (2)
  • KCS10B (4)
  • KCU10 (4)
  • KCU25 (4)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (2)
  • KT315 (2)
  • KT325 (2)
  • KU10T (2)
  • KU30T (4)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (4)
  • KY4300 (4)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (2)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (4)
  • NL300 (4)
  • NL400 (4)
  • NL920 (2)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (2)
  • SP0819 (4)
  • SP3019 (4)
  • SP4019 (4)
  • THM (2)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (4)
  • TN10U (2)
  • TN15M (4)
  • TN15U (2)
  • TN2000 (2)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN30P (4)
  • TN4000 (2)
  • TN5015 (4)
  • TN5020 (4)
  • TN5105 (2)
  • TN5120 (4)
  • TN6010 (2)
  • TN6025 (2)
  • TN7005 (2)
  • TN7010 (4)
  • TN7015 (4)
  • TN7025 (4)
  • TN7035 (4)
  • TN7105 (2)
  • TN7110 (4)
  • TN7115 (4)
  • TN7125 (4)
  • TN7135 (4)
  • TN8025 (4)
  • TTI15 (2)
  • TTR (2)
  • TTS (2)
  • TTX (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (2)
  • WBH25P (2)
  • WBH25U (2)
  • WBH30P (2)
  • WBK40U (2)
  • WBK45U (2)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (4)
  • WK15CT (2)
  • WK20CT (4)
  • WM15CT (4)
  • WM25CT (4)
  • WM35CT (4)
  • WP05CT (2)
  • WP15CT (4)
  • WP25CT (4)
  • WP35CT (4)
  • WS10PT (4)
  • WS25PT (4)
  • WU10HT (4)
  • WU10PT (2)
  • WU25PT (2)
  • X00511 (2)
Wiper Insert
Wiper Insert
  • N (4)
  • Y (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C A (4)
  • C N (4)
  • D P (2)
  • H T (2)
  • H W (4)
other
Platform
Platform
  • KM63 (3)
  • KM63XMZ (1)
Cutting Condition Material
Cutting Condition Material
  • H-All (4)
  • K-All (4)
  • K1 (2)
  • M-All (4)
  • N-All (4)
  • P-All (4)
  • S-All (4)
  • S2 (4)
  • S4 (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3103486 KM63XMZMCLNLF16Y KM63XMZMCLNLF16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
    List price:
    $319.03 /each.
    Your price::
    Qty
    1551813 KM63XMZMCLNR12Y KM63XMZMCLNR12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
      List price:
      $319.03 /each.
      Your price::
      Qty
      1603738 KM63XMZMCLNR16Y KM63XMZMCLNR16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
        List price:
        $319.03 /each.
        Your price::
        Qty
        3103485 KM63XMZMCLNLF12Y KM63XMZMCLNLF12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
          List price:
          $319.03 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          product-image
          Please adjust the following properties from

          ISO Katalog

          ANSI Katalog

          to find similar products.
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart