successfully added to cart
View Cart
COVID-19: How WIDIA is responding

Metrische Schäfte

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (184)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (184)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (184)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (184)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (184)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (184)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (184)
  • M Stainless Steel (184)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (184)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (184)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (184)
  • K Cast Iron (184)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (184)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (184)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (184)
  • S High-Temp Alloys (184)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (184)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (184)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (184)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (184)
Select First Choice
  • CN (20)
  • DE (26)
  • IN (1)
  • US (4)
Applications
  • Convex Drilling Convex Drilling (184)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (120)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (120)
  • Counterboring Counterboring (120)
  • Countersinking Countersinking (120)
  • Drilling Drilling (184)
  • Flat Bottom Drilling Flat Bottom Drilling (120)
  • Inclined Entry Drilling Inclined Entry Drilling (184)
  • Inclined Exit Drilling Inclined Exit Drilling (184)
  • Stacked Plates Drilling Stacked Plates Drilling (184)
  • X-Offset Drilling X-Offset Drilling (120)
Cutting Diameter
  • 16.0 (10)
  • 16.2 (10)
  • 16.281 (10)
  • 16.5 (10)
  • 16.667 (10)
  • 17.0 (10)
  • 17.063 (10)
  • 17.064 (10)
  • 17.463 (10)
  • 17.5 (10)
  • 17.6 (10)
  • 17.8 (10)
  • 17.859 (10)
  • 18.0 (10)
  • 18.255 (10)
  • 18.5 (10)
  • 18.651 (10)
  • 18.8 (10)
  • 19.0 (10)
  • 19.05 (10)
  • 19.2 (10)
  • 19.27 (10)
  • 19.45 (10)
  • 19.5 (10)
  • 19.7 (10)
  • 19.84 (10)
  • 20.0 (10)
  • 20.1 (10)
  • 20.2 (10)
  • 20.239 (10)
  • 20.3 (10)
  • 20.4 (10)
  • 20.5 (10)
  • 20.6 (10)
  • 20.65 (10)
  • 20.7 (10)
  • 20.8 (10)
  • 20.9 (10)
  • 21.0 (10)
  • 21.43 (10)
  • 21.5 (10)
  • 22.0 (10)
  • 22.225 (10)
  • 22.45 (10)
  • 22.5 (10)
  • 23.0 (10)
  • 23.5 (10)
  • 23.812 (10)
  • 24.0 (10)
  • 24.5 (10)
  • 24.605 (10)
  • 25.0 (10)
  • 25.4 (10)
  • 25.5 (10)
  • 25.67 (10)
  • 25.7 (10)
  • 25.76 (10)
  • 25.796 (10)
  • 26.0 (10)
  • 26.192 (10)
  • 26.4 (10)
  • 26.5 (10)
  • 26.589 (10)
  • 27.0 (10)
  • 27.5 (10)
  • 27.78 (10)
  • 28.0 (10)
  • 28.176 (10)
  • 28.5 (10)
  • 28.575 (10)
  • 29.0 (10)
  • 29.367 (10)
  • 29.5 (10)
  • 29.764 (10)
  • 30.0 (10)
  • 30.163 (10)
  • 30.5 (10)
  • 30.955 (10)
  • 31.0 (10)
  • 31.5 (10)
  • 31.75 (10)
  • 32.0 (6)
  • 32.5 (6)
  • 33.0 (6)
  • 33.338 (6)
  • 34.0 (6)
  • 34.13 (6)
  • 34.925 (6)
  • 35.0 (6)
  • 35.5 (6)
  • 36.0 (6)
  • 36.5 (6)
  • 37.0 (6)
  • 37.5 (6)
  • 38.0 (6)
  • 38.1 (6)
  • 38.289 (6)
  • 38.5 (6)
  • 39.0 (6)
  • 39.289 (6)
  • 39.5 (6)
  • 40.0 (6)
to
Cutting Diameter
  • 0.6299 (10)
  • 0.6378 (10)
  • 0.641 (10)
  • 0.6496 (10)
  • 0.6562 (10)
  • 0.6693 (10)
  • 0.6718 (10)
  • 0.6875 (10)
  • 0.689 (10)
  • 0.6929 (10)
  • 0.7008 (10)
  • 0.7031 (10)
  • 0.7087 (10)
  • 0.7187 (10)
  • 0.7283 (10)
  • 0.7343 (10)
  • 0.7402 (10)
  • 0.748 (10)
  • 0.75 (10)
  • 0.7559 (10)
  • 0.7587 (10)
  • 0.7657 (10)
  • 0.7677 (10)
  • 0.7756 (10)
  • 0.7811 (10)
  • 0.7874 (10)
  • 0.7913 (10)
  • 0.7953 (10)
  • 0.7968 (10)
  • 0.7992 (10)
  • 0.8031 (10)
  • 0.8071 (10)
  • 0.811 (10)
  • 0.813 (10)
  • 0.815 (10)
  • 0.8189 (10)
  • 0.8228 (10)
  • 0.8268 (10)
  • 0.8437 (10)
  • 0.8465 (10)
  • 0.8661 (10)
  • 0.875 (10)
  • 0.8839 (10)
  • 0.8858 (10)
  • 0.9055 (10)
  • 0.9252 (10)
  • 0.9375 (10)
  • 0.9449 (10)
  • 0.9646 (10)
  • 0.9687 (10)
  • 0.9843 (10)
  • 1.0 (10)
  • 1.0039 (10)
  • 1.0106 (10)
  • 1.0118 (10)
  • 1.0142 (10)
  • 1.0156 (10)
  • 1.0236 (10)
  • 1.0312 (10)
  • 1.0394 (10)
  • 1.0433 (10)
  • 1.0468 (10)
  • 1.063 (10)
  • 1.0827 (10)
  • 1.0937 (10)
  • 1.1024 (10)
  • 1.1093 (10)
  • 1.122 (10)
  • 1.125 (10)
  • 1.1417 (10)
  • 1.1562 (10)
  • 1.1614 (10)
  • 1.1718 (10)
  • 1.1811 (10)
  • 1.1875 (10)
  • 1.2008 (10)
  • 1.2187 (10)
  • 1.2205 (10)
  • 1.2402 (10)
  • 1.25 (10)
  • 1.2598 (6)
  • 1.2795 (6)
  • 1.2992 (6)
  • 1.3125 (6)
  • 1.3386 (6)
  • 1.3437 (6)
  • 1.375 (6)
  • 1.378 (6)
  • 1.3976 (6)
  • 1.4173 (6)
  • 1.437 (6)
  • 1.4567 (6)
  • 1.4764 (6)
  • 1.4961 (6)
  • 1.5 (6)
  • 1.5074 (6)
  • 1.5157 (6)
  • 1.5354 (6)
  • 1.5468 (6)
  • 1.5551 (6)
  • 1.5748 (6)
to
Maximum Hole Depth [L4]
  • 1.0236 (2)
  • 1.063 (2)
  • 1.1417 (2)
  • 1.1806 (1)
  • 1.1811 (1)
  • 1.2598 (2)
  • 1.2992 (2)
  • 1.378 (2)
  • 1.4173 (2)
  • 1.4961 (2)
  • 1.5354 (2)
  • 1.6142 (2)
  • 1.6535 (2)
  • 1.7323 (2)
  • 1.7715 (1)
  • 1.7717 (1)
  • 1.8504 (2)
  • 1.8898 (2)
  • 2.0079 (2)
  • 2.126 (2)
  • 2.2441 (2)
  • 2.3621 (1)
  • 2.3622 (1)
  • 2.4803 (2)
  • 2.5984 (2)
  • 2.6992 (1)
  • 2.7165 (2)
  • 2.8346 (2)
  • 2.9528 (2)
  • 3.0709 (2)
  • 3.189 (2)
  • 3.3071 (2)
  • 3.3465 (1)
  • 3.3469 (1)
  • 3.4252 (2)
  • 3.5432 (1)
  • 3.5433 (3)
  • 3.6614 (2)
  • 3.7402 (2)
  • 3.7795 (2)
  • 3.937 (2)
  • 4.0157 (2)
  • 4.1339 (2)
  • 4.252 (2)
  • 4.3307 (2)
  • 4.4882 (2)
  • 4.5276 (2)
  • 4.7244 (4)
  • 4.9213 (2)
  • 5.1181 (2)
  • 5.315 (2)
  • 5.3543 (2)
  • 5.5118 (2)
  • 5.6693 (2)
  • 5.7087 (2)
  • 5.9055 (2)
  • 5.9843 (2)
  • 6.1024 (2)
  • 6.2992 (2)
  • 6.2993 (1)
  • 6.6142 (2)
  • 6.6929 (2)
  • 6.9291 (2)
  • 7.0866 (2)
  • 7.2441 (2)
  • 7.4803 (2)
  • 7.5591 (2)
  • 7.874 (4)
  • 8.0315 (2)
  • 8.189 (2)
  • 8.5039 (4)
  • 8.8189 (2)
  • 8.9764 (2)
  • 9.1339 (2)
  • 9.4488 (4)
  • 9.7638 (2)
  • 9.9213 (2)
  • 10.0787 (2)
  • 10.3937 (2)
  • 10.7087 (2)
  • 10.8661 (2)
  • 11.3386 (4)
  • 11.8109 (1)
  • 11.811 (1)
  • 11.9685 (2)
  • 12.2835 (2)
  • 12.5984 (2)
  • 12.7559 (2)
  • 13.2283 (2)
  • 13.7008 (2)
  • 14.1731 (1)
  • 14.1733 (1)
  • 14.6457 (2)
  • 15.1181 (2)
to
Maximum Hole Depth [L4]
  • 26.0 (2)
  • 27.0 (2)
  • 29.0 (2)
  • 30.0 (2)
  • 32.0 (2)
  • 33.0 (2)
  • 35.0 (2)
  • 36.0 (2)
  • 38.0 (2)
  • 39.0 (2)
  • 41.0 (2)
  • 42.0 (2)
  • 44.0 (2)
  • 45.0 (2)
  • 47.0 (2)
  • 48.0 (2)
  • 51.0 (2)
  • 54.0 (2)
  • 57.0 (2)
  • 60.0 (2)
  • 63.0 (2)
  • 66.0 (2)
  • 69.0 (2)
  • 72.0 (2)
  • 75.0 (2)
  • 78.0 (2)
  • 81.0 (2)
  • 84.0 (2)
  • 85.0 (2)
  • 87.0 (2)
  • 90.0 (4)
  • 93.0 (2)
  • 95.0 (2)
  • 96.0 (2)
  • 100.0 (2)
  • 102.0 (2)
  • 105.0 (2)
  • 108.0 (2)
  • 110.0 (2)
  • 114.0 (2)
  • 115.0 (2)
  • 120.0 (4)
  • 125.0 (2)
  • 130.0 (2)
  • 135.0 (2)
  • 136.0 (2)
  • 140.0 (2)
  • 144.0 (2)
  • 145.0 (2)
  • 150.0 (2)
  • 152.0 (2)
  • 155.0 (2)
  • 160.0 (4)
  • 168.0 (2)
  • 170.0 (2)
  • 176.0 (2)
  • 180.0 (2)
  • 184.0 (2)
  • 190.0 (2)
  • 192.0 (2)
  • 200.0 (4)
  • 204.0 (2)
  • 208.0 (2)
  • 216.0 (4)
  • 224.0 (2)
  • 228.0 (2)
  • 232.0 (2)
  • 240.0 (4)
  • 248.0 (2)
  • 252.0 (2)
  • 256.0 (2)
  • 264.0 (2)
  • 272.0 (2)
  • 276.0 (2)
  • 288.0 (4)
  • 299.997 (1)
  • 300.0 (1)
  • 304.0 (2)
  • 312.0 (2)
  • 320.0 (2)
  • 324.0 (2)
  • 336.0 (2)
  • 348.0 (2)
  • 360.0 (2)
  • 372.0 (2)
  • 384.0 (2)
to
Connection Style
  • Cylindrical Shank 1 Flat (152)
  • Straight-Cylindrical w/Flange (32)
Number of Flutes
  • 2 (184)
Cutting Edges Per Insert
  • 0.0 (184)
to
application
Grade Of Cutting Tool
  • WM15PD (184)
  • WP40PD (184)
Hand Of Tool
  • R (184)
Drill Type
  • 86-01 (184)
frontEnd
Insert Shape
  • TDMX DRILL (184)
Point Angle
  • 140.0 (184)
  • 150.0 (184)
to
backEnd
Connection Type
  • CYLINDRICAL (184)
Back-End Diameter
  • 0.75 (10)
  • 0.7874 (10)
  • 0.9843 (30)
  • 1.0 (30)
  • 1.25 (40)
  • 1.2598 (40)
  • 1.5 (12)
  • 1.5748 (12)
to
Back-End Diameter
  • 19.05 (10)
  • 20.0 (10)
  • 25.0 (30)
  • 25.4 (30)
  • 31.75 (40)
  • 32.0 (40)
  • 38.1 (12)
  • 40.0 (12)
to
other
Platform
  • TDMX (184)
Tool Unit
  • I (16)
  • M (168)
Over All Length [L]
  • 106.0 (2)
  • 109.0 (2)
  • 118.0 (2)
  • 121.0 (2)
  • 124.0 (2)
  • 127.0 (2)
  • 130.0 (2)
  • 131.0 (2)
  • 133.0 (2)
  • 136.0 (2)
  • 140.0 (2)
  • 143.0 (2)
  • 146.0 (4)
  • 149.0 (2)
  • 151.0 (2)
  • 152.0 (2)
  • 155.0 (4)
  • 158.0 (2)
  • 160.0 (2)
  • 161.0 (2)
  • 164.0 (2)
  • 165.0 (2)
  • 169.0 (2)
  • 172.0 (2)
  • 177.0 (2)
  • 182.0 (2)
  • 184.0 (2)
  • 186.0 (2)
  • 191.0 (4)
  • 195.0 (2)
  • 197.0 (2)
  • 200.0 (2)
  • 204.0 (4)
  • 209.0 (2)
  • 210.0 (2)
  • 216.0 (2)
  • 217.0 (2)
  • 226.0 (2)
  • 227.0 (2)
  • 228.0 (2)
  • 234.0 (2)
  • 237.0 (2)
  • 240.0 (2)
  • 241.0 (2)
  • 246.0 (2)
  • 247.0 (2)
  • 251.0 (2)
  • 253.0 (2)
  • 255.0 (2)
  • 260.0 (4)
  • 266.0 (2)
  • 270.0 (2)
  • 273.0 (2)
  • 279.0 (2)
  • 284.0 (2)
  • 289.0 (2)
  • 296.0 (2)
  • 298.0 (2)
  • 302.0 (2)
  • 309.0 (2)
  • 312.0 (2)
  • 317.0 (2)
  • 321.0 (2)
  • 322.0 (2)
  • 331.0 (4)
  • 335.0 (2)
  • 340.0 (2)
  • 344.0 (2)
  • 350.0 (2)
  • 358.0 (2)
  • 359.0 (2)
  • 369.0 (2)
  • 371.0 (2)
  • 385.0 (2)
  • 398.0 (2)
  • 402.0 (2)
  • 416.0 (2)
  • 417.0 (2)
  • 429.0 (2)
  • 436.0 (2)
  • 443.0 (2)
  • 455.0 (2)
  • 456.0 (2)
  • 470.0 (2)
  • 483.0 (2)
  • 497.0 (2)
to
Over All Length [L]
  • 4.1728 (1)
  • 4.1732 (1)
  • 4.2913 (2)
  • 4.6456 (2)
  • 4.7638 (2)
  • 4.8819 (2)
  • 5.0 (2)
  • 5.1181 (2)
  • 5.1574 (1)
  • 5.1575 (1)
  • 5.2362 (2)
  • 5.3543 (2)
  • 5.5118 (2)
  • 5.6299 (2)
  • 5.748 (4)
  • 5.8661 (2)
  • 5.9448 (1)
  • 5.9449 (1)
  • 5.9843 (2)
  • 6.1024 (4)
  • 6.2205 (2)
  • 6.2992 (2)
  • 6.3386 (2)
  • 6.4567 (2)
  • 6.4961 (2)
  • 6.6535 (2)
  • 6.7717 (2)
  • 6.9685 (2)
  • 7.1654 (2)
  • 7.2441 (2)
  • 7.3228 (2)
  • 7.5197 (4)
  • 7.6772 (2)
  • 7.7559 (2)
  • 7.874 (2)
  • 8.0315 (4)
  • 8.2283 (2)
  • 8.2677 (2)
  • 8.5039 (2)
  • 8.5433 (2)
  • 8.8976 (2)
  • 8.937 (2)
  • 8.9764 (2)
  • 9.2126 (2)
  • 9.3307 (2)
  • 9.4488 (2)
  • 9.4882 (2)
  • 9.685 (2)
  • 9.7244 (2)
  • 9.8819 (2)
  • 9.9606 (2)
  • 10.0394 (2)
  • 10.2362 (4)
  • 10.4724 (2)
  • 10.6299 (2)
  • 10.748 (2)
  • 10.9843 (2)
  • 11.1811 (2)
  • 11.378 (2)
  • 11.6535 (2)
  • 11.7322 (1)
  • 11.7323 (1)
  • 11.8898 (2)
  • 12.1654 (2)
  • 12.1835 (1)
  • 12.2835 (1)
  • 12.4803 (2)
  • 12.6377 (1)
  • 12.6378 (1)
  • 12.6772 (2)
  • 13.0315 (4)
  • 13.189 (2)
  • 13.3858 (1)
  • 13.3859 (1)
  • 13.5433 (2)
  • 13.7795 (2)
  • 14.0945 (2)
  • 14.1339 (2)
  • 14.5276 (2)
  • 14.6063 (2)
  • 15.1575 (2)
  • 15.6693 (2)
  • 15.8267 (1)
  • 15.8268 (1)
  • 16.3779 (1)
  • 16.378 (1)
  • 16.4173 (2)
  • 16.8898 (2)
  • 17.1653 (1)
  • 17.1654 (1)
  • 17.4409 (2)
  • 17.9134 (2)
  • 17.9528 (2)
  • 18.5039 (2)
  • 19.0157 (2)
  • 19.5669 (2)
to