successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Top Drill S™ • Stahl und Gusseisen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (678)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (678)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (678)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (678)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (678)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (678)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (678)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (678)
  • M Stainless Steel (678)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (678)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (678)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (678)
  • K Cast Iron (678)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (678)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (678)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (678)
Select First Choice
  • CN (17)
  • DE (96)
  • IN (13)
Applications
  • Convex Drilling Convex Drilling (9)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (9)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (687)
  • Counterboring Counterboring (9)
  • Countersinking Countersinking (9)
  • Cross Hole Drilling Cross Hole Drilling (1)
  • Drilling Drilling (1356)
  • Flat Bottom Drilling Flat Bottom Drilling (9)
  • Inclined Entry Drilling Inclined Entry Drilling (9)
  • Inclined Exit Drilling Inclined Exit Drilling (10)
  • Pre-Condition Pre-Condition (1356)
  • Stacked Plates Drilling Stacked Plates Drilling (15)
  • X-Offset Drilling X-Offset Drilling (9)
Cutting Diameter
  • 3.0 (6)
  • 3.048 (6)
  • 3.1 (6)
  • 3.175 (6)
  • 3.2 (6)
  • 3.264 (6)
  • 3.3 (6)
  • 3.4 (6)
  • 3.455 (6)
  • 3.5 (6)
  • 3.571 (6)
  • 3.6 (6)
  • 3.658 (6)
  • 3.7 (6)
  • 3.734 (6)
  • 3.8 (6)
  • 3.9 (6)
  • 3.97 (6)
  • 4.0 (6)
  • 4.039 (6)
  • 4.09 (6)
  • 4.1 (6)
  • 4.2 (6)
  • 4.217 (6)
  • 4.3 (6)
  • 4.366 (6)
  • 4.4 (6)
  • 4.5 (6)
  • 4.6 (6)
  • 4.623 (6)
  • 4.7 (6)
  • 4.763 (6)
  • 4.8 (6)
  • 4.852 (6)
  • 4.9 (6)
  • 5.0 (6)
  • 5.1 (6)
  • 5.106 (6)
  • 5.159 (6)
  • 5.2 (6)
  • 5.3 (6)
  • 5.4 (6)
  • 5.41 (6)
  • 5.5 (6)
  • 5.558 (6)
  • 5.6 (6)
  • 5.616 (6)
  • 5.7 (6)
  • 5.8 (6)
  • 5.9 (6)
  • 5.954 (6)
  • 6.0 (6)
  • 6.1 (6)
  • 6.2 (6)
  • 6.3 (6)
  • 6.35 (6)
  • 6.4 (6)
  • 6.5 (6)
  • 6.528 (6)
  • 6.6 (6)
  • 6.63 (6)
  • 6.7 (6)
  • 6.746 (6)
  • 6.8 (6)
  • 6.9 (6)
  • 7.0 (6)
  • 7.1 (6)
  • 7.145 (6)
  • 7.2 (6)
  • 7.3 (6)
  • 7.4 (6)
  • 7.5 (6)
  • 7.541 (6)
  • 7.6 (6)
  • 7.7 (6)
  • 7.8 (6)
  • 7.9 (6)
  • 7.938 (6)
  • 8.0 (6)
  • 8.1 (6)
  • 8.2 (6)
  • 8.3 (6)
  • 8.334 (6)
  • 8.4 (6)
  • 8.433 (6)
  • 8.5 (6)
  • 8.6 (6)
  • 8.7 (6)
  • 8.733 (6)
  • 8.8 (6)
  • 8.9 (6)
  • 9.0 (6)
  • 9.1 (6)
  • 9.129 (6)
  • 9.2 (6)
  • 9.3 (6)
  • 9.347 (6)
  • 9.4 (6)
  • 9.5 (6)
  • 9.525 (6)
  • 9.6 (6)
  • 9.7 (6)
  • 9.8 (6)
  • 9.9 (6)
  • 9.921 (6)
  • 10.0 (6)
  • 10.1 (6)
  • 10.2 (6)
  • 10.3 (6)
  • 10.32 (6)
  • 10.4 (6)
  • 10.5 (6)
  • 10.6 (6)
  • 10.7 (6)
  • 10.716 (6)
  • 10.8 (6)
  • 10.9 (6)
  • 11.0 (6)
  • 11.1 (6)
  • 11.113 (6)
  • 11.2 (6)
  • 11.3 (6)
  • 11.4 (6)
  • 11.5 (6)
  • 11.509 (6)
  • 11.6 (6)
  • 11.7 (6)
  • 11.8 (6)
  • 11.9 (6)
  • 11.908 (6)
  • 12.0 (6)
  • 12.1 (6)
  • 12.2 (6)
  • 12.3 (6)
  • 12.304 (6)
  • 12.4 (6)
  • 12.5 (6)
  • 12.6 (6)
  • 12.7 (6)
  • 12.8 (6)
  • 12.9 (6)
  • 13.0 (6)
  • 13.096 (6)
  • 13.1 (6)
  • 13.2 (6)
  • 13.3 (6)
  • 13.4 (6)
  • 13.5 (6)
  • 13.6 (6)
  • 13.7 (6)
  • 13.8 (6)
  • 13.891 (6)
  • 13.9 (6)
  • 14.0 (6)
  • 14.1 (6)
  • 14.2 (6)
  • 14.288 (6)
  • 14.3 (6)
  • 14.4 (6)
  • 14.5 (6)
  • 14.6 (6)
  • 14.684 (6)
  • 14.7 (6)
  • 14.8 (6)
  • 14.9 (6)
  • 15.0 (6)
  • 15.083 (6)
  • 15.1 (6)
  • 15.2 (6)
  • 15.3 (6)
  • 15.4 (6)
  • 15.479 (6)
  • 15.5 (6)
  • 15.6 (6)
  • 15.7 (6)
  • 15.8 (6)
  • 15.875 (6)
  • 15.9 (6)
  • 16.0 (6)
  • 16.1 (6)
  • 16.2 (6)
  • 16.271 (6)
  • 16.3 (6)
  • 16.4 (6)
  • 16.5 (6)
  • 16.6 (6)
  • 16.67 (6)
  • 16.7 (6)
  • 16.8 (6)
  • 16.9 (6)
  • 17.0 (6)
  • 17.1 (6)
  • 17.2 (6)
  • 17.3 (6)
  • 17.4 (6)
  • 17.463 (6)
  • 17.5 (6)
  • 17.6 (6)
  • 17.7 (6)
  • 17.8 (6)
  • 17.859 (6)
  • 17.9 (6)
  • 18.0 (6)
  • 18.1 (6)
  • 18.2 (6)
  • 18.258 (6)
  • 18.3 (6)
  • 18.4 (6)
  • 18.5 (6)
  • 18.6 (6)
  • 18.654 (6)
  • 18.7 (6)
  • 18.8 (6)
  • 18.9 (6)
  • 19.0 (6)
  • 19.05 (6)
  • 19.1 (6)
  • 19.2 (6)
  • 19.3 (6)
  • 19.4 (6)
  • 19.5 (6)
  • 19.6 (6)
  • 19.7 (6)
  • 19.8 (6)
  • 19.9 (6)
  • 20.0 (6)
to
Cutting Diameter
  • 0.1181 (6)
  • 0.12 (6)
  • 0.122 (6)
  • 0.125 (6)
  • 0.126 (6)
  • 0.1285 (6)
  • 0.1299 (6)
  • 0.1339 (6)
  • 0.136 (6)
  • 0.1378 (6)
  • 0.1406 (6)
  • 0.1417 (6)
  • 0.144 (6)
  • 0.1457 (6)
  • 0.147 (6)
  • 0.1496 (6)
  • 0.1535 (6)
  • 0.1563 (6)
  • 0.1575 (6)
  • 0.159 (6)
  • 0.161 (6)
  • 0.1614 (6)
  • 0.1654 (6)
  • 0.166 (6)
  • 0.1693 (6)
  • 0.1719 (6)
  • 0.1732 (6)
  • 0.1772 (6)
  • 0.1811 (6)
  • 0.182 (6)
  • 0.185 (6)
  • 0.1875 (6)
  • 0.189 (6)
  • 0.191 (6)
  • 0.1929 (6)
  • 0.1969 (6)
  • 0.2008 (6)
  • 0.201 (6)
  • 0.2031 (6)
  • 0.2047 (6)
  • 0.2087 (6)
  • 0.2126 (6)
  • 0.213 (6)
  • 0.2165 (6)
  • 0.2188 (6)
  • 0.2205 (6)
  • 0.2211 (6)
  • 0.2244 (6)
  • 0.2283 (6)
  • 0.2323 (6)
  • 0.2344 (6)
  • 0.2362 (6)
  • 0.2402 (6)
  • 0.2441 (6)
  • 0.248 (6)
  • 0.25 (6)
  • 0.252 (6)
  • 0.2559 (6)
  • 0.257 (6)
  • 0.2598 (6)
  • 0.261 (6)
  • 0.2638 (6)
  • 0.2656 (6)
  • 0.2677 (6)
  • 0.2717 (6)
  • 0.2756 (6)
  • 0.2795 (6)
  • 0.2813 (6)
  • 0.2835 (6)
  • 0.2874 (6)
  • 0.2913 (6)
  • 0.2953 (6)
  • 0.2969 (6)
  • 0.2992 (6)
  • 0.3031 (6)
  • 0.3071 (6)
  • 0.311 (6)
  • 0.3125 (6)
  • 0.315 (6)
  • 0.3189 (6)
  • 0.3228 (6)
  • 0.3268 (6)
  • 0.3281 (6)
  • 0.3307 (6)
  • 0.332 (6)
  • 0.3346 (6)
  • 0.3386 (6)
  • 0.3425 (6)
  • 0.3438 (6)
  • 0.3465 (6)
  • 0.3504 (6)
  • 0.3543 (6)
  • 0.3583 (6)
  • 0.3594 (6)
  • 0.3622 (6)
  • 0.3661 (6)
  • 0.368 (6)
  • 0.3701 (6)
  • 0.374 (6)
  • 0.375 (6)
  • 0.378 (6)
  • 0.3819 (6)
  • 0.3858 (6)
  • 0.3898 (6)
  • 0.3906 (6)
  • 0.3937 (6)
  • 0.3976 (6)
  • 0.4016 (6)
  • 0.4055 (6)
  • 0.4063 (6)
  • 0.4094 (6)
  • 0.4134 (6)
  • 0.4173 (6)
  • 0.4213 (6)
  • 0.4219 (6)
  • 0.4252 (6)
  • 0.4291 (6)
  • 0.4331 (6)
  • 0.437 (6)
  • 0.4375 (6)
  • 0.4409 (6)
  • 0.4449 (6)
  • 0.4488 (6)
  • 0.4528 (6)
  • 0.4531 (6)
  • 0.4567 (6)
  • 0.4606 (6)
  • 0.4646 (6)
  • 0.4685 (6)
  • 0.4688 (6)
  • 0.4724 (6)
  • 0.4764 (6)
  • 0.4803 (6)
  • 0.4843 (6)
  • 0.4844 (6)
  • 0.4882 (6)
  • 0.4921 (6)
  • 0.4961 (6)
  • 0.5 (6)
  • 0.5039 (6)
  • 0.5079 (6)
  • 0.5118 (6)
  • 0.5156 (6)
  • 0.5157 (6)
  • 0.5197 (6)
  • 0.5236 (6)
  • 0.5276 (6)
  • 0.5315 (6)
  • 0.5354 (6)
  • 0.5394 (6)
  • 0.5433 (6)
  • 0.5469 (6)
  • 0.5472 (6)
  • 0.5512 (6)
  • 0.5551 (6)
  • 0.5591 (6)
  • 0.5625 (6)
  • 0.563 (6)
  • 0.5669 (6)
  • 0.5709 (6)
  • 0.5748 (6)
  • 0.5781 (6)
  • 0.5787 (6)
  • 0.5827 (6)
  • 0.5866 (6)
  • 0.5906 (6)
  • 0.5938 (6)
  • 0.5945 (6)
  • 0.5984 (6)
  • 0.6024 (6)
  • 0.6063 (6)
  • 0.6094 (6)
  • 0.6102 (6)
  • 0.6142 (6)
  • 0.6181 (6)
  • 0.622 (6)
  • 0.625 (6)
  • 0.626 (6)
  • 0.6299 (6)
  • 0.6339 (6)
  • 0.6378 (6)
  • 0.6406 (6)
  • 0.6417 (6)
  • 0.6457 (6)
  • 0.6496 (6)
  • 0.6535 (6)
  • 0.6563 (6)
  • 0.6575 (6)
  • 0.6614 (6)
  • 0.6654 (6)
  • 0.6693 (6)
  • 0.6732 (6)
  • 0.6772 (6)
  • 0.6811 (6)
  • 0.685 (6)
  • 0.6875 (6)
  • 0.689 (6)
  • 0.6929 (6)
  • 0.6969 (6)
  • 0.7008 (6)
  • 0.7031 (6)
  • 0.7047 (6)
  • 0.7087 (6)
  • 0.7126 (6)
  • 0.7165 (6)
  • 0.7188 (6)
  • 0.7205 (6)
  • 0.7244 (6)
  • 0.7283 (6)
  • 0.7323 (6)
  • 0.7344 (6)
  • 0.7362 (6)
  • 0.7402 (6)
  • 0.7441 (6)
  • 0.748 (6)
  • 0.75 (6)
  • 0.752 (6)
  • 0.7559 (6)
  • 0.7598 (6)
  • 0.7638 (6)
  • 0.7677 (6)
  • 0.7717 (6)
  • 0.7756 (6)
  • 0.7795 (6)
  • 0.7835 (6)
  • 0.7874 (6)
to
Maximum Hole Depth [L4]
  • 0.5512 (30)
  • 0.6693 (32)
  • 0.7874 (42)
  • 0.9055 (30)
  • 0.9449 (28)
  • 1.1417 (58)
  • 1.2992 (30)
  • 1.378 (96)
  • 1.5748 (50)
  • 1.6142 (32)
  • 1.6929 (100)
  • 1.7717 (50)
  • 1.8898 (42)
  • 1.9291 (54)
  • 2.0079 (48)
  • 2.1654 (46)
  • 2.2047 (50)
  • 2.2441 (28)
  • 2.3622 (46)
  • 2.4016 (26)
  • 2.4803 (50)
  • 2.6772 (54)
  • 2.7953 (48)
  • 3.0315 (46)
  • 3.1102 (50)
  • 3.5827 (46)
  • 3.9764 (50)
  • 4.4488 (48)
  • 4.8819 (46)
to
Maximum Hole Depth [L4]
  • 14.0 (30)
  • 17.0 (32)
  • 20.0 (42)
  • 23.0 (30)
  • 24.0 (28)
  • 29.0 (58)
  • 33.0 (30)
  • 35.0 (96)
  • 40.0 (50)
  • 41.0 (32)
  • 43.0 (100)
  • 45.0 (50)
  • 48.0 (42)
  • 49.0 (54)
  • 51.0 (48)
  • 55.0 (46)
  • 56.0 (50)
  • 57.0 (28)
  • 60.0 (46)
  • 61.0 (26)
  • 63.0 (50)
  • 68.0 (54)
  • 71.0 (48)
  • 77.0 (46)
  • 79.0 (50)
  • 91.0 (46)
  • 101.0 (50)
  • 113.0 (48)
  • 124.0 (46)
to
Reach
  • 20.0 (30)
  • 24.0 (32)
  • 28.0 (72)
  • 34.0 (28)
  • 36.0 (32)
  • 40.0 (30)
  • 41.0 (26)
  • 44.0 (42)
  • 47.0 (54)
  • 49.0 (32)
  • 53.0 (54)
  • 55.0 (50)
  • 56.0 (42)
  • 60.0 (46)
  • 61.0 (54)
  • 65.0 (50)
  • 67.0 (28)
  • 71.0 (50)
  • 72.0 (26)
  • 73.0 (48)
  • 77.0 (46)
  • 79.0 (46)
  • 80.0 (54)
  • 83.0 (50)
  • 93.0 (48)
  • 94.0 (50)
  • 101.0 (46)
  • 108.0 (46)
  • 121.0 (50)
  • 135.0 (48)
  • 148.0 (46)
to
Reach
  • 0.7874 (30)
  • 0.9449 (32)
  • 1.1024 (72)
  • 1.3386 (28)
  • 1.4173 (32)
  • 1.5748 (30)
  • 1.6142 (26)
  • 1.7323 (42)
  • 1.8504 (54)
  • 1.9291 (32)
  • 2.0866 (54)
  • 2.1654 (50)
  • 2.2047 (42)
  • 2.3622 (46)
  • 2.4016 (54)
  • 2.5591 (50)
  • 2.6378 (28)
  • 2.7953 (50)
  • 2.8346 (26)
  • 2.874 (48)
  • 3.0315 (46)
  • 3.1102 (46)
  • 3.1496 (54)
  • 3.2677 (50)
  • 3.6614 (48)
  • 3.7008 (50)
  • 3.9764 (46)
  • 4.252 (46)
  • 4.7638 (50)
  • 5.315 (48)
  • 5.8268 (46)
to
Connection Style
  • Straight-Cylindrical (1356)
Number of Flutes
  • 2 (1356)
application
Coating
  • AlCrN (678)
  • TiAlN (678)
Grade Of Cutting Tool
  • WK15PD (678)
  • WP20PD (678)
Hand Of Tool
  • R (1356)
Drill Type
  • 81-01 (1356)
frontEnd
Point Angle
  • 140.0 (1356)
to
backEnd
Connection Type
  • CYLINDRICAL (1356)
Back-End Diameter
  • 0.2362 (312)
  • 0.315 (162)
  • 0.3937 (162)
  • 0.4724 (150)
  • 0.5512 (138)
  • 0.6299 (150)
  • 0.7087 (144)
  • 0.7874 (138)
to
Back-End Diameter
  • 6.0 (312)
  • 8.0 (162)
  • 10.0 (162)