Features and benefits
- Modularer Schaftfräser zum Schruppen in Aluminium.
- Über Mitte schneidend.
- Für Dünnwandanwendungen.
- Abstreifer-Facette, spezieller Endspalt und Nutengeometrie für beste Oberflächengüten.
Maschinenseite
loading...
Werkstückseite
loading...
End Mill Tolerances | |
D1 | tolerance e8 |
|
-0,032/-0,059 |
|
-0,040/-0,073 |
|
-0,050/-0,089 |
MaxiMet • ABDF • Planfase
Material
|
<="" td=""> | <="" td=""> | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||
A | B | adapter reach | D1
|
|||||||||||||||
K600 | K600 | K600 | ||||||||||||||||
Cutting Speed
|
Cutting Speed
|
Cutting Speed
|
||||||||||||||||
ap | ae | ap | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | |||||
N | 1 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 2000 | 400 | – | 1200 | 300 | – | 1200 | fz | 0,077 | 0,092 | 0,122 | 0,153 |
2 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 1500 | 400 | – | 900 | 300 | – | 900 | fz | 0,069 | 0,083 | 0,110 | 0,138 | |
3 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 1500 | 400 | – | 900 | 300 | – | 900 | fz | 0,054 | 0,064 | 0,086 | 0,107 | |
4 | 1,5 x D | 0,3 x D | 1,0 x D | 400 | – | 750 | 320 | – | 450 | 240 | – | 450 | fz | 0,054 | 0,064 | 0,086 | 0,107 | |
5 | 1,5 x D | 0,3 x D | 1,0 x D | 250 | – | 1000 | 200 | – | 600 | 150 | – | 600 | fz | 0,069 | 0,083 | 0,110 | 0,138 |
MaxiMet • ABDE • Planfase • Ungleiche Schneidreihenteilung
<="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||||
Side Milling (A) and Slotting (B) | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||
A | B | adapter reach | D1
|
|||||||||||||||
K600 | K600 | K600 | ||||||||||||||||
Cutting Speed
|
Cutting Speed
|
Cutting Speed
|
||||||||||||||||
Material
|
ap | ae | ap | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | ||||
N | 1 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 2000 | 400 | – | 1200 | 300 | – | 1200 | fz | 0,077 | 0,092 | 0,122 | 0,153 |
2 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 1500 | 400 | – | 900 | 300 | – | 900 | fz | 0,069 | 0,083 | 0,110 | 0,138 | |
3 | 1,5 x D | 0,3 x D | 1,0 x D | 500 | – | 1500 | 400 | – | 900 | 300 | – | 900 | fz | 0,054 | 0,064 | 0,086 | 0,107 | |
4 | 1,5 x D | 0,3 x D | 1,0 x D | 400 | – | 750 | 320 | – | 450 | 240 | – | 450 | fz | 0,054 | 0,064 | 0,086 | 0,107 | |
5 | 1,5 x D | 0,3 x D | 1,0 x D | 250 | – | 1000 | 200 | – | 600 | 150 | – | 600 | fz | 0,069 | 0,083 | 0,110 | 0,138 |