Country

Sprache

Maßeinheit

Kontaktieren Sie unser Vertriebsteam und Sie erfahren, wie Sie WIDIA Werkzeuge beziehen können

Listenpreis:

Rabatt: %

Listenpreis:

$88.47 /each

Your price::

Qty

Configure

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

SDS

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Name: ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch
SKU: 6853360
Rating: 0 (0 reviews)

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Metric

Inch

SAP-Materialnummer	6853360
ISO Katalognummer	3A09E13006RET
ANSI Katalognummer	3A09E13006RET
Sorte	UNCOATED
Aufnahmeart Maschinenseite	Straight-Cylindrical
[D1] Effektiver Schneidendurchmesser	12.7 mm
[D1] Effektiver Schneidendurchmesser	.5 in
[D] Adapter/Schaft/Bohrungsdurchmesser	12.7 mm
[D] Adapter/Schaft/Bohrungsdurchmesser	.5 in
[AP1MAX] 1. maximale Schnitttiefe	31.75 mm
[AP1MAX] 1. maximale Schnitttiefe	1.25 in
[L] Gesamtlänge	88.9 mm
[L] Gesamtlänge	3.5 in
[Re] Eckenradius	0.762 mm
[Re] Eckenradius	.03 in
[Z] Anzahl der Spannuten	3

Alle Produktvarianten anzeigen

Uses and application

Trochoidal Milling
Drilling
Spiralförmiges Interpolieren
Tauchfräsen
Schräg-Eintauchfräsen Ins Volle
Nutenfräsen: Ebene Stirnfläche
Umfangfräsen/Schulterfräsen: Ebene Stirnfläche

Werkstoffe

N NE-Metalle

Maschinenseite

Material Group		Helical Interpolation / Ramping 0° - 15°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	1.25 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	1.25 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	1.25 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	1.25 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		Helical Interpolation / Ramping 15° - 30°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	4800	IPT	.0006	.0013	.0016	.0019	.0026	.0032	.0039	.0045	.0052	.0058	.0065	.0081
	2	1.25 x D1	1500	1800	3600	IPT	.0006	.0012	.0014	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073
	3	1.25 x D1	1500	1800	3600	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	4	1.25 x D1	1200	1350	1800	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	5	1.25 x D1	750	1200	2400	IPT	.0006	.0012	.0015	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073

Material Group		Helical Interpolation / Ramping 30° - 45°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1260	1500	2400	IPT	.0005	.0010	.0013	.0016	.0021	.0026	.0031	.0036	.0042	.0047	.0052	.0065
	2	1.25 x D1	1260	1500	2400	IPT	.0005	.0009	.0011	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058
	3	1.25 x D1	1260	1500	2400	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	4	1.25 x D1	1020	1140	1350	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	5	1.25 x D1	630	1020	1800	IPT	.0005	.0009	.0012	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 2-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1.5 x D		Required	360	780	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	2	1.5 x D		Required	360	750	840	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	3	1.5 x D		Required	300	600	780	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	4	1 x D		Required	180	450	780	IPR	.0024	.0031	.0039	.0047	.0055	.0063	.0079	.0083	.0087	.0093	.0098	.0110
	5	1.5 x D		Required	180	600	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 3-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1,5 x D		Required	360	780	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	2	1,5 x D		Required	360	750	840	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	3	1,5 x D		Required	300	600	780	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	4	1 x D		Required	180	450	780	IPR	.0017	.0022	.0028	.0033	.0039	.0044	.0055	.0058	.0061	.0065	.0069	.0077
	5	1,5 x D		Required	180	600	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Katalog	Grade

Willkommen

Bestätigen Sie bitte Ihre Präferenzen

Einstellungen aktualisieren

Produktvorschläge

Product Family suggestions

Experten Chat

Vertriebsteam kontaktieren

Experten Chat

Vertriebsteam kontaktieren

Lösung bearbeiten

Lösung hinzufügen

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Uses and application

Werkstoffe

Maschinenseite

Werkstückseite

Produktvorschläge

Product Family suggestions

Experten Chat

Vertriebsteam kontaktieren

Notifications

Experten Chat

Vertriebsteam kontaktieren

Sending to SolidCAM in progress...

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Uses and application

Werkstoffe

Maschinenseite

Werkstückseite

The following files are available