successfully added to cart
View Cart

Notifications

Mark all as read

Universal-Vollhartmetall-Schaftfräser • Schruppen und Schlichten

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1537)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1537)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1348)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1348)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (461)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (461)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (461)
  • K Cast Iron (1348)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1348)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1348)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (470)
  • N Non-Ferrous Materials (877)
    • N1
      Wrought Aluminum
      (736)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (736)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (455)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (522)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (810)
    • N6
      Carbon, Graphite Composites, CFRP
      (455)
    • N7
      MMC's
      (454)
  • S High-Temp Alloys (461)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (461)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (461)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (461)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (461)
  • H Hardened Materials (461)
    • H1
      Hardened Materials 44-48 HRC
      (461)
    • H2
      Hardened Materials 48-55 HRC
      (456)
    • H3
      Hardened Materials 56-60 HRC
      (449)
    • H4
      Hardened Materials >60 HRC
      (449)
Select All Star
  • CN (228)
  • DE (311)
  • GB (133)
  • IN (148)
  • SG (206)
  • US (332)
Applications
Applications
  • Face Milling Face Milling (1173)
  • Pocket Pocket (1476)
  • Pocket Helical Pocket Helical (1476)
  • Pocket Milling Pocket Milling (1475)
  • Pocket Plunge Milling Pocket Plunge Milling (263)
  • Profile Milling Profile Milling (270)
  • Ramping Ramping (1520)
  • Shoulder Ball Nose Shoulder Ball Nose (270)
  • Shoulder Milling Shoulder Milling (1476)
  • Shoulder Roughing Shoulder Roughing (959)
  • Shoulder Square End Shoulder Square End (1249)
  • Slot Ball Nose Slot Ball Nose (270)
  • Slot Milling Slot Milling (886)
  • Slot Square End Slot Square End (665)
Cutting Diameter
Cutting Diameter
  • 0.016 in (2)
  • 0.031 in (8)
  • 0.039 in (7)
  • 0.047 in (2)
  • 0.06 in (7)
  • 0.063 in (17)
  • 0.072 in (1)
  • 0.078 in (7)
  • 0.079 in (26)
  • 0.094 in (20)
  • 0.098 in (16)
  • 0.109 in (5)
  • 0.119 in (53)
  • 0.125 in (38)
  • 0.138 in (13)
  • 0.142 in (3)
  • 0.156 in (10)
  • 0.157 in (73)
  • 0.173 in (2)
  • 0.177 in (20)
  • 0.187 in (4)
  • 0.188 in (34)
  • 0.197 in (67)
  • 0.203 in (2)
  • 0.217 in (14)
  • 0.219 in (8)
  • 0.234 in (2)
  • 0.237 in (88)
  • 0.25 in (45)
  • 0.256 in (2)
  • 0.266 in (2)
  • 0.276 in (25)
  • 0.281 in (5)
  • 0.295 in (2)
  • 0.297 in (1)
  • 0.313 in (35)
  • 0.315 in (81)
  • 0.328 in (1)
  • 0.345 in (4)
  • 0.354 in (15)
  • 0.359 in (1)
  • 0.375 in (45)
  • 0.391 in (1)
  • 0.394 in (81)
  • 0.406 in (3)
  • 0.422 in (1)
  • 0.433 in (2)
  • 0.438 in (17)
  • 0.453 in (1)
  • 0.47 in (3)
  • 0.473 in (102)
  • 0.484 in (1)
  • 0.5 in (51)
  • 0.551 in (62)
  • 0.564 in (19)
  • 0.591 in (2)
  • 0.625 in (49)
  • 0.63 in (87)
  • 0.687 in (2)
  • 0.689 in (1)
  • 0.709 in (43)
  • 0.75 in (53)
  • 0.787 in (74)
  • 0.814 in (1)
  • 0.875 in (27)
  • 1.0 in (40)
  • 1.25 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.4 mm (2)
  • 0.8 mm (8)
  • 1.0 mm (7)
  • 1.201 mm (2)
  • 1.5 mm (7)
  • 1.6 mm (17)
  • 1.8 mm (1)
  • 1.975 mm (7)
  • 2.0 mm (26)
  • 2.375 mm (20)
  • 2.5 mm (16)
  • 2.776 mm (5)
  • 3.0 mm (53)
  • 3.176 mm (38)
  • 3.5 mm (13)
  • 3.575 mm (3)
  • 3.975 mm (10)
  • 4.0 mm (73)
  • 4.375 mm (2)
  • 4.5 mm (20)
  • 4.75 mm (4)
  • 4.775 mm (34)
  • 5.0 mm (67)
  • 5.15 mm (2)
  • 5.5 mm (14)
  • 5.551 mm (8)
  • 5.95 mm (2)
  • 6.0 mm (88)
  • 6.351 mm (45)
  • 6.5 mm (2)
  • 6.75 mm (2)
  • 7.0 mm (25)
  • 7.15 mm (5)
  • 7.5 mm (2)
  • 7.551 mm (1)
  • 7.95 mm (35)
  • 8.0 mm (81)
  • 8.326 mm (1)
  • 8.725 mm (4)
  • 9.0 mm (15)
  • 9.125 mm (1)
  • 9.525 mm (45)
  • 9.925 mm (1)
  • 10.0 mm (81)
  • 10.326 mm (3)
  • 10.726 mm (1)
  • 11.0 mm (2)
  • 11.125 mm (17)
  • 11.5 mm (1)
  • 11.9 mm (3)
  • 12.0 mm (102)
  • 12.3 mm (1)
  • 12.701 mm (51)
  • 14.0 mm (62)
  • 14.3 mm (19)
  • 15.0 mm (2)
  • 15.875 mm (49)
  • 16.0 mm (87)
  • 17.45 mm (2)
  • 17.475 mm (1)
  • 18.0 mm (43)
  • 19.05 mm (53)
  • 20.0 mm (74)
  • 20.651 mm (1)
  • 22.225 mm (27)
  • 25.401 mm (40)
  • 31.75 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.8 mm (2)
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 1.975 mm (8)
  • 2.0 mm (2)
  • 2.776 mm (3)
  • 3.0 mm (8)
  • 3.176 mm (7)
  • 4.0 mm (30)
  • 4.75 mm (17)
  • 4.775 mm (1)
  • 5.0 mm (24)
  • 6.0 mm (14)
  • 6.301 mm (14)
  • 6.351 mm (8)
  • 7.0 mm (43)
  • 7.95 mm (8)
  • 8.0 mm (49)
  • 9.0 mm (9)
  • 9.5 mm (10)
  • 9.525 mm (18)
  • 10.0 mm (41)
  • 11.0 mm (31)
  • 11.101 mm (2)
  • 12.0 mm (23)
  • 12.701 mm (36)
  • 13.0 mm (36)
  • 14.0 mm (26)
  • 14.3 mm (12)
  • 15.0 mm (6)
  • 15.875 mm (43)
  • 16.0 mm (51)
  • 18.0 mm (12)
  • 19.0 mm (51)
  • 19.05 mm (56)
  • 20.0 mm (43)
  • 20.651 mm (20)
  • 22.0 mm (57)
  • 22.225 mm (5)
  • 24.0 mm (5)
  • 25.0 mm (29)
  • 25.401 mm (78)
  • 26.0 mm (54)
  • 28.0 mm (29)
  • 28.576 mm (26)
  • 30.0 mm (6)
  • 31.0 mm (12)
  • 31.75 mm (33)
  • 32.0 mm (79)
  • 34.926 mm (3)
  • 38.0 mm (41)
  • 38.1 mm (80)
  • 40.0 mm (4)
  • 41.0 mm (8)
  • 41.276 mm (5)
  • 44.45 mm (5)
  • 45.0 mm (29)
  • 46.0 mm (1)
  • 50.0 mm (7)
  • 50.801 mm (19)
  • 56.0 mm (23)
  • 57.151 mm (35)
  • 60.0 mm (2)
  • 64.0 mm (5)
  • 65.0 mm (1)
  • 75.0 mm (44)
  • 76.2 mm (30)
  • 101.601 mm (15)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.031 in (2)
  • 0.039 in (2)
  • 0.06 in (2)
  • 0.078 in (8)
  • 0.079 in (2)
  • 0.109 in (3)
  • 0.119 in (8)
  • 0.125 in (7)
  • 0.157 in (30)
  • 0.187 in (17)
  • 0.188 in (1)
  • 0.197 in (24)
  • 0.237 in (14)
  • 0.248 in (14)
  • 0.25 in (8)
  • 0.276 in (43)
  • 0.313 in (8)
  • 0.315 in (49)
  • 0.354 in (9)
  • 0.374 in (10)
  • 0.375 in (18)
  • 0.394 in (41)
  • 0.433 in (31)
  • 0.437 in (2)
  • 0.473 in (23)
  • 0.5 in (36)
  • 0.512 in (36)
  • 0.551 in (26)
  • 0.564 in (12)
  • 0.591 in (6)
  • 0.625 in (43)
  • 0.63 in (51)
  • 0.709 in (12)
  • 0.748 in (51)
  • 0.75 in (56)
  • 0.787 in (43)
  • 0.814 in (20)
  • 0.866 in (57)
  • 0.875 in (5)
  • 0.946 in (5)
  • 0.984 in (29)
  • 1.0 in (78)
  • 1.024 in (54)
  • 1.102 in (29)
  • 1.125 in (26)
  • 1.181 in (6)
  • 1.22 in (12)
  • 1.25 in (33)
  • 1.26 in (79)
  • 1.375 in (3)
  • 1.496 in (41)
  • 1.5 in (80)
  • 1.575 in (4)
  • 1.614 in (8)
  • 1.625 in (5)
  • 1.75 in (5)
  • 1.772 in (29)
  • 1.811 in (1)
  • 1.969 in (7)
  • 2.0 in (19)
  • 2.205 in (23)
  • 2.25 in (35)
  • 2.362 in (2)
  • 2.52 in (5)
  • 2.559 in (1)
  • 2.953 in (44)
  • 3.0 in (30)
  • 4.0 in (15)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.091 in (1)
  • 0.098 in (2)
  • 0.128 in (2)
  • 0.13 in (1)
  • 0.15 in (2)
  • 0.157 in (6)
  • 0.176 in (3)
  • 0.177 in (1)
  • 0.197 in (6)
  • 0.202 in (2)
  • 0.205 in (1)
  • 0.208 in (2)
  • 0.217 in (1)
  • 0.218 in (2)
  • 0.228 in (4)
  • 0.23 in (2)
  • 0.247 in (2)
  • 0.255 in (1)
  • 0.267 in (1)
  • 0.272 in (8)
  • 0.276 in (8)
  • 0.28 in (1)
  • 0.286 in (1)
  • 0.288 in (1)
  • 0.289 in (2)
  • 0.291 in (7)
  • 0.303 in (1)
  • 0.307 in (3)
  • 0.308 in (2)
  • 0.315 in (11)
  • 0.341 in (4)
  • 0.343 in (2)
  • 0.354 in (3)
  • 0.355 in (2)
  • 0.37 in (1)
  • 0.371 in (2)
  • 0.372 in (1)
  • 0.374 in (3)
  • 0.394 in (3)
  • 0.397 in (5)
  • 0.398 in (1)
  • 0.433 in (20)
  • 0.473 in (1)
  • 0.484 in (1)
  • 0.492 in (3)
  • 0.494 in (4)
  • 0.497 in (2)
  • 0.5 in (1)
  • 0.503 in (3)
  • 0.504 in (2)
  • 0.508 in (1)
  • 0.512 in (10)
  • 0.517 in (1)
  • 0.531 in (2)
  • 0.539 in (5)
  • 0.551 in (1)
  • 0.555 in (2)
  • 0.556 in (2)
  • 0.559 in (4)
  • 0.576 in (3)
  • 0.577 in (1)
  • 0.584 in (3)
  • 0.591 in (6)
  • 0.601 in (2)
  • 0.602 in (2)
  • 0.614 in (3)
  • 0.621 in (3)
  • 0.622 in (4)
  • 0.63 in (7)
  • 0.657 in (2)
  • 0.661 in (1)
  • 0.674 in (1)
  • 0.694 in (4)
  • 0.695 in (2)
  • 0.709 in (3)
  • 0.72 in (1)
  • 0.721 in (2)
  • 0.732 in (6)
  • 0.733 in (1)
  • 0.734 in (1)
  • 0.736 in (1)
  • 0.74 in (2)
  • 0.744 in (1)
  • 0.745 in (1)
  • 0.748 in (7)
  • 0.752 in (1)
  • 0.76 in (2)
  • 0.77 in (1)
  • 0.771 in (1)
  • 0.787 in (5)
  • 0.805 in (3)
  • 0.809 in (2)
  • 0.811 in (2)
  • 0.839 in (2)
  • 0.843 in (1)
  • 0.846 in (1)
  • 0.848 in (1)
  • 0.85 in (1)
  • 0.866 in (8)
  • 0.89 in (3)
  • 0.891 in (1)
  • 0.894 in (1)
  • 0.909 in (1)
  • 0.929 in (4)
  • 0.93 in (5)
  • 0.937 in (1)
  • 0.942 in (2)
  • 0.946 in (2)
  • 0.95 in (2)
  • 0.958 in (2)
  • 0.968 in (1)
  • 0.969 in (1)
  • 0.974 in (1)
  • 0.976 in (1)
  • 0.984 in (6)
  • 1.016 in (1)
  • 1.024 in (11)
  • 1.055 in (2)
  • 1.102 in (4)
  • 1.127 in (3)
  • 1.181 in (1)
  • 1.205 in (1)
  • 1.22 in (2)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.233 in (1)
  • 1.244 in (1)
  • 1.26 in (15)
  • 1.266 in (1)
  • 1.278 in (1)
  • 1.283 in (1)
  • 1.286 in (1)
  • 1.319 in (1)
  • 1.33 in (1)
  • 1.37 in (1)
  • 1.447 in (1)
  • 1.449 in (1)
  • 1.496 in (11)
  • 1.539 in (2)
  • 1.6 in (2)
  • 1.614 in (2)
  • 1.772 in (5)
  • 1.803 in (1)
  • 1.969 in (2)
  • 1.979 in (1)
  • 2.13 in (1)
  • 2.132 in (1)
  • 2.205 in (5)
  • 2.362 in (1)
  • 2.953 in (11)
Reach Min to Reach Max
Reach
Reach
  • 2.301 mm (1)
  • 2.5 mm (2)
  • 3.25 mm (2)
  • 3.301 mm (1)
  • 3.801 mm (2)
  • 4.0 mm (6)
  • 4.476 mm (3)
  • 4.5 mm (1)
  • 5.0 mm (6)
  • 5.125 mm (2)
  • 5.176 mm (1)
  • 5.25 mm (2)
  • 5.5 mm (1)
  • 5.525 mm (2)
  • 5.801 mm (4)
  • 5.851 mm (2)
  • 6.275 mm (2)
  • 6.476 mm (1)
  • 6.775 mm (1)
  • 6.9 mm (8)
  • 7.0 mm (8)
  • 7.101 mm (1)
  • 7.25 mm (1)
  • 7.301 mm (1)
  • 7.351 mm (2)
  • 7.4 mm (7)
  • 7.7 mm (1)
  • 7.801 mm (3)
  • 7.825 mm (2)
  • 8.0 mm (11)
  • 8.65 mm (4)
  • 8.701 mm (2)
  • 9.0 mm (3)
  • 9.025 mm (2)
  • 9.4 mm (1)
  • 9.425 mm (2)
  • 9.451 mm (1)
  • 9.5 mm (3)
  • 10.0 mm (3)
  • 10.076 mm (5)
  • 10.101 mm (1)
  • 11.0 mm (20)
  • 12.0 mm (1)
  • 12.3 mm (1)
  • 12.5 mm (3)
  • 12.55 mm (4)
  • 12.625 mm (2)
  • 12.701 mm (1)
  • 12.775 mm (3)
  • 12.8 mm (2)
  • 12.9 mm (1)
  • 13.0 mm (10)
  • 13.125 mm (1)
  • 13.476 mm (2)
  • 13.701 mm (5)
  • 14.0 mm (1)
  • 14.101 mm (2)
  • 14.125 mm (2)
  • 14.201 mm (4)
  • 14.601 mm (3)
  • 14.625 mm (1)
  • 14.826 mm (3)
  • 15.0 mm (6)
  • 15.275 mm (2)
  • 15.3 mm (2)
  • 15.601 mm (3)
  • 15.775 mm (3)
  • 15.8 mm (4)
  • 16.0 mm (7)
  • 16.7 mm (2)
  • 16.8 mm (1)
  • 17.125 mm (1)
  • 17.6 mm (4)
  • 17.625 mm (2)
  • 18.0 mm (3)
  • 18.3 mm (1)
  • 18.325 mm (2)
  • 18.6 mm (6)
  • 18.625 mm (1)
  • 18.651 mm (1)
  • 18.7 mm (1)
  • 18.8 mm (2)
  • 18.901 mm (1)
  • 18.925 mm (1)
  • 19.0 mm (7)
  • 19.1 mm (1)
  • 19.3 mm (2)
  • 19.55 mm (1)
  • 19.576 mm (1)
  • 20.0 mm (5)
  • 20.451 mm (3)
  • 20.55 mm (2)
  • 20.6 mm (2)
  • 21.3 mm (2)
  • 21.401 mm (1)
  • 21.5 mm (1)
  • 21.55 mm (1)
  • 21.6 mm (1)
  • 22.0 mm (8)
  • 22.6 mm (3)
  • 22.625 mm (1)
  • 22.701 mm (1)
  • 23.1 mm (1)
  • 23.6 mm (4)
  • 23.625 mm (5)
  • 23.8 mm (1)
  • 23.901 mm (2)
  • 24.0 mm (2)
  • 24.1 mm (2)
  • 24.3 mm (2)
  • 24.576 mm (1)
  • 24.6 mm (1)
  • 24.75 mm (1)
  • 24.8 mm (1)
  • 25.0 mm (6)
  • 25.776 mm (1)
  • 26.0 mm (11)
  • 26.8 mm (2)
  • 28.0 mm (4)
  • 28.6 mm (3)
  • 30.0 mm (1)
  • 30.6 mm (1)
  • 31.0 mm (2)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 31.326 mm (1)
  • 31.6 mm (1)
  • 32.0 mm (15)
  • 32.15 mm (1)
  • 32.426 mm (1)
  • 32.6 mm (1)
  • 32.676 mm (1)
  • 33.5 mm (1)
  • 33.775 mm (1)
  • 34.801 mm (1)
  • 36.75 mm (1)
  • 36.801 mm (1)
  • 38.0 mm (11)
  • 39.1 mm (2)
  • 40.651 mm (2)
  • 41.0 mm (2)
  • 45.0 mm (5)
  • 45.801 mm (1)
  • 50.0 mm (2)
  • 50.276 mm (1)
  • 54.1 mm (1)
  • 54.125 mm (1)
  • 56.0 mm (5)
  • 60.0 mm (1)
  • 75.0 mm (11)
Reach Min to Reach Max