successfully added to cart
View Cart

H/P Vollhartmetall • Schlichten

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (106)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (106)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (106)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (106)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (106)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (105)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (91)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (91)
  • M Stainless Steel (106)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (106)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (105)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (91)
  • K Cast Iron (106)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (106)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (105)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (91)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
  • S High-Temp Alloys (91)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (91)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (91)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (91)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (91)
  • H Hardened Materials (92)
    • H1
      Hardened Materials 44-48 HRC
      (92)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • CN (9)
  • DE (18)
  • GB (8)
  • US (32)
Applications
Applications
  • Pocket Pocket (57)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (68)
  • Pocket Plunge Milling Pocket Plunge Milling (11)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (45)
  • Shoulder Ball Nose Shoulder Ball Nose (14)
  • Shoulder Milling Shoulder Milling (89)
  • Shoulder Roughing Shoulder Roughing (24)
  • Shoulder Square End Shoulder Square End (99)
  • Slot Ball Nose Slot Ball Nose (14)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (46)
Cutting Diameter
Cutting Diameter
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 2.0 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (7)
  • 3.175 mm (2)
  • 3.5 mm (2)
  • 4.0 mm (8)
  • 4.5 mm (1)
  • 4.763 mm (2)
  • 5.0 mm (5)
  • 6.0 mm (10)
  • 6.35 mm (8)
  • 7.938 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.7 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.4 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.0394 in (2)
  • 0.0591 in (2)
  • 0.0787 in (2)
  • 0.079 in (1)
  • 0.0984 in (3)
  • 0.118 in (4)
  • 0.1181 in (3)
  • 0.125 in (2)
  • 0.1378 in (2)
  • 0.157 in (4)
  • 0.1575 in (4)
  • 0.1772 in (1)
  • 0.1875 in (2)
  • 0.1969 in (3)
  • 0.197 in (2)
  • 0.236 in (4)
  • 0.2362 in (6)
  • 0.25 in (8)
  • 0.3125 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.3937 in (6)
  • 0.394 in (4)
  • 0.472 in (5)
  • 0.4724 in (6)
  • 0.5 in (8)
  • 0.551 in (1)
  • 0.5512 in (2)
  • 0.625 in (3)
  • 0.6299 in (5)
  • 0.63 in (3)
  • 0.7087 in (1)
  • 0.75 in (9)
  • 0.7874 in (4)
  • 0.9843 in (1)
  • 1.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.118 in (1)
  • 0.1181 in (7)
  • 0.157 in (2)
  • 0.1575 in (2)
  • 0.1969 in (2)
  • 0.197 in (2)
  • 0.236 in (1)
  • 0.2756 in (2)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.3543 in (1)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.3937 in (1)
  • 0.394 in (2)
  • 0.433 in (2)
  • 0.4331 in (2)
  • 0.4375 in (1)
  • 0.472 in (1)
  • 0.4724 in (5)
  • 0.5 in (5)
  • 0.5118 in (3)
  • 0.512 in (1)
  • 0.5512 in (4)
  • 0.625 in (4)
  • 0.6299 in (3)
  • 0.63 in (1)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.7874 in (2)
  • 0.8125 in (1)
  • 0.866 in (4)
  • 0.8661 in (5)
  • 0.875 in (3)
  • 0.984 in (1)
  • 0.9843 in (2)
  • 1.0 in (2)
  • 1.0236 in (5)
  • 1.024 in (3)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.2598 in (5)
  • 1.26 in (2)
  • 1.4961 in (3)
  • 1.5 in (7)
  • 1.7717 in (1)
  • 2.0 in (2)
  • 2.25 in (5)
  • 3.0 in (2)
  • 4.0 in (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 3.0 mm (8)
  • 4.0 mm (4)
  • 5.0 mm (4)
  • 6.0 mm (1)
  • 7.0 mm (5)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (4)
  • 11.113 mm (1)
  • 12.0 mm (6)
  • 12.7 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 20.638 mm (1)
  • 22.0 mm (9)
  • 22.225 mm (3)
  • 25.0 mm (3)
  • 25.4 mm (2)
  • 26.0 mm (8)
  • 28.575 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 45.0 mm (1)
  • 50.8 mm (2)
  • 57.15 mm (5)
  • 76.2 mm (2)
  • 101.6 mm (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 3.0 mm (7)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (1)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (2)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (3)
  • 11.113 mm (1)
  • 12.0 mm (5)
  • 12.7 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (1)
  • 20.638 mm (1)
  • 22.0 mm (7)
  • 22.225 mm (3)
  • 25.0 mm (1)
  • 25.4 mm (2)
  • 26.0 mm (8)
  • 28.575 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (2)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (2)
  • 50.8 mm (2)
  • 57.15 mm (5)
  • 60.0 mm (2)
  • 76.2 mm (2)
  • 101.6 mm (1)
Reach Min to Reach Max
Reach
Reach
  • 0.118 in (1)
  • 0.1181 in (6)
  • 0.157 in (2)
  • 0.1575 in (1)
  • 0.1969 in (1)
  • 0.197 in (2)
  • 0.236 in (1)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.3937 in (1)
  • 0.394 in (2)
  • 0.433 in (2)
  • 0.4331 in (1)
  • 0.4375 in (1)
  • 0.472 in (1)
  • 0.4724 in (4)
  • 0.5 in (5)
  • 0.5118 in (3)
  • 0.512 in (1)
  • 0.5512 in (4)
  • 0.625 in (4)
  • 0.6299 in (2)
  • 0.63 in (1)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.7874 in (1)
  • 0.8125 in (1)
  • 0.866 in (3)
  • 0.8661 in (4)
  • 0.875 in (3)
  • 0.9843 in (1)
  • 1.0 in (2)
  • 1.0236 in (5)
  • 1.024 in (3)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.2598 in (4)
  • 1.26 in (1)
  • 1.378 in (2)
  • 1.4961 in (3)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.7717 in (1)
  • 1.9685 in (1)
  • 1.969 in (1)
  • 2.0 in (2)
  • 2.25 in (5)
  • 2.362 in (1)
  • 2.3622 in (1)
  • 3.0 in (2)
  • 4.0 in (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (135)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (82)
  • Weldon (54)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (14)
  • CHAMFER (8)
  • RADIUS (12)
  • SQUARE END (102)
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.25 mm (2)
  • 0.254 mm (2)
  • 0.45 mm (4)
  • 0.457 mm (2)
  • 0.5 mm (1)
  • 0.75 mm (1)
  • 0.762 mm (2)
  • 1.0 mm (1)
  • 1.5 mm (1)
  • 2.0 mm (1)
  • 2.5 mm (1)
  • 3.0 mm (1)
  • 4.0 mm (1)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.01 in (4)
  • 0.018 in (6)
  • 0.0197 in (1)
  • 0.0295 in (1)
  • 0.03 in (2)
  • 0.0394 in (1)
  • 0.0591 in (1)
  • 0.0787 in (1)
  • 0.0984 in (1)
  • 0.1181 in (1)
  • 0.1575 in (1)
  • 0.1969 in (1)
  • 0.197 in (1)
  • 0.236 in (1)
  • 0.2362 in (1)
  • 0.315 in (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (128)
  • 0.0039 in (5)
  • 0.0079 in (1)
  • 0.0118 in (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (128)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.3 mm (2)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (6)
  • TICN-CT (5)
  • UNCOATED (4)
  • WP15PE (85)
Rough Finish
Rough Finish
  • F (109)
  • FR (27)
frontEnd
Neck Diameter
Neck Diameter
  • 5.64 mm (1)
  • 7.52 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 11.28 mm (1)
  • 11.5 mm (1)
  • 15.04 mm (1)
  • 15.5 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.222 in (1)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (1)
  • 0.444 in (1)
  • 0.4528 in (1)
  • 0.592 in (1)
  • 0.6102 in (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 0.125 in (2)
  • 0.1575 in (8)
  • 0.1875 in (2)
  • 0.2362 in (35)
  • 0.25 in (8)
  • 0.3125 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.3937 in (10)
  • 0.4724 in (11)
  • 0.5 in (8)
  • 0.5512 in (3)
  • 0.625 in (3)
  • 0.6299 in (8)
  • 0.7087 in (1)
  • 0.75 in (9)
  • 0.7874 in (4)
  • 0.9843 in (1)
  • 1.0 in (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.175 mm (2)
  • 4.0 mm (8)
  • 4.763 mm (2)
  • 6.0 mm (35)
  • 6.35 mm (8)
  • 7.938 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.7 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.4 mm (5)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • TIALN (36)
  • TIALN-LW (6)
  • TICN-CT (5)
  • UNCOATED (4)
  • WP15PE (85)
Platform
Platform
  • Series 4001 (14)
  • Series 4503 (16)
  • Series 4603 (7)
  • Series 4C03 (6)
  • Series 4C05 (16)
  • Series 4S05/4S07 (15)
  • Series 4S07 (7)
  • Series 4S0F (1)
  • Series D503/D513 (23)
  • Series D507/D517 (15)
  • Series DC03 (6)
  • Vision Plus (10)
Tool Unit
Tool Unit
  • I (45)
  • M (91)
kmtConfigurable
kmtConfigurable
  • true (132)
  • false (4)
Over All Length [L]
Over All Length [L]
  • 38.1 mm (2)
  • 50.0 mm (19)
  • 50.8 mm (8)
  • 54.0 mm (8)
  • 57.0 mm (12)
  • 58.0 mm (5)
  • 63.0 mm (5)
  • 63.5 mm (8)
  • 66.0 mm (3)
  • 72.0 mm (4)
  • 73.0 mm (3)
  • 76.0 mm (4)
  • 76.2 mm (6)
  • 82.0 mm (1)
  • 83.0 mm (8)
  • 88.9 mm (3)
  • 89.0 mm (1)
  • 92.0 mm (6)
  • 100.0 mm (4)
  • 101.6 mm (8)
  • 104.0 mm (3)
  • 114.3 mm (2)
  • 121.0 mm (1)
  • 125.0 mm (2)
  • 127.0 mm (5)
  • 133.35 mm (1)
  • 139.7 mm (1)
  • 150.0 mm (2)
  • 165.1 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.5 in (2)
  • 1.9685 in (16)
  • 1.969 in (3)
  • 2.0 in (8)
  • 2.126 in (8)
  • 2.244 in (7)
  • 2.2441 in (5)
  • 2.283 in (2)
  • 2.2835 in (3)
  • 2.48 in (2)
  • 2.4803 in (3)
  • 2.5 in (8)
  • 2.598 in (1)
  • 2.5984 in (2)
  • 2.8346 in (2)
  • 2.835 in (2)
  • 2.874 in (3)
  • 2.9921 in (4)
  • 3.0 in (6)
  • 3.2283 in (1)
  • 3.2677 in (4)
  • 3.268 in (4)
  • 3.5 in (3)
  • 3.5039 in (1)
  • 3.622 in (6)
  • 3.937 in (4)
  • 4.0 in (8)
  • 4.0945 in (3)
  • 4.5 in (2)
  • 4.7638 in (1)
  • 4.921 in (1)
  • 4.9213 in (1)
  • 5.0 in (5)
  • 5.25 in (1)
  • 5.5 in (1)
  • 5.9055 in (1)
  • 5.906 in (1)
  • 6.5 in (1)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Hochleistungs-Vollhartmetall-Schaftfräser • Schlichten

Serien D507 D517 • metrisch
(15 Products)
  • Werkzeugabmessungen: Schneidreihen: 6 Werkzeugabmessungen: Schneidreihen: 6
  • Spiralwinkel: 45°Spiralwinkel: 45°
  • Schneideckenausführung: Ebene StirnflächeSchneideckenausführung: Ebene Stirnfläche
  • 3855138551
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Zylinderschaft – WeldonZylinderschaft – Weldon
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
5559100 D50706002W D50706002W   WP15PE Weldon 6.0000 .2362 6.0 .2362 10.0000 .3937 54.0000 2.126 6
    List price:
    $49.53 /each.
    Your price::
    5559111 D51712005W D51712005W   WP15PE Weldon 12.0000 .4724 12.0 .4724 26.0000 1.023 83.0000 3.267 6
      List price:
      $100.68 /each.
      Your price::
      5559103 D50712005W D50712005W   WP15PE Weldon 12.0000 .4724 12.0 .4724 16.0000 .6299 73.0000 2.874 6
        List price:
        $119.70 /each.
        Your price::
        5559105 D50716006W D50716006W   WP15PE Weldon 16.0000 .6299 16.0 .6299 22.0000 .8661 82.0000 3.228 6
          List price:
          $213.80 /each.
          Your price::
          5559113 D51716006W D51716006W   WP15PE Weldon 16.0000 .6299 16.0 .6299 32.0000 1.259 92.0000 3.622 6
            List price:
            $180.07 /each.
            Your price::
            5559101 D50708003W D50708003W   WP15PE Weldon 8.0000 .3150 8.0 .315 12.0000 .4724 58.0000 2.283 6
              List price:
              $61.91 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              High-Performance Solid Carbide End Mills • Finishing

              Series 4S05 4S07 • Lists 4S05 4S07 4S17 4S27 4S47 4S67
              (15 Products)
              • Werkzeugabmessungen: Schneidreihen: X (variabel)Werkzeugabmessungen: Schneidreihen: X (variabel)
              • Spiralwinkel: 45°Spiralwinkel: 45°
              • Schneideckenausführung: Ebene StirnflächeSchneideckenausführung: Ebene Stirnfläche
              • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Adapter Style Machine Side [L3] Usable Length [L3] Usable Length [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth