successfully added to cart
View Cart

Top Notch® Gewindedrehen und Einstechen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (1)
  • Grooving Grooving (9)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (1)
  • OD Thread Turning OD Thread Turning (9)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (1)
  • TRN Boring TRN Boring (8)
  • Threading Threading (9)
  • Turning Turning (1)
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum
      (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (9)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (9)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Type of Thread
  • 60 (5)
  • ACME (7)
  • API (5)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (5)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (5)
  • UNJ (3)
Cutting Condition
  • Heavily Interrupted Cut (9)
  • Lightly Interrupted Cut (9)
  • Smooth Cut (9)
  • Varying Depth of Cut (9)
Cutting Condition Material
  • H-All (9)
  • K-All (9)
  • M-All (9)
  • N-All (9)
  • P-All (9)
  • S-All (9)
Connection Style
  • KM (1)
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (9)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.051 (2)
  • 0.057 (1)
  • 0.066 (3)
  • 0.076 (5)
  • 0.08 (3)
  • 0.094 (3)
  • 0.097 (1)
  • 0.1 (3)
  • 0.102 (3)
  • 0.116 (2)
  • 0.117 (1)
  • 0.127 (3)
  • 0.131 (3)
  • 0.132 (3)
  • 0.133 (3)
  • 0.15 (3)
  • 0.155 (3)
  • 0.157 (3)
  • 0.16 (2)
  • 0.165 (5)
  • 0.173 (3)
  • 0.178 (3)
  • 0.19 (5)
  • 0.191 (5)
  • 0.198 (3)
  • 0.2 (3)
  • 0.202 (3)
  • 0.224 (3)
  • 0.235 (3)
  • 0.244 (2)
  • 0.25 (3)
  • 0.251 (3)
  • 0.254 (5)
  • 0.269 (3)
  • 0.282 (3)
  • 0.284 (3)
  • 0.3 (3)
  • 0.315 (4)
  • 0.318 (7)
  • 0.33 (3)
  • 0.34 (3)
  • 0.343 (2)
  • 0.356 (3)
  • 0.404 (3)
  • 0.406 (5)
  • 0.43 (3)
  • 0.445 (5)
  • 0.472 (2)
  • 0.49 (3)
  • 0.508 (3)
  • 0.565 (1)
  • 0.57 (1)
  • 0.572 (7)
  • 0.575 (4)
  • 0.787 (3)
  • 0.826 (4)
  • 0.902 (5)
  • 1.0 (3)
  • 1.194 (3)
  • 1.195 (1)
  • 1.25 (3)
  • 1.5 (3)
  • 1.585 (3)
  • 1.588 (5)
  • 1.59 (1)
  • 1.75 (3)
  • 1.98 (1)
  • 1.981 (3)
  • 2.0 (5)
  • 2.25 (5)
  • 2.388 (5)
  • 2.39 (1)
  • 2.5 (2)
  • 3.175 (2)
  • 3.18 (1)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (1)
  • 0.0026 (3)
  • 0.003 (5)
  • 0.0031 (3)
  • 0.0037 (3)
  • 0.0038 (1)
  • 0.004 (3)
  • 0.0046 (3)
  • 0.005 (3)
  • 0.0052 (3)
  • 0.0053 (3)
  • 0.0059 (3)
  • 0.006 (3)
  • 0.0062 (3)
  • 0.0065 (5)
  • 0.0068 (3)
  • 0.007 (3)
  • 0.0075 (5)
  • 0.0078 (3)
  • 0.0079 (2)
  • 0.008 (3)
  • 0.0088 (3)
  • 0.0093 (3)
  • 0.0096 (2)
  • 0.0099 (3)
  • 0.01 (5)
  • 0.0106 (3)
  • 0.0111 (3)
  • 0.0112 (3)
  • 0.0118 (3)
  • 0.0124 (3)
  • 0.0125 (7)
  • 0.013 (3)
  • 0.0135 (5)
  • 0.014 (3)
  • 0.0159 (3)
  • 0.016 (5)
  • 0.017 (3)
  • 0.0175 (5)
  • 0.0186 (2)
  • 0.0193 (3)
  • 0.02 (3)
  • 0.0225 (7)
  • 0.031 (3)
  • 0.0325 (4)
  • 0.0355 (5)
  • 0.0394 (3)
  • 0.047 (3)
  • 0.0492 (3)
  • 0.0591 (3)
  • 0.0625 (5)
  • 0.0689 (3)
  • 0.078 (3)
  • 0.0787 (5)
  • 0.0886 (5)
  • 0.094 (5)
  • 0.0984 (2)
  • 0.106 (1)
  • 0.125 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (3)
  • K313 (5)
  • K420 (9)
  • K4H (3)
  • K68 (9)
  • KB1345 (5)
  • KB1630 (5)
  • KB5625 (3)
  • KC250 (3)
  • KC5010 (7)
  • KC5025 (9)
  • KC5410 (5)
  • KC710 (5)
  • KC720 (5)
  • KC722 (5)
  • KC730 (7)
  • KC732 (3)
  • KC810 (9)
  • KC850 (9)
  • KC910 (3)
  • KC9110 (5)
  • KC9120 (3)
  • KC9320 (5)
  • KC935 (5)
  • KC950 (5)
  • KCK20 (5)
  • KCK20B (5)
  • KCP10B (5)
  • KCP25B (5)
  • KCU10 (7)
  • KCU25 (8)
  • KD050 (2)
  • KD081 (3)
  • KD100 (4)
  • KD120 (5)
  • KD1425 (3)
  • KT175 (3)
  • KT315 (5)
  • KU10T (5)
  • KU25T (5)
  • KU30T (5)
  • KY3000 (5)
  • THM (3)
  • TN10P (4)
  • TN6010 (5)
  • TN6025 (8)
  • TN7110 (5)
  • WU10HT (2)
  • WU10PT (2)
  • WU25PT (1)
Hand Of Tool
  • R (1)
Minimum Axial Groove Diameter
  • 0.0 (1)
  • 1.626 (1)
  • 1.874 (1)
  • 3.5 (1)
  • 4.173 (8)
  • 5.5 (1)
  • 6.874 (1)
to
Minimum Axial Groove Diameter
  • 0.0 (1)
  • 41.3 (1)
  • 47.6 (1)
  • 88.9 (1)
  • 106.0 (8)
  • 139.7 (1)
  • 174.6 (1)
to
Maximum Axial Groove Diameter
  • 9999.0 (8)
to
Maximum Axial Groove Diameter
  • 393.661 (8)
to
Cutting Direction
  • E (1)
Rake Angle Style
  • NEUTRAL (ZERO) (1)
Maximum Bore Depth
  • 70.0 (8)
to
Maximum Bore Depth
  • 2.756 (8)
to
frontEnd
Cutting Width
  • 1.0 (3)
  • 1.19 (1)
  • 1.194 (3)
  • 1.2 (3)
  • 1.5 (3)
  • 1.57 (3)
  • 1.575 (3)
  • 1.75 (3)
  • 1.829 (3)
  • 1.981 (3)
  • 2.0 (3)
  • 2.2 (3)
  • 2.235 (3)
  • 2.24 (2)
  • 2.25 (1)
  • 2.388 (3)
  • 2.39 (1)
  • 2.464 (3)
  • 2.5 (3)
  • 2.667 (3)
  • 2.743 (3)
  • 2.75 (3)
  • 2.794 (3)
  • 2.997 (3)
  • 3.0 (5)
  • 3.099 (3)
  • 3.17 (3)
  • 3.175 (5)
  • 3.18 (1)
  • 3.2 (5)
  • 3.25 (3)
  • 3.251 (3)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (5)
  • 3.607 (3)
  • 3.96 (3)
  • 3.962 (3)
  • 3.974 (2)
  • 3.988 (3)
  • 4.0 (5)
  • 4.24 (1)
  • 4.242 (5)
  • 4.25 (2)
  • 4.3 (3)
  • 4.5 (5)
  • 4.521 (3)
  • 4.699 (4)
  • 4.775 (5)
  • 4.78 (1)
  • 4.785 (1)
  • 4.788 (1)
  • 4.8 (3)
  • 4.801 (5)
  • 4.81 (3)
  • 4.88 (2)
  • 4.95 (3)
  • 5.0 (2)
  • 5.004 (4)
  • 5.131 (2)
  • 5.41 (2)
  • 5.5 (2)
  • 5.537 (2)
  • 5.563 (2)
  • 6.0 (4)
  • 6.35 (6)
  • 6.36 (1)
  • 6.48 (2)
  • 7.01 (2)
  • 7.137 (4)
  • 7.925 (4)
  • 8.001 (1)
  • 8.738 (2)
  • 8.992 (2)
  • 9.525 (4)
  • 9.65 (2)
  • 9.73 (2)
to
Cutting Width
  • 0.0394 (3)
  • 0.047 (3)
  • 0.0472 (3)
  • 0.0591 (3)
  • 0.062 (3)
  • 0.0689 (3)
  • 0.072 (3)
  • 0.078 (3)
  • 0.0787 (3)
  • 0.079 (2)
  • 0.0866 (3)
  • 0.088 (3)
  • 0.0886 (1)
  • 0.094 (3)
  • 0.097 (3)
  • 0.0984 (3)
  • 0.105 (3)
  • 0.108 (3)
  • 0.1083 (3)
  • 0.11 (3)
  • 0.118 (3)
  • 0.1181 (5)
  • 0.122 (3)
  • 0.125 (5)
  • 0.126 (5)
  • 0.128 (3)
  • 0.131 (2)
  • 0.1378 (5)
  • 0.142 (3)
  • 0.156 (3)
  • 0.157 (3)
  • 0.1574 (5)
  • 0.1575 (5)
  • 0.167 (5)
  • 0.1673 (2)
  • 0.169 (3)
  • 0.1771 (5)
  • 0.1772 (5)
  • 0.178 (3)
  • 0.185 (4)
  • 0.188 (5)
  • 0.189 (5)
  • 0.192 (2)
  • 0.195 (3)
  • 0.1969 (2)
  • 0.197 (4)
  • 0.202 (2)
  • 0.213 (2)
  • 0.2165 (2)
  • 0.2166 (1)
  • 0.218 (2)
  • 0.219 (2)
  • 0.2362 (4)
  • 0.25 (6)
  • 0.255 (2)
  • 0.276 (2)
  • 0.281 (4)
  • 0.312 (4)
  • 0.315 (1)
  • 0.344 (2)
  • 0.354 (2)
  • 0.375 (4)
  • 0.38 (2)
  • 0.383 (2)
to
Insert Size
  • 3 (3)
  • 4 (2)
  • 5 (2)
  • 6 (2)
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
  • 7.61 (2)
  • 10.54 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
  • 0.294 (2)
  • 0.3 (2)
  • 0.415 (2)
to
insertGeometry
Cutting Tool Material
  • B H (5)
  • B L (3)
  • C N (5)
  • D P (4)
  • H T (5)
  • H W (9)
backEnd
Connection Type
  • TAPER SHANK (1)
System Size
  • KM80TS (1)
other
Platform
  • KM80 (8)
  • KM80TS (1)
Over All Length [L]
  • 2.7559 (1)
  • 2.756 (8)
to
Insert Hand
  • L (4)
  • R (5)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM80TS™ Schneidköpfe

Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
(8 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3665055 KM80TSNEL4 KM80TSNEL4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4R 2.18 4.81
    List price:
    $568.85 /each.
    Your price::
    Qty
    3665057 KM80TSNEL5 KM80TSNEL5 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG5R 2.28 5.02
      List price:
      $568.85 /each.
      Your price::
      Qty
      3665053 KM80TSNEL3 KM80TSNEL3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3R 2.14 4.72
        List price:
        $568.85 /each.
        Your price::
        Qty
        3665054 KM80TSNER3 KM80TSNER3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3L 2.14 4.72
          List price:
          $568.85 /each.
          Your price::
          Qty
          3665056 KM80TSNER4 KM80TSNER4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4L 2.18 4.81
            List price:
            $568.85 /each.
            Your price::
            Qty
            3665058 KM80TSNER5 KM80TSNER5 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG5L 2.28 5.02
              List price:
              $568.85 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              KM80TS™ Schneidköpfe

              Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
              (1 Products)
              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3668864 KM80TSNSR3 KM80TSNSR3 70.0000 2.755 53.0000 2.086 NG3R 1.96 4.32
                List price:
                $568.85 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty

                Sold in pkg. of

                product-image
                Please adjust the following properties from

                ISO Katalog

                ANSI Katalog

                to find similar products.
                If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                We have found the following CAD Drawings

                Select the files you are looking for and download them all at once

                You should be logged to see your dashboard information
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart