TopThread™ and TopGroove™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (2)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (2)
- S High-Temp Alloys (2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (2)
- H1Hardened Materials 44-48 HRC(2)
- H2Hardened Materials 48-55 HRC(2)
- H3Hardened Materials 56-60 HRC(2)
- H4Hardened Materials >60 HRC(2)
Applications
Applications
Facing (1)
Grooving (2)
ID Grooving (2)
ID Thread Turning (2)
OD Thread Turning (2)
Turning (1)
Type of Thread
Type of Thread
- 60 (2)
- ACME (2)
- API (2)
- API RD (2)
- BSW (2)
- BUTTRESS (2)
- M (1)
- NPT (2)
- STUB ACME (2)
- UN (2)
- UNJ (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (2)
- Lightly Interrupted Cut (2)
- Smooth Cut (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (2)
- 2.0 (2)
to
Corner Radius
Corner Radius
- 0.001 in(1)
- 0.002 in(1)
- 0.003 in(2)
- 0.004 in(2)
- 0.005 in(2)
- 0.006 in(2)
- 0.007 in(2)
- 0.008 in(2)
- 0.009 in(2)
- 0.01 in(2)
- 0.011 in(1)
- 0.012 in(2)
- 0.013 in(2)
- 0.014 in(2)
- 0.016 in(2)
- 0.018 in(2)
- 0.019 in(1)
- 0.02 in(2)
- 0.023 in(2)
- 0.031 in(2)
- 0.035 in(2)
- 0.039 in(2)
- 0.047 in(2)
- 0.049 in(2)
- 0.059 in(2)
- 0.062 in(2)
- 0.063 in(2)
- 0.069 in(2)
- 0.078 in(2)
- 0.079 in(2)
- 0.089 in(2)
- 0.094 in(2)
to
Corner Radius
Corner Radius
- 0.025 mm(1)
- 0.05 mm(1)
- 0.075 mm(2)
- 0.1 mm(2)
- 0.125 mm(2)
- 0.15 mm(2)
- 0.175 mm(2)
- 0.2 mm(2)
- 0.225 mm(2)
- 0.25 mm(2)
- 0.275 mm(1)
- 0.3 mm(2)
- 0.325 mm(2)
- 0.35 mm(2)
- 0.4 mm(2)
- 0.45 mm(2)
- 0.475 mm(1)
- 0.5 mm(2)
- 0.575 mm(2)
- 0.775 mm(2)
- 0.9 mm(2)
- 1.0 mm(2)
- 1.2 mm(2)
- 1.25 mm(2)
- 1.5 mm(2)
- 1.575 mm(2)
- 1.6 mm(2)
- 1.75 mm(2)
- 1.975 mm(2)
- 2.0 mm(2)
- 2.25 mm(2)
- 2.4 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (2)
- K420 (2)
- K68 (2)
- KB1630 (2)
- KBH20 (1)
- KC5010 (2)
- KC5025 (2)
- KC5410 (1)
- KC720 (2)
- KC730 (2)
- KC850 (2)
- KCK20 (2)
- KCK20B (2)
- KCP10B (2)
- KCP25B (2)
- KCP25C (2)
- KCU10 (2)
- KCU10B (2)
- KCU25 (2)
- KCU25B (2)
- KD1425 (2)
- KT315 (2)
- THM (2)
- TN6010 (2)
- TN6025 (2)
- WU10HT (1)
- WU25PT (1)
Hand Of Tool
Hand Of Tool
- L (1)
- R (1)
Front-End
Cutting Width
Cutting Width
- 0.0394 in(2)
- 0.047 in(2)
- 0.0472 in(2)
- 0.0591 in(2)
- 0.062 in(2)
- 0.0689 in(2)
- 0.072 in(2)
- 0.078 in(2)
- 0.0787 in(2)
- 0.079 in(1)
- 0.0866 in(2)
- 0.088 in(2)
- 0.0886 in(1)
- 0.094 in(2)
- 0.097 in(2)
- 0.0984 in(2)
- 0.105 in(2)
- 0.1083 in(2)
- 0.11 in(2)
- 0.118 in(2)
- 0.1181 in(2)
- 0.122 in(2)
- 0.125 in(2)
- 0.126 in(2)
- 0.128 in(2)
- 0.131 in(1)
- 0.1378 in(2)
- 0.142 in(2)
- 0.156 in(2)
- 0.157 in(2)
- 0.1574 in(2)
- 0.1575 in(2)
- 0.1673 in(2)
- 0.1771 in(2)
- 0.1772 in(2)
- 0.178 in(2)
- 0.185 in(2)
- 0.188 in(2)
- 0.189 in(2)
- 0.192 in(1)
- 0.195 in(2)
- 0.196 in(2)
to
Cutting Width
Cutting Width
- 1.0 mm(2)
- 1.19 mm(1)
- 1.194 mm(2)
- 1.2 mm(2)
- 1.5 mm(2)
- 1.57 mm(2)
- 1.575 mm(2)
- 1.75 mm(2)
- 1.829 mm(2)
- 1.981 mm(2)
- 2.0 mm(2)
- 2.2 mm(2)
- 2.235 mm(2)
- 2.236 mm(1)
- 2.25 mm(1)
- 2.387 mm(1)
- 2.388 mm(2)
- 2.39 mm(1)
- 2.464 mm(2)
- 2.5 mm(2)
- 2.667 mm(2)
- 2.75 mm(2)
- 2.794 mm(2)
- 2.997 mm(2)
- 3.0 mm(2)
- 3.099 mm(2)
- 3.17 mm(2)
- 3.175 mm(2)
- 3.2 mm(2)
- 3.25 mm(2)
- 3.251 mm(1)
- 3.32 mm(1)
- 3.5 mm(2)
- 3.607 mm(2)
- 3.96 mm(2)
- 3.962 mm(2)
- 3.974 mm(1)
- 3.988 mm(2)
- 4.0 mm(2)
- 4.25 mm(2)
- 4.5 mm(2)
- 4.521 mm(2)
- 4.699 mm(2)
- 4.775 mm(2)
- 4.8 mm(2)
- 4.801 mm(2)
- 4.88 mm(1)
- 4.95 mm(2)
- 4.953 mm(1)
- 4.978 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (2)
- B L (1)
- D P (2)
- H T (2)
- H W (2)
No filters matching ""
