Top Notch® Threading and Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (8)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(8)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(8)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(8)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(8)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(8)
- M Stainless Steel (8)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(8)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(8)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(8)
- K Cast Iron (8)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(8)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(8)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(8)
- N Non-Ferrous Materials (9)
- N1Wrought Aluminum (9)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(8)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (8)
- N6Carbon, Graphite Composites, CFRP (8)
- N7MMC's (7)
- S High-Temp Alloys (9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
- H Hardened Materials (7)
- H1Hardened Materials 44-48 HRC(7)
- H2Hardened Materials 48-55 HRC(7)
- H3Hardened Materials 56-60 HRC(5)
- H4Hardened Materials >60 HRC(5)
Applications
Applications
Chamfer Turning (1)
Cut-Off (1)
Deep Grooving (1)
Face Grooving (1)
Facing (1)
Grooving (9)
ID Grooving (8)
ID Thread Turning (8)
Multiple Direction Cutting (1)
OD Thread Turning (9)
Plunge Turning (1)
Profiling (1)
TRN Boring (8)
Turning (1)
Type of Thread
Type of Thread
- 60 (5)
- ACME (7)
- API (5)
- API RD (4)
- BSW (3)
- BUTTRESS (5)
- M (2)
- NPT (3)
- STUB ACME (3)
- UN (5)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (7)
- Lightly Interrupted Cut (7)
- Smooth Cut (8)
Connection Style
Connection Style
- KM (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (5)
- 2.0 (9)
to
Internal Coolant Capability
Internal Coolant Capability
Corner Radius
Corner Radius
- 0.025 mm(2)
- 0.05 mm(2)
- 0.075 mm(5)
- 0.1 mm(3)
- 0.125 mm(3)
- 0.15 mm(5)
- 0.175 mm(5)
- 0.2 mm(5)
- 0.225 mm(3)
- 0.25 mm(5)
- 0.275 mm(2)
- 0.3 mm(3)
- 0.325 mm(5)
- 0.35 mm(5)
- 0.4 mm(4)
- 0.45 mm(4)
- 0.475 mm(2)
- 0.5 mm(3)
- 0.575 mm(6)
- 0.775 mm(3)
- 0.825 mm(2)
- 0.9 mm(5)
- 1.0 mm(3)
- 1.2 mm(3)
- 1.25 mm(3)
- 1.5 mm(3)
- 1.575 mm(3)
- 1.6 mm(5)
- 1.75 mm(3)
- 1.975 mm(3)
- 2.0 mm(4)
- 2.25 mm(3)
- 2.4 mm(5)
- 2.5 mm(2)
- 3.175 mm(2)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (5)
- K420 (6)
- K68 (9)
- KB1630 (5)
- KBH20 (2)
- KC5010 (7)
- KC5025 (8)
- KC5410 (2)
- KC720 (5)
- KC730 (5)
- KC850 (5)
- KC9110 (1)
- KCK20 (5)
- KCK20B (5)
- KCP10B (5)
- KCP25B (5)
- KCP25C (5)
- KCU10 (6)
- KCU10B (7)
- KCU25 (8)
- KCU25B (8)
- KD1425 (3)
- KT315 (4)
- THM (3)
- TN6010 (5)
- TN6025 (7)
- WU10HT (2)
- WU10PT (2)
- WU25PT (1)
Hand Of Tool
Hand Of Tool
- R (1)
F Dimension
F Dimension
- 53.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(1)
- 41.3 mm(1)
- 47.6 mm(1)
- 88.9 mm(1)
- 106.0 mm(8)
- 139.7 mm(1)
- 174.6 mm(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(8)
to
Cutting Direction
Cutting Direction
- E (1)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (1)
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(8)
to
Front-End
Cutting Width
Cutting Width
- 1.0 mm(3)
- 1.19 mm(1)
- 1.194 mm(3)
- 1.2 mm(3)
- 1.5 mm(3)
- 1.57 mm(3)
- 1.575 mm(3)
- 1.75 mm(3)
- 1.829 mm(3)
- 1.981 mm(3)
- 2.0 mm(3)
- 2.2 mm(3)
- 2.235 mm(3)
- 2.236 mm(2)
- 2.25 mm(1)
- 2.387 mm(2)
- 2.388 mm(3)
- 2.39 mm(1)
- 2.464 mm(3)
- 2.5 mm(3)
- 2.667 mm(3)
- 2.75 mm(3)
- 2.794 mm(3)
- 2.997 mm(3)
- 3.0 mm(5)
- 3.099 mm(3)
- 3.17 mm(3)
- 3.175 mm(5)
- 3.18 mm(1)
- 3.2 mm(4)
- 3.25 mm(3)
- 3.251 mm(2)
- 3.32 mm(2)
- 3.5 mm(5)
- 3.607 mm(3)
- 3.96 mm(3)
- 3.962 mm(3)
- 3.974 mm(2)
- 3.988 mm(3)
- 4.0 mm(5)
- 4.242 mm(2)
- 4.25 mm(3)
- 4.5 mm(5)
- 4.521 mm(3)
- 4.699 mm(3)
- 4.775 mm(5)
- 4.78 mm(1)
- 4.785 mm(1)
- 4.788 mm(1)
- 4.8 mm(3)
- 4.801 mm(5)
- 4.88 mm(2)
- 4.95 mm(3)
- 4.953 mm(2)
- 4.978 mm(3)
- 5.0 mm(2)
- 5.004 mm(1)
- 5.41 mm(2)
- 5.5 mm(2)
- 6.0 mm(2)
- 6.35 mm(3)
- 6.36 mm(1)
- 6.502 mm(2)
- 7.137 mm(1)
- 7.925 mm(1)
- 9.525 mm(1)
- 9.677 mm(2)
- 9.754 mm(2)
to
Insert Size
Insert Size
- 3 (3)
- 4 (2)
- 5 (2)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 5.33 mm(2)
- 7.47 mm(2)
- 7.61 mm(2)
- 10.54 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (5)
- B L (2)
- D P (3)
- H T (4)
- H W (9)
Back-End
Connection Type
Connection Type
- TAPER SHANK (1)
System Size
System Size
- KM80TS (1)
No filters matching ""
