Increased cutting temperatures can limit your speed capabilities.
WIDIA™ Victory™ Turning Grade WS10PT™ contains an advanced PVD coating. This coating provides greater wear resistance at increased temperatures enabling higher cutting speeds while machining super alloys.
Low edge toughness can cause chipping of the cutting edge while operating at high feed rates, interrupted cuts.
This affects the reliability of the tool while machining different types of super alloys and stainless steels.
WIDIA™ Victory™ Turning Grade WS25PT™, with its fine grain substrate and superior PVD coating, provides excellent edge toughness and wear resistance at elevated speeds..
The presence of hard, abrasive inter-metallic compounds and carbides in high-temp alloys causes severe abrasive wear at the cutting edge.
Looking for inserts with grades tough enough to machine high-temp materials flawlessly?
Three WIDIA™ Victory™ grades were developed to machine tough materials into components like disks, spools and shafts in aerospace engines or land-based gas turbines:
- WS10PT™ for Ni/Co/FE-based materials
- WS25PT™ for INCONEL®
- WU10HT™ for Titanium
Operational security is vital in heavy duty turning of heavy duty steel applications.
WIDIA™ Victory™ Turning Grade WP35CT™, with the combination of tough substrate and wear resistant coating, provides unbelievable toughness and reliability allowing high metal removal rates in most demanding interrupted cuts.
Built up edge is a common issue in turning stainless steels.
WIDIA™ Victory™ Grades WM25CT/WM35CT offer a good balance of toughness and wear resistance with insert chip breakers UR and MR. To address the built-up edge issue, apply a coated grade to increase your speed/feed rate, or use coolant in your application.
Applying turning operations in the most cost effective and productive manner requires state of the art cutting tool technology combined with strong engineering knowledge of chip breaker design.
WIDIA™ Victory™ Turning grades and chip breakers provide the most comprehensive offering for rough to finish turning in general engineering, automotive, aerospace, and energy segments.
Looking for a versatile insert that can be applied on a variety of components and materials?
WIDIA™ Victory™ inserts featuring grades WP35CT for roughing and WS25PT for medium machining are proven solutions in performance and versatility.
Rough machining of stainless-steel cast components requires not only cutting tool toughness to withstand heavy interruptions, but also resistance to chip off.
WIDIA™ Victory™ grade WM35CT features a super tough substrate and wear resistant coating. Ideal choice to provide reliable performance in demanding applications. The polished surface resists built up edge even at low cutting speeds.
It’s a challenge to machine a wide variety of small-batch components with variable stock.
In these conditions, an insert with high toughness and excellent wear resistance is a must.
WIDIA™ Victory™ grades WP35CT, WM35CT in combination with super roughing chip breakers like SR are the right fit to meet heavy duty machining challenges.
Inserts should be capable of providing long tool life and consistent quality to meet CPC requirements and reduce machine down time.
WIDIA™ Victory™ Grades WP05CT and WP15CT are equipped with a multi-layer coating designed to operate at high cutting speeds with slow wear progression leading to a longer tool life.
Mass production on automated lines requires very good chip breaking for uninterrupted production.
WIDIA™ Victory™ chip breakers such as RH, MR, MP, FP are reliable solutions in effective chip breaking at different cutting parameters in various types of steels.