3/4" • Weldon® Shank
3/4″ • Weldon® Shanks
Features and benefits
- Double-sided, 12 cutting edges.
- Anti-rotation feature for better stability and higher feed rates.
- Excellent for heavy roughing and semi-finishing of all materials.
- Suitable for high-feed face milling operations.
Uses and application
Mango — Weldon cilíndrico 2 plano
Perfilado 3D
Fresado lateral/Fresado en escuadra: Nariz de bola
Ranurado: Placa cuadrada
Planeado
Mecanizado de alojamientos
Fresado — Con refrigeración interna
36310
Filters and Columns
Filters
Filters
View filters in
Metric
Inch
Material de la pieza de trabajo
Material de la pieza de trabajo
-
P Acero (1)
-
P0Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (1)
-
P1Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (1)
-
P2Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (1)
-
P3Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (1)
-
P4Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (1)
-
P5Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (1)
-
P6Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (1)
-
-
M Acero inoxidable (1)
-
M1Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (1)
-
M2Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (1)
-
M3Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (1)
-
-
K Fundición (1)
-
K1Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (1)
-
K2Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (1)
-
K3Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (1)
-
-
S Aleaciones de alta temperatura (1)
-
S1Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (1)
-
S2Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (1)
-
S3Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (1)
-
S4Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (1)
-
-
H Materiales endurecidos (1)
-
H1Materiales endurecidos 44-48 HRC (1)
-
Aplicaciones
Aplicaciones
-
Face Milling (1)
-
Pocket (1)
-
Pocket Milling (1)
-
Profile Milling (1)
-
Ramping (1)
-
Shoulder Ball Nose (1)
-
Shoulder Milling (1)
-
-
Slot Milling (1)
-
Slot Square End (1)
application
Calidad de herramienta de corte
Calidad de herramienta de corte
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (1)
-
WU35PM (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1-
1
of
1 results
Metric
Inch
Show
Metric
Inch
| Número de material SAP | Número de catálogo ISO | Número de catálogo ANSI | Adaptador/Mango/Diá int [D] | Adaptador/Mango/Diá int [D] | Diámetro de corte efectivo [D1] | Diámetro de corte efectivo [D1] | Longitud total [L] | Longitud total [L] | Diámetro de corte máximo [D1MAX] | Diámetro de corte máximo [D1MAX] | Peso en libras | 1.ª profundidad de corte máxima [AP1MAX] | 1.ª profundidad de corte máxima [AP1MAX] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6009950 | M200D200Z03W150RN64 | M200D200Z03W150RN64 | 38.09 | 1.5 | 31.7 | 1.25 | 119.13 | 4.69 | 50.8 | 2 | 2 | 9.5 | .37 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$670.70
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Insert Selection Guide • M200™ Series • Large IC Expansion
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Light
|
General
|
Heavy
|
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
Recommended Starting Speeds [SFM]
| Material Group | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |