-
P Steel (12)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
-
-
M Stainless Steel (12)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
-
-
K Cast Iron (12)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
-
-
N Non-Ferrous Materials (6)
-
N1Wrought Aluminum(6)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
-
N3High-Silicon Aluminum Alloys Si >12.2%(6)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100(6)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass(6)
-
N6Carbon, Graphite Composites, CFRP(6)
-
-
S High-Temp Alloys (12)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
-
Blind & Cross Hole Finishing (12)
-
Blind Hole Finishing (12)
-
Pre-Condition (12)
-
Through & Cross Hole Finishing (12)
-
Through Hole Finishing (12)
-
5.0 (2)
-
6.0 (2)
-
8.0 (2)
-
10.0 (2)
-
12.0 (2)
-
14.0 (2)
-
0.1969 (2)
-
0.2362 (2)
-
0.315 (2)
-
0.3937 (2)
-
0.4724 (2)
-
0.5512 (2)
-
Straight-Cylindrical (12)
-
4 (4)
-
6 (8)
-
K10F (6)
-
K10F-DCFD (6)
-
R (12)
-
N (12)
-
0.012 (4)
-
0.016 (4)
-
0.02 (4)
-
0.3 (4)
-
0.4 (4)
-
0.5 (4)
-
CYLINDRICAL (12)
-
0.2362 (4)
-
0.315 (2)
-
0.3937 (2)
-
0.4724 (2)
-
0.5512 (2)
-
6.0 (4)
-
8.0 (2)
-
10.0 (2)
-
12.0 (2)
-
14.0 (2)
-
K10F (6)
-
K10F-DCFD (6)
-
HSR (12)
-
M (12)
-
false (12)
-
true (12)
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Reamer Diameter Minimum | [D1] Reamer Diameter Minimum | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L] Overall Length | [L] Overall Length | [L4] Maximum Reaming Depth | [L4] Maximum Reaming Depth | [L10] Cutting Edge Length | [L10] Cutting Edge Length | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2437472 | 050270-000500 | 050270-000500 | K10F | 5.0000 | .1969 | 6.0 | .2362 | 74.0000 | 2.913 | 32.0000 | 1.259 | 12.0000 | .4724 |
|
2441337 | 450270-000500 | 450270-000500 | K10F-DCFD | 5.0000 | .1969 | 6.0 | .2362 | 74.0000 | 2.913 | 32.0000 | 1.259 | 12.0000 | .4724 |
|
2437523 | 050270-000600 | 050270-000600 | K10F | 6.0000 | .2362 | 6.0 | .2362 | 74.0000 | 2.913 | 33.0000 | 1.299 | 12.0000 | .4724 |
|
2441339 | 450270-000600 | 450270-000600 | K10F-DCFD | 6.0000 | .2362 | 6.0 | .2362 | 74.0000 | 2.913 | 33.0000 | 1.299 | 12.0000 | .4724 |
|
2437525 | 050270-000800 | 050270-000800 | K10F | 8.0000 | .3150 | 8.0 | .315 | 91.0000 | 3.582 | 50.0000 | 1.968 | 16.0000 | .6299 |
|
2441341 | 450270-000800 | 450270-000800 | K10F-DCFD | 8.0000 | .3150 | 8.0 | .315 | 91.0000 | 3.582 | 50.0000 | 1.968 | 16.0000 | .6299 |
|
2437526 | 050270-001000 | 050270-001000 | K10F | 10.0000 | .3937 | 10.0 | .3937 | 103.0000 | 4.055 | 58.0000 | 2.283 | 20.0000 | .7874 |
|
2441342 | 450270-001000 | 450270-001000 | K10F-DCFD | 10.0000 | .3937 | 10.0 | .3937 | 103.0000 | 4.055 | 58.0000 | 2.283 | 20.0000 | .7874 |
|
2437527 | 050270-001200 | 050270-001200 | K10F | 12.0000 | .4724 | 12.0 | .4724 | 118.0000 | 4.645 | 68.0000 | 2.677 | 24.0000 | .9449 |
|
2441353 | 450270-001200 | 450270-001200 | K10F-DCFD | 12.0000 | .4724 | 12.0 | .4724 | 118.0000 | 4.645 | 68.0000 | 2.677 | 24.0000 | .9449 |
|
2437529 | 050270-001400 | 050270-001400 | K10F | 14.0000 | .5512 | 14.0 | .5512 | 132.0000 | 5.196 | 81.0000 | 3.189 | 28.0000 | 1.102 |
|
2441354 | 450270-001400 | 450270-001400 | K10F-DCFD | 14.0000 | .5512 | 14.0 | .5512 | 132.0000 | 5.196 | 81.0000 | 3.189 | 28.0000 | 1.102 |
|
Replacement Product This item may be available through a distributor
Grades
-
K10F
Composición: Este metal duro de grano fino sin recubrir con una alta dureza ofrece una excelente resistencia al desgaste por abrasión junto con una fantástica tenacidad para aplicaciones de acabado fino.
Aplicación: Primera opción para el escariado de precisión de materiales no ferrosos.P SteelM Stainless SteelK Cast IronN Non-FerrousS High-Temp Alloys -
K10F-DCFD
Composición: Con un recubrimiento PVD TiAlN y un sustrato de metal duro de grano fino, esta calidad ofrece una excelente resistencia al desgaste junto con una excelente tenacidad para aplicaciones de acabado fino de velocidad media.
Aplicación: La primera opción en escariado de precisión de acero, acero inoxidable y fundición.P SteelM Stainless SteelK Cast IronS High-Temp Alloys