SNKT-21 • SN1205..
Plaquitas • SD1205..
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (3)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
-
-
M Stainless Steel (2)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
-
-
K Cast Iron (5)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
-
-
N Non-Ferrous Materials (1)
-
N1Wrought Aluminum(1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
-
N3High-Silicon Aluminum Alloys Si >12.2%(1)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
H2Hardened Materials 48-55 HRC(1)
-
H3Hardened Materials 56-60 HRC(1)
-
Applications
-
ID Thread Turning (6)
Cutting Edges Per Insert
-
4.0 (6)
to
Corner Radius
-
0.0 (6)
to
Corner Radius
-
0.0 (6)
to
application
Grade Of Cutting Tool
-
THM (1)
-
TN2510 (1)
-
TN5515 (1)
-
TN7525 (1)
-
TTI25 (1)
-
WK15CM (1)
Wiper Insert
-
N (6)
frontEnd
Insert Shape
-
S-SQUARE 90 (6)
insertGeometry
Shape
-
S-SQUARE 90 (6)
Insert IC Size
-
0.5 (6)
to
Insert IC Size
-
12.7 (6)
to
Cutting Edge Length
-
0.5 (6)
to
Cutting Edge Length
-
12.7 (6)
to
Cutting Tool Material
-
H T (1)
-
H W (5)
Chip Breaker CBMD
-
21 (6)
Tolerance Class
-
K (6)
other
Grade
-
THM (1)
-
TN2510 (1)
-
TN5515 (1)
-
TN7525 (1)
-
TTI25 (1)
-
WK15CM (1)
Platform
-
M660 Series (5)
Tool Unit
-
I (6)
-
M (6)
Insert Hand
-
R (6)
obsoleteFacet
-
true (6)
-
false (4)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 6
of 6 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [L10] Insert Cutting Edge Length | [L10] Insert Cutting Edge Length | [S] Insert Thickness | [S] Insert Thickness | [BS] Corner Facet Length | [BS] Corner Facet Length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2020689 | SNKT1205AZR21 | SNKT435AZR21 | TN5515 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2189 | 1.5400 | .0606 |
|
| 2022372 | SNKT1205AZR21 | SNKT435AZR21 | TN2510 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2189 | 1.5400 | .0606 |
|
| 2022373 | SNKT1205AZR21 | SNKT435AZR21 | TN7525 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2188 | 1.5400 | .0606 |
|
| 2022374 | SNKT1205AZR21 | SNKT435AZR21 | TTI25 | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2189 | 1.5400 | .0606 |
|
| 2022375 | SNKT1205AZR21 | SNKT435AZR21 | THM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2189 | 1.5400 | .0606 |
|
| 5427383 | SNKT1205AZR21 | SNKT435AZR21 | WK15CM | 4 | 12.7000 | .5000 | 12.7000 | .5000 | 5.5600 | .2188 | 1.5400 | .0606 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Grades
-
THM
Metal duro sin recubrir. Equilibrio extraordinariamente bueno de dureza, resistencia al desgaste, estabilidad del filo y tenacidad. Mecanizado ligero y medio. Para fundición, todos los metales no ferrosos y materiales no metálicos. Útil en condiciones desfavorables.
K Cast IronN Non-Ferrous -
TN2510
calidad de metal duro recubierto
- recubrimiento compuesto de MT-CVD-TiN-TiCN
- mecanizado ligero
- mecanizado de acero endurecido, estelita y fundición de hasta 64 HRC
- resistencia excelente al desgaste
P SteelK Cast IronH Hardened Materials -
TN5515
La calidad de metal duro recubierto TN5515 tiene una capa de MT-CVD-TiN-TiCN-Al203. Diseñada para una
relación de tenacidad y desgaste equilibrada. Ideal para el mecanizado ligero y medio de todas las fundiciones.
K Cast Iron -
TN7525
La calidad de metal duro recubierto TN7525 tiene una capa de MT-CVD-TiN-TiCN-Al203. Diseñada para el mecanizado ligero
y medio de todos los aceros y fundiciones nodulares.
P SteelM Stainless Steel -
TTI25P SteelM Stainless SteelK Cast Iron
-
WK15CMK Cast Iron
Guía para la selección de plaquitas
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | …20 | TN6540 | …31 | WP40PM | …31 | WP40PM |
| P3–P4 | …20 | TN7535 | …31 | WP35CM | …31 | WP35CM |
| P5–P6 | …20 | TN7535 | …31 | WP35CM | …31 | WP35CM |
| M1–M2 | …20 | TN6540 | …31 | WP25PM | …31 | WP25PM |
| M3 | ...20 | TN7535 | …31 | WP35CM | …31 | WP35CM |
| K1–K2 | ...21 | WK15CM | …31 | WK15CM | …31 | WK15CM |
| K3 | ...21 | WK15CM | …31 | WP35CM | …31 | WP35CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ...20 | TN6540 | …31 | WP25PM | …31 | WP25PM |
| S3 | – | – | – | – | – | – |
| S4 | ...20 | TN6540 | …31 | WP40PM | …31 | WP40PM |
| H1 | – | – | – | – | – | – |
Avances iniciales recomendados [mm]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| ...20 | 0,17 | 0,66 | 1,19 | 0,12 | 0,47 | 0,86 | 0,09 | 0,35 | 0,64 | 0,08 | 0,31 | 0,56 | 0,07 | 0,28 | 0,51 | ...20 |
| …21 | 0,24 | 0,74 | 1,25 | 0,18 | 0,53 | 0,89 | 0,13 | 0,40 | 0,66 | 0,12 | 0,35 | 0,58 | 0,11 | 0,32 | 0,53 | …21 |
| …31 | 0,26 | 0,76 | 1,28 | 0,19 | 0,55 | 0,91 | 0,14 | 0,41 | 0,68 | 0,12 | 0,36 | 0,59 | 0,11 | 0,33 | 0,54 | …31 |
| LightMachining | GeneralPurpose | HeavyMachining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| ...20 | .007 | .026 | .047 | .005 | .018 | .033 | .004 | .014 | .025 | .003 | .012 | .022 | .003 | .011 | .020 | ...20 |
| …21 | .010 | .029 | .049 | .007 | .021 | .035 | .005 | .016 | .026 | .005 | .014 | .023 | .004 | .013 | .021 | …21 |
| …31 | .010 | .030 | .050 | .007 | .022 | .036 | .006 | .016 | .027 | .005 | .014 | .023 | .004 | .013 | .021 | …31 |
| LightMachining | GeneralPurpose | HeavyMachining |
Velocidades iniciales recomendadas (m/min)
| Material Group | TN6525 | TN6540 | TN7525 | TN7535 | |||||||||
| P | 1 | 410 | 320 | 280 | 360 | 280 | 240 | 410 | 310 | 280 | 545 | 475 | 445 |
| 2 | 320 | 250 | 215 | 250 | 190 | 170 | 310 | 250 | 215 | 335 | 305 | 275 | |
| 3 | 280 | 215 | 185 | 215 | 170 | 140 | 280 | 215 | 185 | 305 | 275 | 245 | |
| 4 | 235 | 170 | 145 | 180 | 130 | 110 | 235 | 170 | 145 | 230 | 210 | 190 | |
| 5 | 310 | 235 | 200 | 240 | 180 | 150 | 310 | 235 | 200 | 310 | 275 | 250 | |
| 6 | 205 | 160 | 130 | 160 | 120 | 100 | 205 | 160 | 130 | 190 | 160 | 130 | |
| M | 1 | 190 | 120 | 80 | 130 | 80 | 60 | 245 | 220 | 185 | 245 | 220 | 185 |
| 2 | 120 | 80 | 50 | 80 | 50 | 40 | 220 | 190 | 170 | 220 | 190 | 170 | |
| 3 | 125 | 80 | 55 | 85 | 50 | 40 | 175 | 155 | 140 | 175 | 155 | 140 | |
| K | 1 | 275 | 245 | 220 | 220 | 205 | 180 | 380 | 280 | 240 | 355 | 320 | 290 |
| 2 | 215 | 190 | 180 | 175 | 155 | 140 | 325 | 240 | 200 | 280 | 250 | 230 | |
| 3 | 180 | 160 | 145 | 155 | 145 | 125 | 240 | 200 | 170 | 235 | 210 | 190 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 60 | 30 | 25 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WK15CM | WP40PM | TTI25 | THM | |||||||||
| P | 1 | – | – | – | 355 | 310 | 295 | 430 | 360 | 300 | – | – | – |
| 2 | – | – | – | 300 | 260 | 215 | 310 | 250 | 215 | – | – | – | |
| 3 | – | – | – | 275 | 235 | 190 | 310 | 250 | 215 | – | – | – | |
| 4 | – | – | – | 245 | 205 | 160 | 265 | 215 | 180 | – | – | – | |
| 5 | – | – | – | 205 | 185 | 160 | 320 | 235 | 200 | – | – | – | |
| 6 | – | – | – | 180 | 140 | 110 | 145 | 110 | 90 | – | – | – | |
| M | 1 | – | – | – | 235 | 205 | 185 | 480 | 310 | 215 | – | – | – |
| 2 | – | – | – | 210 | 180 | 150 | 325 | 205 | 145 | – | – | – | |
| 3 | – | – | – | 155 | 140 | 110 | 320 | 210 | 145 | – | – | – | |
| K | 1 | 505 | 460 | 410 | – | – | – | 220 | 185 | 155 | 145 | 110 | 90 |
| 2 | 400 | 355 | 330 | – | – | – | 180 | 145 | 125 | 150 | 120 | 85 | |
| 3 | 335 | 300 | 275 | – | – | – | 145 | 125 | 100 | 155 | 115 | 70 | |
| N | 1 | – | – | – | – | – | – | – | – | – | 1080 | 720 | 600 |
| 2 | – | – | – | – | – | – | – | – | – | 820 | 560 | 460 | |
| 3 | – | – | – | – | – | – | – | – | – | 540 | 335 | 240 | |
| S | 1 | – | – | – | 50 | 40 | 35 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 40 | 35 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | – | – | – | – | – | – | |
| 4 | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN6525 | TN6540 | TN7525 | TN7535 | WK15CM | |||||||||||
| P | 1 | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1340 | 1025 | 925 | 1790 | 1555 | 1460 | – | – | – |
| 2 | 1045 | 830 | 710 | 830 | 630 | 550 | 1025 | 830 | 710 | 1105 | 1000 | 905 | – | – | – | |
| 3 | 925 | 710 | 610 | 710 | 550 | 450 | 925 | 710 | 610 | 1000 | 905 | 805 | – | – | – | |
| 4 | 770 | 550 | 475 | 590 | 430 | 355 | 770 | 550 | 475 | 750 | 690 | 630 | – | – | – | |
| 5 | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 770 | 650 | 1025 | 905 | 830 | – | – | – | |
| 6 | 670 | 535 | 430 | 535 | 395 | 335 | 670 | 535 | 430 | 630 | 535 | 430 | – | – | – | |
| M | 1 | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | 805 | 725 | 610 | – | – | – |
| 2 | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | 725 | 630 | 550 | – | – | – | |
| 3 | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | 570 | 510 | 450 | – | – | – | |
| K | 1 | 905 | 805 | 725 | 725 | 670 | 590 | 1240 | 925 | 785 | 1165 | 1045 | 940 | 1655 | 1520 | 1340 |
| 2 | 710 | 630 | 590 | 570 | 510 | 450 | 1060 | 785 | 650 | 925 | 830 | 750 | 1320 | 1165 | 1080 | |
| 3 | 590 | 535 | 475 | 510 | 475 | 415 | 785 | 650 | 550 | 770 | 690 | 630 | 1105 | 985 | 905 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP40PM | TTI25 | THM | |||||||
| P | 1 | 1165 | 1025 | 965 | 1415 | 1180 | 985 | – | – | – |
| 2 | 985 | 845 | 710 | 1025 | 830 | 710 | – | – | – | |
| 3 | 905 | 770 | 630 | 1025 | 830 | 710 | – | – | – | |
| 4 | 805 | 670 | 535 | 865 | 710 | 590 | – | – | – | |
| 5 | 670 | 610 | 535 | 1045 | 770 | 650 | – | – | – | |
| 6 | 590 | 450 | 355 | 475 | 355 | 295 | – | – | – | |
| M | 1 | 770 | 670 | 610 | 1570 | 1025 | 710 | – | – | – |
| 2 | 690 | 590 | 490 | 1060 | 670 | 475 | – | – | – | |
| 3 | 510 | 450 | 355 | 1045 | 690 | 475 | – | – | – | |
| K | 1 | – | – | – | 725 | 610 | 510 | 475 | 355 | 295 |
| 2 | – | – | – | 590 | 475 | 415 | 490 | 395 | 275 | |
| 3 | – | – | – | 475 | 415 | 335 | 510 | 370 | 235 | |
| N | 1 | – | – | – | – | – | – | 3540 | 2365 | 1970 |
| 2 | – | – | – | – | – | – | 2695 | 1830 | 1520 | |
| 3 | – | – | – | – | – | – | 1770 | 1105 | 785 | |
| S | 1 | 155 | 140 | 120 | – | – | – | – | – | – |
| 2 | 155 | 140 | 120 | – | – | – | – | – | – | |
| 3 | 200 | 155 | 120 | – | – | – | – | – | – | |
| 4 | 260 | 200 | 140 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
.png)
