Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias

Sugerencias de productos

Product Family suggestions

WIDIA a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Pedido rápido
Artículo(s) añadido correctamente al carrito
Ver carrito

Top Drill Modular X Bodies

Seleccionar filtros
Filtros
Filtros
Ver filtros en
Metric
Inch
keyFilters
Material de la pieza de trabajo
Material de la pieza de trabajo
  • P Acero (184)
    • P1
      Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (184)
    • P2
      Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (184)
    • P3
      Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (184)
    • P4
      Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (184)
    • P5
      Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (184)
    • P6
      Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (184)
  • M Acero inoxidable (184)
    • M1
      Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (184)
    • M2
      Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (184)
    • M3
      Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (184)
  • K Fundición (184)
    • K1
      Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (184)
    • K2
      Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (184)
    • K3
      Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (184)
  • N Materiales no ferrosos (184)
    • N1
      Aluminio forjado (184)
    • N2
      Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 % (184)
    • N3
      Aleaciones de aluminio con alto contenido en silicio Si >12,2 % (184)
    • N4
      Base de cobre, latón, zinc en un rango de índice de maquinabilidad de 70–100 (184)
    • N5
      Nylon, plásticos, gomas, fenólicos, resinas y fibra de vidrio (184)
    • N6
      Carbono, compuestos de grafito, CFRP (184)
    • N7
      MMC (184)
  • S Aleaciones de alta temperatura (184)
    • S1
      Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (184)
    • S2
      Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (184)
    • S3
      Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (184)
    • S4
      Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (184)
Select All Star
  • CN (22)
  • DE (28)
  • GB (4)
  • IN (1)
  • SG (26)
  • US (10)
Aplicaciones
Aplicaciones
  • Convex Drilling Convex Drilling (184)
  • Drilling Drilling (184)
  • Inclined Entry Drilling Inclined Entry Drilling (184)
  • Inclined Exit Drilling Inclined Exit Drilling (184)
  • Stacked Plates Drilling Stacked Plates Drilling (184)
Diámetro del corte
Diámetro del corte
  • 0.63 in (10)
  • 0.638 in (10)
  • 0.641 in (10)
  • 0.65 in (10)
  • 0.656 in (10)
  • 0.669 in (10)
  • 0.672 in (10)
  • 0.689 in (10)
  • 0.69 in (10)
  • 0.694 in (10)
  • 0.702 in (10)
  • 0.704 in (10)
  • 0.709 in (10)
  • 0.719 in (10)
  • 0.728 in (10)
  • 0.734 in (10)
  • 0.74 in (10)
  • 0.748 in (10)
  • 0.75 in (10)
  • 0.756 in (10)
  • 0.759 in (10)
  • 0.766 in (10)
  • 0.768 in (10)
  • 0.776 in (10)
  • 0.781 in (10)
  • 0.787 in (10)
  • 0.791 in (10)
  • 0.795 in (10)
  • 0.797 in (10)
  • 0.799 in (10)
  • 0.803 in (10)
  • 0.807 in (10)
  • 0.811 in (10)
  • 0.814 in (10)
  • 0.816 in (10)
  • 0.82 in (10)
  • 0.824 in (10)
  • 0.828 in (10)
  • 0.844 in (10)
  • 0.846 in (10)
  • 0.866 in (10)
  • 0.875 in (10)
  • 0.884 in (10)
  • 0.886 in (10)
  • 0.906 in (10)
  • 0.925 in (10)
  • 0.937 in (10)
  • 0.946 in (10)
  • 0.965 in (10)
  • 0.969 in (10)
  • 0.984 in (10)
  • 1.0 in (10)
  • 1.004 in (10)
  • 1.012 in (10)
  • 1.014 in (10)
  • 1.016 in (10)
  • 1.024 in (10)
  • 1.032 in (10)
  • 1.039 in (10)
  • 1.043 in (10)
  • 1.047 in (10)
  • 1.063 in (10)
  • 1.083 in (10)
  • 1.094 in (10)
  • 1.102 in (10)
  • 1.109 in (10)
  • 1.122 in (10)
  • 1.125 in (10)
  • 1.143 in (10)
  • 1.156 in (10)
  • 1.161 in (10)
  • 1.172 in (10)
  • 1.181 in (10)
  • 1.188 in (10)
  • 1.201 in (10)
  • 1.219 in (10)
  • 1.22 in (10)
  • 1.24 in (10)
  • 1.25 in (10)
  • 1.26 in (6)
  • 1.28 in (6)
  • 1.299 in (6)
  • 1.313 in (6)
  • 1.339 in (6)
  • 1.344 in (6)
  • 1.375 in (6)
  • 1.379 in (6)
  • 1.399 in (6)
  • 1.417 in (6)
  • 1.437 in (6)
  • 1.457 in (6)
  • 1.476 in (6)
  • 1.496 in (6)
  • 1.5 in (6)
  • 1.508 in (6)
  • 1.516 in (6)
  • 1.536 in (6)
  • 1.547 in (6)
  • 1.555 in (6)
  • 1.575 in (6)
Diámetro del corte Min a Diámetro del corte Max
Diámetro del corte
Diámetro del corte
  • 16.0 mm (10)
  • 16.2 mm (10)
  • 16.276 mm (10)
  • 16.5 mm (10)
  • 16.675 mm (10)
  • 17.0 mm (10)
  • 17.075 mm (10)
  • 17.475 mm (10)
  • 17.5 mm (10)
  • 17.6 mm (10)
  • 17.8 mm (10)
  • 17.85 mm (10)
  • 18.0 mm (10)
  • 18.25 mm (10)
  • 18.5 mm (10)
  • 18.651 mm (10)
  • 18.8 mm (10)
  • 19.0 mm (10)
  • 19.05 mm (10)
  • 19.201 mm (10)
  • 19.276 mm (10)
  • 19.451 mm (10)
  • 19.5 mm (10)
  • 19.701 mm (10)
  • 19.85 mm (10)
  • 20.0 mm (10)
  • 20.1 mm (10)
  • 20.201 mm (10)
  • 20.25 mm (10)
  • 20.3 mm (10)
  • 20.401 mm (10)
  • 20.5 mm (10)
  • 20.6 mm (10)
  • 20.651 mm (10)
  • 20.701 mm (10)
  • 20.8 mm (10)
  • 20.901 mm (10)
  • 21.0 mm (10)
  • 21.425 mm (10)
  • 21.5 mm (10)
  • 22.0 mm (10)
  • 22.225 mm (10)
  • 22.451 mm (10)
  • 22.5 mm (10)
  • 23.0 mm (10)
  • 23.5 mm (10)
  • 23.8 mm (10)
  • 24.0 mm (10)
  • 24.5 mm (10)
  • 24.6 mm (10)
  • 25.0 mm (10)
  • 25.401 mm (10)
  • 25.5 mm (10)
  • 25.675 mm (10)
  • 25.701 mm (10)
  • 25.75 mm (10)
  • 25.8 mm (10)
  • 26.0 mm (10)
  • 26.201 mm (10)
  • 26.401 mm (10)
  • 26.5 mm (10)
  • 26.6 mm (10)
  • 27.0 mm (10)
  • 27.5 mm (10)
  • 27.776 mm (10)
  • 28.0 mm (10)
  • 28.175 mm (10)
  • 28.5 mm (10)
  • 28.576 mm (10)
  • 29.0 mm (10)
  • 29.375 mm (10)
  • 29.5 mm (10)
  • 29.776 mm (10)
  • 30.0 mm (10)
  • 30.175 mm (10)
  • 30.5 mm (10)
  • 30.951 mm (10)
  • 31.0 mm (10)
  • 31.5 mm (10)
  • 31.75 mm (10)
  • 32.0 mm (6)
  • 32.5 mm (6)
  • 33.0 mm (6)
  • 33.35 mm (6)
  • 34.0 mm (6)
  • 34.125 mm (6)
  • 34.926 mm (6)
  • 35.0 mm (6)
  • 35.5 mm (6)
  • 36.0 mm (6)
  • 36.5 mm (6)
  • 37.0 mm (6)
  • 37.5 mm (6)
  • 38.0 mm (6)
  • 38.1 mm (6)
  • 38.301 mm (6)
  • 38.5 mm (6)
  • 39.0 mm (6)
  • 39.301 mm (6)
  • 39.5 mm (6)
  • 40.0 mm (6)
Diámetro del corte Min a Diámetro del corte Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 51.0 mm (2)
  • 54.0 mm (2)
  • 57.0 mm (2)
  • 60.0 mm (2)
  • 63.0 mm (2)
  • 66.0 mm (2)
  • 69.0 mm (2)
  • 72.0 mm (2)
  • 75.0 mm (2)
  • 78.0 mm (2)
  • 81.0 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 87.0 mm (2)
  • 90.0 mm (4)
  • 93.0 mm (2)
  • 95.0 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 102.0 mm (2)
  • 105.0 mm (2)
  • 108.0 mm (2)
  • 110.0 mm (2)
  • 114.0 mm (2)
  • 115.0 mm (2)
  • 120.0 mm (4)
  • 125.0 mm (2)
  • 130.0 mm (2)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 140.0 mm (2)
  • 144.0 mm (2)
  • 145.0 mm (2)
  • 150.0 mm (2)
  • 152.0 mm (2)
  • 155.0 mm (2)
  • 160.0 mm (4)
  • 168.0 mm (2)
  • 170.0 mm (2)
  • 176.0 mm (2)
  • 180.0 mm (2)
  • 184.0 mm (2)
  • 190.0 mm (2)
  • 192.0 mm (2)
  • 200.0 mm (4)
  • 204.0 mm (2)
  • 208.0 mm (2)
  • 216.0 mm (4)
  • 224.0 mm (2)
  • 228.0 mm (2)
  • 232.0 mm (2)
  • 240.0 mm (4)
  • 248.0 mm (2)
  • 252.0 mm (2)
  • 256.0 mm (2)
  • 264.0 mm (2)
  • 272.0 mm (2)
  • 276.0 mm (2)
  • 288.0 mm (4)
  • 300.0 mm (2)
  • 304.0 mm (2)
  • 312.0 mm (2)
  • 320.0 mm (2)
  • 324.0 mm (2)
  • 336.0 mm (2)
  • 348.0 mm (2)
  • 360.0 mm (2)
  • 372.0 mm (2)
  • 384.0 mm (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Profundidad de taladrado máxima [L4]
Profundidad de taladrado máxima [L4]
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.496 in (2)
  • 1.536 in (2)
  • 1.614 in (2)
  • 1.655 in (2)
  • 1.732 in (2)
  • 1.772 in (2)
  • 1.85 in (2)
  • 1.891 in (2)
  • 2.008 in (2)
  • 2.126 in (2)
  • 2.244 in (2)
  • 2.362 in (2)
  • 2.48 in (2)
  • 2.598 in (2)
  • 2.717 in (2)
  • 2.835 in (2)
  • 2.953 in (2)
  • 3.071 in (2)
  • 3.189 in (2)
  • 3.307 in (2)
  • 3.346 in (2)
  • 3.426 in (2)
  • 3.543 in (4)
  • 3.661 in (2)
  • 3.74 in (2)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.016 in (2)
  • 4.134 in (2)
  • 4.252 in (2)
  • 4.331 in (2)
  • 4.488 in (2)
  • 4.529 in (2)
  • 4.724 in (4)
  • 4.921 in (2)
  • 5.118 in (2)
  • 5.315 in (2)
  • 5.354 in (2)
  • 5.513 in (2)
  • 5.67 in (2)
  • 5.71 in (2)
  • 5.906 in (2)
  • 5.984 in (2)
  • 6.102 in (2)
  • 6.299 in (4)
  • 6.614 in (2)
  • 6.694 in (2)
  • 6.929 in (2)
  • 7.087 in (2)
  • 7.244 in (2)
  • 7.48 in (2)
  • 7.559 in (2)
  • 7.875 in (4)
  • 8.031 in (2)
  • 8.189 in (2)
  • 8.504 in (4)
  • 8.819 in (2)
  • 8.976 in (2)
  • 9.134 in (2)
  • 9.449 in (4)
  • 9.764 in (2)
  • 9.921 in (2)
  • 10.079 in (2)
  • 10.394 in (2)
  • 10.709 in (2)
  • 10.866 in (2)
  • 11.339 in (4)
  • 11.811 in (2)
  • 11.969 in (2)
  • 12.283 in (2)
  • 12.598 in (2)
  • 12.756 in (2)
  • 13.228 in (2)
  • 13.701 in (2)
  • 14.173 in (2)
  • 14.646 in (2)
  • 15.118 in (2)
Profundidad de taladrado máxima [L4] Min a Profundidad de taladrado máxima [L4] Max
Estilo de conexión
Estilo de conexión
  • Cylindrical Shank 1 Flat (152)
  • Straight-Cylindrical w/Flange (32)
Longitud total [L]
Longitud total [L]
  • 4.173 in (2)
  • 4.291 in (2)
  • 4.646 in (2)
  • 4.764 in (2)
  • 4.882 in (2)
  • 5.0 in (2)
  • 5.118 in (2)
  • 5.157 in (2)
  • 5.236 in (2)
  • 5.354 in (2)
  • 5.513 in (2)
  • 5.63 in (2)
  • 5.748 in (4)
  • 5.867 in (2)
  • 5.945 in (2)
  • 5.984 in (2)
  • 6.102 in (4)
  • 6.22 in (2)
  • 6.299 in (2)
  • 6.339 in (2)
  • 6.457 in (2)
  • 6.496 in (2)
  • 6.654 in (2)
  • 6.772 in (2)
  • 6.969 in (2)
  • 7.165 in (2)
  • 7.244 in (2)
  • 7.323 in (2)
  • 7.521 in (4)
  • 7.678 in (2)
  • 7.756 in (2)
  • 7.875 in (2)
  • 8.031 in (4)
  • 8.228 in (2)
  • 8.268 in (2)
  • 8.504 in (2)
  • 8.544 in (2)
  • 8.898 in (2)
  • 8.937 in (2)
  • 8.976 in (2)
  • 9.214 in (2)
  • 9.331 in (2)
  • 9.449 in (2)
  • 9.488 in (2)
  • 9.685 in (2)
  • 9.724 in (2)
  • 9.882 in (2)
  • 9.961 in (2)
  • 10.039 in (2)
  • 10.236 in (4)
  • 10.472 in (2)
  • 10.63 in (2)
  • 10.749 in (2)
  • 10.984 in (2)
  • 11.182 in (2)
  • 11.378 in (2)
  • 11.654 in (2)
  • 11.733 in (2)
  • 11.89 in (2)
  • 12.166 in (2)
  • 12.283 in (2)
  • 12.48 in (2)
  • 12.638 in (2)
  • 12.677 in (2)
  • 13.031 in (4)
  • 13.189 in (2)
  • 13.387 in (2)
  • 13.544 in (2)
  • 13.781 in (2)
  • 14.094 in (2)
  • 14.134 in (2)
  • 14.528 in (2)
  • 14.606 in (2)
  • 15.157 in (2)
  • 15.669 in (2)
  • 15.827 in (2)
  • 16.378 in (2)
  • 16.417 in (2)
  • 16.89 in (2)
  • 17.165 in (2)
  • 17.441 in (2)
  • 17.913 in (2)
  • 17.953 in (2)
  • 18.504 in (2)
  • 19.017 in (2)
  • 19.567 in (2)
Longitud total [L] Min a Longitud total [L] Max
Longitud total [L]
Longitud total [L]
  • 106.0 mm (2)
  • 109.0 mm (2)
  • 118.0 mm (2)
  • 121.0 mm (2)
  • 124.0 mm (2)
  • 127.0 mm (2)
  • 130.0 mm (2)
  • 131.0 mm (2)
  • 133.0 mm (2)
  • 136.0 mm (2)
  • 140.0 mm (2)
  • 143.0 mm (2)
  • 146.0 mm (4)
  • 149.0 mm (2)
  • 151.0 mm (2)
  • 152.0 mm (2)
  • 155.0 mm (4)
  • 158.0 mm (2)
  • 160.0 mm (2)
  • 161.0 mm (2)
  • 164.0 mm (2)
  • 165.0 mm (2)
  • 169.0 mm (2)
  • 172.0 mm (2)
  • 177.0 mm (2)
  • 182.0 mm (2)
  • 184.0 mm (2)
  • 186.0 mm (2)
  • 191.0 mm (4)
  • 195.0 mm (2)
  • 197.0 mm (2)
  • 200.0 mm (2)
  • 204.0 mm (4)
  • 209.0 mm (2)
  • 210.0 mm (2)
  • 216.0 mm (2)
  • 217.0 mm (2)
  • 226.0 mm (2)
  • 227.0 mm (2)
  • 228.0 mm (2)
  • 234.0 mm (2)
  • 237.0 mm (2)
  • 240.0 mm (2)
  • 241.0 mm (2)
  • 246.0 mm (2)
  • 247.0 mm (2)
  • 251.0 mm (2)
  • 253.0 mm (2)
  • 255.0 mm (2)
  • 260.0 mm (4)
  • 266.0 mm (2)
  • 270.0 mm (2)
  • 273.0 mm (2)
  • 279.0 mm (2)
  • 284.0 mm (2)
  • 289.0 mm (2)
  • 296.0 mm (2)
  • 298.0 mm (2)
  • 302.0 mm (2)
  • 309.0 mm (2)
  • 312.0 mm (2)
  • 317.0 mm (2)
  • 321.0 mm (2)
  • 322.0 mm (2)
  • 331.0 mm (4)
  • 335.0 mm (2)
  • 340.0 mm (2)
  • 344.0 mm (2)
  • 350.0 mm (2)
  • 358.0 mm (2)
  • 359.0 mm (2)
  • 369.0 mm (2)
  • 371.0 mm (2)
  • 385.0 mm (2)
  • 398.0 mm (2)
  • 402.0 mm (2)
  • 416.0 mm (2)
  • 417.0 mm (2)
  • 429.0 mm (2)
  • 436.0 mm (2)
  • 443.0 mm (2)
  • 455.0 mm (2)
  • 456.0 mm (2)
  • 470.0 mm (2)
  • 483.0 mm (2)
  • 497.0 mm (2)
Longitud total [L] Min a Longitud total [L] Max
application
Calidad de herramienta de corte
Calidad de herramienta de corte
  • WM15PD (184)
  • WP40PD (184)
frontEnd
Ángulo de la punta
Ángulo de la punta
  • 140.0 (184)
  • 150.0 (184)
Ángulo de la punta Min a Ángulo de la punta Max
backEnd
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 19.05 mm (10)
  • 20.0 mm (10)
  • 25.0 mm (30)
  • 25.401 mm (30)
  • 31.75 mm (40)
  • 32.0 mm (40)
  • 38.1 mm (12)
  • 40.0 mm (12)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
Diámetro de extremo posterior
Diámetro de extremo posterior
  • 0.75 in (10)
  • 0.787 in (10)
  • 0.984 in (30)
  • 1.0 in (30)
  • 1.25 in (40)
  • 1.26 in (40)
  • 1.5 in (12)
  • 1.575 in (12)
Diámetro de extremo posterior Min a Diámetro de extremo posterior Max
No filters matching ""

TOP DRILL™ Modular X • 3 x D • Mango de bloqueo lateral • Sistema métrico

(20) TOP DRILL™ Modular X • 3 x D • Mango de bloqueo lateral • Sistema métrico

TOP DRILL™ Modular X • 5 x D • Mango de bloqueo lateral • Sistema métrico

(20) TOP DRILL™ Modular X • 5 x D • Mango de bloqueo lateral • Sistema métrico

TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch

(20) TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch

TOP DRILL™ Modular X • 5 x D • Side Lock Shank • Inch

(20) TOP DRILL™ Modular X • 5 x D • Side Lock Shank • Inch

TOP DRILL™ Modular X • 8 x D • Side Lock Shank • Inch

(20) TOP DRILL™ Modular X • 8 x D • Side Lock Shank • Inch

TOP DRILL™ Modular X • 8 x D • Mango de bloqueo lateral • Sistema métrico

(20) TOP DRILL™ Modular X • 8 x D • Mango de bloqueo lateral • Sistema métrico

TOP DRILL™ Modular X • 1.5 x D • Side Lock Shank • Inch

(16) TOP DRILL™ Modular X • 1.5 x D • Side Lock Shank • Inch

TOP DRILL™ Modular X • 1,5 x D • Mango de bloqueo lateral • Sistema métrico

(16) TOP DRILL™ Modular X • 1,5 x D • Mango de bloqueo lateral • Sistema métrico

TOP DRILL™ Modular X • 12 x D • Mango redondo con brida • Sistema métrico

(16) TOP DRILL™ Modular X • 12 x D • Mango redondo con brida • Sistema métrico

TOP DRILL™ Modular X • 12 x D • Flanged Round Shank • Inch

(16) TOP DRILL™ Modular X • 12 x D • Flanged Round Shank • Inch
Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
product-image
Please adjust the following properties from

ISO catálogo

ANSI catálogo

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Debe iniciar sesión para ver la información de su panel de control
Session expired due to inactivity, please login again
El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
artículo(s) añadido(s) correctamente al carrito
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO catálogo Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Gracias por haberse registrado correctamente. Usted dispone ahora de acceso inmediato para conectarse y utilizar la página web.

You are about to leave the Solution building process.

Are you sure you want to leave?