Solicitar Productos Online
successfully added to cart
View Cart
COVID-19: Como está respondiendo WIDIA

Sepa más

Top Drill S™ • Stainless Steel

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (678)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (678)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (678)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (678)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (678)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (678)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (678)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (678)
  • M Stainless Steel (678)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (678)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (678)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (678)
  • S High-Temp Alloys (678)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (678)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (678)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (678)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (678)
Select First Choice
  • CN (1)
  • DE (3)
Applications
  • Convex Drilling Convex Drilling (678)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (678)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (678)
  • Counterboring Counterboring (678)
  • Countersinking Countersinking (678)
  • Drilling Drilling (678)
  • Flat Bottom Drilling Flat Bottom Drilling (678)
  • Inclined Entry Drilling Inclined Entry Drilling (678)
  • Inclined Exit Drilling Inclined Exit Drilling (678)
  • Pre-Condition Pre-Condition (678)
  • Stacked Plates Drilling Stacked Plates Drilling (678)
  • X-Offset Drilling X-Offset Drilling (678)
Cutting Diameter
  • 3.0 (3)
  • 3.048 (3)
  • 3.1 (3)
  • 3.175 (3)
  • 3.2 (3)
  • 3.264 (3)
  • 3.3 (3)
  • 3.4 (3)
  • 3.455 (3)
  • 3.5 (3)
  • 3.571 (3)
  • 3.6 (3)
  • 3.658 (3)
  • 3.7 (3)
  • 3.734 (3)
  • 3.8 (3)
  • 3.9 (3)
  • 3.97 (3)
  • 4.0 (3)
  • 4.039 (3)
  • 4.09 (3)
  • 4.1 (3)
  • 4.2 (3)
  • 4.217 (3)
  • 4.3 (3)
  • 4.3656 (3)
  • 4.4 (3)
  • 4.5 (3)
  • 4.6 (3)
  • 4.623 (3)
  • 4.7 (3)
  • 4.763 (3)
  • 4.8 (3)
  • 4.852 (3)
  • 4.9 (3)
  • 5.0 (3)
  • 5.1 (3)
  • 5.106 (3)
  • 5.1594 (3)
  • 5.2 (3)
  • 5.3 (3)
  • 5.4 (3)
  • 5.41 (3)
  • 5.5 (3)
  • 5.558 (3)
  • 5.6 (3)
  • 5.616 (3)
  • 5.7 (3)
  • 5.8 (3)
  • 5.9 (3)
  • 5.954 (3)
  • 6.0 (3)
  • 6.1 (3)
  • 6.2 (3)
  • 6.3 (3)
  • 6.35 (3)
  • 6.4 (3)
  • 6.5 (3)
  • 6.528 (3)
  • 6.6 (3)
  • 6.63 (3)
  • 6.7 (3)
  • 6.746 (3)
  • 6.8 (3)
  • 6.9 (3)
  • 7.0 (3)
  • 7.1 (3)
  • 7.145 (3)
  • 7.2 (3)
  • 7.3 (3)
  • 7.4 (3)
  • 7.5 (3)
  • 7.5406 (3)
  • 7.6 (3)
  • 7.7 (3)
  • 7.8 (3)
  • 7.9 (3)
  • 7.9375 (2)
  • 7.938 (1)
  • 8.0 (3)
  • 8.1 (3)
  • 8.2 (3)
  • 8.3 (3)
  • 8.3344 (3)
  • 8.4 (3)
  • 8.433 (3)
  • 8.5 (3)
  • 8.6 (3)
  • 8.7 (3)
  • 8.733 (3)
  • 8.8 (3)
  • 8.9 (3)
  • 9.0 (3)
  • 9.1 (3)
  • 9.129 (3)
  • 9.2 (3)
  • 9.3 (3)
  • 9.347 (3)
  • 9.4 (3)
  • 9.5 (3)
  • 9.525 (3)
  • 9.6 (3)
  • 9.7 (3)
  • 9.8 (3)
  • 9.9 (3)
  • 9.921 (3)
  • 10.0 (3)
  • 10.1 (3)
  • 10.2 (3)
  • 10.3 (3)
  • 10.32 (3)
  • 10.4 (3)
  • 10.5 (3)
  • 10.6 (3)
  • 10.7 (3)
  • 10.7156 (3)
  • 10.8 (3)
  • 10.9 (3)
  • 11.0 (3)
  • 11.1 (3)
  • 11.113 (3)
  • 11.2 (3)
  • 11.3 (3)
  • 11.4 (3)
  • 11.5 (3)
  • 11.5094 (3)
  • 11.6 (3)
  • 11.7 (3)
  • 11.8 (3)
  • 11.9 (3)
  • 11.908 (3)
  • 12.0 (3)
  • 12.1 (3)
  • 12.2 (3)
  • 12.3 (3)
  • 12.304 (3)
  • 12.4 (3)
  • 12.5 (3)
  • 12.6 (3)
  • 12.7 (3)
  • 12.8 (3)
  • 12.9 (3)
  • 13.0 (3)
  • 13.096 (3)
  • 13.1 (3)
  • 13.2 (3)
  • 13.3 (3)
  • 13.4 (3)
  • 13.5 (3)
  • 13.6 (3)
  • 13.7 (3)
  • 13.8 (3)
  • 13.8906 (3)
  • 13.9 (3)
  • 14.0 (3)
  • 14.1 (3)
  • 14.2 (3)
  • 14.288 (3)
  • 14.3 (3)
  • 14.4 (3)
  • 14.5 (3)
  • 14.6 (3)
  • 14.6844 (3)
  • 14.7 (3)
  • 14.8 (3)
  • 14.9 (3)
  • 15.0 (3)
  • 15.083 (3)
  • 15.1 (3)
  • 15.2 (3)
  • 15.3 (3)
  • 15.4 (3)
  • 15.479 (3)
  • 15.5 (3)
  • 15.6 (3)
  • 15.7 (3)
  • 15.8 (3)
  • 15.875 (3)
  • 15.9 (3)
  • 16.0 (3)
  • 16.1 (3)
  • 16.2 (3)
  • 16.271 (3)
  • 16.3 (3)
  • 16.4 (3)
  • 16.5 (3)
  • 16.6 (3)
  • 16.67 (3)
  • 16.7 (3)
  • 16.8 (3)
  • 16.9 (3)
  • 17.0 (3)
  • 17.1 (3)
  • 17.2 (3)
  • 17.3 (3)
  • 17.4 (3)
  • 17.463 (3)
  • 17.5 (3)
  • 17.6 (3)
  • 17.7 (3)
  • 17.8 (3)
  • 17.8594 (3)
  • 17.9 (3)
  • 18.0 (3)
  • 18.1 (3)
  • 18.2 (3)
  • 18.258 (3)
  • 18.3 (3)
  • 18.4 (3)
  • 18.5 (3)
  • 18.6 (3)
  • 18.654 (3)
  • 18.7 (3)
  • 18.8 (3)
  • 18.9 (3)
  • 19.0 (3)
  • 19.05 (3)
  • 19.1 (3)
  • 19.2 (3)
  • 19.3 (3)
  • 19.4 (3)
  • 19.5 (3)
  • 19.6 (3)
  • 19.7 (3)
  • 19.8 (3)
  • 19.9 (3)
  • 20.0 (3)
to
Cutting Diameter
  • 0.1181 (3)
  • 0.12 (3)
  • 0.122 (3)
  • 0.125 (3)
  • 0.126 (3)
  • 0.1285 (3)
  • 0.1299 (3)
  • 0.1339 (3)
  • 0.136 (3)
  • 0.1378 (3)
  • 0.1406 (3)
  • 0.1417 (3)
  • 0.144 (3)
  • 0.1457 (3)
  • 0.147 (3)
  • 0.1496 (3)
  • 0.1535 (3)
  • 0.1563 (3)
  • 0.1575 (3)
  • 0.159 (3)
  • 0.161 (3)
  • 0.1614 (3)
  • 0.1654 (3)
  • 0.166 (3)
  • 0.1693 (3)
  • 0.1719 (3)
  • 0.1732 (3)
  • 0.1772 (3)
  • 0.1811 (3)
  • 0.182 (3)
  • 0.185 (3)
  • 0.1875 (3)
  • 0.189 (3)
  • 0.191 (3)
  • 0.1929 (3)
  • 0.1969 (3)
  • 0.2008 (3)
  • 0.201 (3)
  • 0.2031 (3)
  • 0.2047 (3)
  • 0.2087 (3)
  • 0.2126 (3)
  • 0.213 (3)
  • 0.2165 (3)
  • 0.2188 (3)
  • 0.2205 (3)
  • 0.2211 (3)
  • 0.2244 (3)
  • 0.2283 (3)
  • 0.2323 (3)
  • 0.2344 (3)
  • 0.2362 (3)
  • 0.2402 (3)
  • 0.2441 (3)
  • 0.248 (3)
  • 0.25 (3)
  • 0.252 (3)
  • 0.2559 (3)
  • 0.257 (3)
  • 0.2598 (3)
  • 0.261 (3)
  • 0.2638 (3)
  • 0.2656 (3)
  • 0.2677 (3)
  • 0.2717 (3)
  • 0.2756 (3)
  • 0.2795 (3)
  • 0.2813 (3)
  • 0.2835 (3)
  • 0.2874 (3)
  • 0.2913 (3)
  • 0.2953 (3)
  • 0.2969 (3)
  • 0.2992 (3)
  • 0.3031 (3)
  • 0.3071 (3)
  • 0.311 (3)
  • 0.3125 (3)
  • 0.315 (3)
  • 0.3189 (3)
  • 0.3228 (3)
  • 0.3268 (3)
  • 0.3281 (3)
  • 0.3307 (3)
  • 0.332 (3)
  • 0.3346 (3)
  • 0.3386 (3)
  • 0.3425 (3)
  • 0.3438 (3)
  • 0.3465 (3)
  • 0.3504 (3)
  • 0.3543 (3)
  • 0.3583 (3)
  • 0.3594 (3)
  • 0.3622 (3)
  • 0.3661 (3)
  • 0.368 (3)
  • 0.3701 (3)
  • 0.374 (3)
  • 0.375 (3)
  • 0.378 (3)
  • 0.3819 (3)
  • 0.3858 (3)
  • 0.3898 (3)
  • 0.3906 (3)
  • 0.3937 (3)
  • 0.3976 (3)
  • 0.4016 (3)
  • 0.4055 (3)
  • 0.4063 (3)
  • 0.4094 (3)
  • 0.4134 (3)
  • 0.4173 (3)
  • 0.4213 (3)
  • 0.4219 (3)
  • 0.4252 (3)
  • 0.4291 (3)
  • 0.4331 (3)
  • 0.437 (3)
  • 0.4375 (3)
  • 0.4409 (3)
  • 0.4449 (3)
  • 0.4488 (3)
  • 0.4528 (3)
  • 0.4531 (3)
  • 0.4567 (3)
  • 0.4606 (3)
  • 0.4646 (3)
  • 0.4685 (3)
  • 0.4688 (3)
  • 0.4724 (3)
  • 0.4764 (3)
  • 0.4803 (3)
  • 0.4843 (3)
  • 0.4844 (3)
  • 0.4882 (3)
  • 0.4921 (3)
  • 0.4961 (3)
  • 0.5 (3)
  • 0.5039 (3)
  • 0.5079 (3)
  • 0.5118 (3)
  • 0.5156 (3)
  • 0.5157 (3)
  • 0.5197 (3)
  • 0.5236 (3)
  • 0.5276 (3)
  • 0.5315 (3)
  • 0.5354 (3)
  • 0.5394 (3)
  • 0.5433 (3)
  • 0.5469 (3)
  • 0.5472 (3)
  • 0.5512 (3)
  • 0.5551 (3)
  • 0.5591 (3)
  • 0.5625 (3)
  • 0.563 (3)
  • 0.5669 (3)
  • 0.5709 (3)
  • 0.5748 (3)
  • 0.5781 (3)
  • 0.5787 (3)
  • 0.5827 (3)
  • 0.5866 (3)
  • 0.5906 (3)
  • 0.5938 (3)
  • 0.5945 (3)
  • 0.5984 (3)
  • 0.6024 (3)
  • 0.6063 (3)
  • 0.6094 (3)
  • 0.6102 (3)
  • 0.6142 (3)
  • 0.6181 (3)
  • 0.622 (3)
  • 0.625 (3)
  • 0.626 (3)
  • 0.6299 (3)
  • 0.6339 (3)
  • 0.6378 (3)
  • 0.6406 (3)
  • 0.6417 (3)
  • 0.6457 (3)
  • 0.6496 (3)
  • 0.6535 (3)
  • 0.6563 (3)
  • 0.6575 (3)
  • 0.6614 (3)
  • 0.6654 (3)
  • 0.6693 (3)
  • 0.6732 (3)
  • 0.6772 (3)
  • 0.6811 (3)
  • 0.685 (3)
  • 0.6875 (3)
  • 0.689 (3)
  • 0.6929 (3)
  • 0.6969 (3)
  • 0.7008 (3)
  • 0.7031 (3)
  • 0.7047 (3)
  • 0.7087 (3)
  • 0.7126 (3)
  • 0.7165 (3)
  • 0.7188 (3)
  • 0.7205 (3)
  • 0.7244 (3)
  • 0.7283 (3)
  • 0.7323 (3)
  • 0.7344 (3)
  • 0.7362 (3)
  • 0.7402 (3)
  • 0.7441 (3)
  • 0.748 (3)
  • 0.75 (3)
  • 0.752 (3)
  • 0.7559 (3)
  • 0.7598 (3)
  • 0.7638 (3)
  • 0.7677 (3)
  • 0.7717 (3)
  • 0.7756 (3)
  • 0.7795 (3)
  • 0.7835 (3)
  • 0.7874 (3)
to
Maximum Hole Depth [L4]
  • 0.55 (15)
  • 0.67 (16)
  • 0.79 (21)
  • 0.91 (15)
  • 0.94 (13)
  • 0.9449 (1)
  • 1.14 (29)
  • 1.3 (15)
  • 1.378 (2)
  • 1.38 (46)
  • 1.57 (25)
  • 1.61 (16)
  • 1.69 (50)
  • 1.77 (23)
  • 1.7717 (2)
  • 1.89 (21)
  • 1.93 (27)
  • 2.01 (24)
  • 2.17 (23)
  • 2.2 (25)
  • 2.24 (14)
  • 2.36 (23)
  • 2.48 (25)
  • 2.52 (13)
  • 2.8 (24)
  • 3.03 (23)
  • 3.15 (27)
  • 3.78 (25)
  • 4.41 (23)
  • 5.04 (25)
  • 5.6693 (12)
  • 5.67 (12)
  • 6.3 (23)
to
Maximum Hole Depth [L4]
  • 14.0 (15)
  • 17.0 (16)
  • 20.0 (21)
  • 23.0 (15)
  • 24.0 (14)
  • 29.0 (29)
  • 33.0 (15)
  • 35.0 (48)
  • 40.0 (25)
  • 41.0 (16)
  • 43.0 (50)
  • 45.0 (25)
  • 48.0 (21)
  • 49.0 (27)
  • 51.0 (24)
  • 55.0 (23)
  • 56.0 (25)
  • 57.0 (14)
  • 60.0 (23)
  • 63.0 (25)
  • 64.0 (13)
  • 71.0 (24)
  • 77.0 (23)
  • 80.0 (27)
  • 96.0 (25)
  • 112.0 (23)
  • 128.0 (25)
  • 144.0 (24)
  • 160.0 (23)
to
Reach
  • 20.0 (15)
  • 24.0 (16)
  • 28.0 (36)
  • 34.0 (14)
  • 36.0 (16)
  • 40.0 (15)
  • 41.0 (13)
  • 44.0 (21)
  • 47.0 (27)
  • 49.0 (16)
  • 53.0 (27)
  • 55.0 (25)
  • 56.0 (21)
  • 60.0 (23)
  • 61.0 (27)
  • 65.0 (25)
  • 67.0 (14)
  • 71.0 (25)
  • 73.0 (24)
  • 74.0 (13)
  • 77.0 (23)
  • 79.0 (23)
  • 83.0 (25)
  • 92.0 (27)
  • 93.0 (24)
  • 101.0 (23)
  • 110.0 (25)
  • 128.0 (23)
  • 146.0 (25)
  • 163.0 (24)
  • 181.0 (23)
to
Reach
  • 0.79 (15)
  • 0.94 (16)
  • 1.1 (36)
  • 1.3386 (1)
  • 1.34 (13)
  • 1.42 (16)
  • 1.57 (15)
  • 1.61 (13)
  • 1.73 (19)
  • 1.7323 (2)
  • 1.85 (27)
  • 1.9291 (1)
  • 1.93 (15)
  • 2.09 (27)
  • 2.17 (25)
  • 2.2 (21)
  • 2.36 (23)
  • 2.4 (27)
  • 2.5591 (3)
  • 2.56 (22)
  • 2.64 (14)
  • 2.8 (25)
  • 2.87 (24)
  • 2.91 (13)
  • 3.03 (23)
  • 3.11 (23)
  • 3.27 (25)
  • 3.62 (27)
  • 3.66 (24)
  • 3.98 (23)
  • 4.33 (25)
  • 5.04 (23)
  • 5.75 (25)
  • 6.4173 (12)
  • 6.42 (12)
  • 7.13 (23)
to
Connection Style
  • Straight-Cylindrical (678)
Number of Flutes
  • 2 (678)
application
Coating
  • AlTiN (674)
  • TiAlN (4)
Grade Of Cutting Tool
  • WM15PD (678)
Hand Of Tool
  • R (678)
Drill Type
  • 81-01 (678)
frontEnd
Point Angle
  • 140.0 (678)
to
backEnd
Connection Type
  • CYLINDRICAL (678)
Back-End Diameter
  • 0.2362 (156)
  • 0.315 (81)
  • 0.3937 (81)
  • 0.4724 (75)
  • 0.5512 (69)
  • 0.6299 (75)
  • 0.7087 (72)
  • 0.7874 (69)
to