| Número de material SAP | 5649102 |
| Número de catálogo ISO | SNMX150612ZNSNMM |
| Número de catálogo ANSI | SNMX150612ZNSNMM |
| Calidad | WK15CM |
| Filos de corte por plaquita | 8 |
| Tamaño IC de plaquita [D] | 15.8750 mm |
| Tamaño IC de plaquita [D] | .6250 in |
| Longitud de filo de corte de plaquita [L10] | 15.8750 mm |
| Longitud de filo de corte de plaquita [L10] | .6250 in |
| Grosor de plaquita [S] | 6.3500 mm |
| Grosor de plaquita [S] | .2500 in |
| Longitud de cara de esquina [BS] | 2.3690 mm |
| Longitud de cara de esquina [BS] | .0933 in |
| Radio de esquina [Rε] | 1.2000 mm |
| Radio de esquina [Rε] | .0472 in |
| Grosor medio de las virutas [HM] | 0.0500 mm |
| Grosor medio de las virutas [HM] | .0020 in |
| Light Machining | General Purpose | Heavy Machining | ||||
| Material Group | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P3–P4 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P5–P6 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| M3 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| K1–K2 | .S..MM | WK15CM | .S..MM | WK15CM | .S..MM | WU20PM |
| K3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WK15CM |
| N1–N2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| N3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S1–S2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S4 | .S..MM | WP35CM | .S..MM | WU20PM | .S..MM | WU20PM |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..MM | 0,22 | 0,65 | 1,07 | 0,16 | 0,47 | 0,77 | 0,12 | 0,35 | 0,58 | 0,10 | 0,31 | 0,50 | 0,10 | 0,28 | 0,46 | .S..MM |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40-100% | ||||||||||||
| .S..MM | .008 | .026 | .042 | .006 | .018 | .030 | .005 | .014 | .023 | .004 | .012 | .020 | .004 | .011 | .018 | .S..MM |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 455 | 395 | 370 | — | — | — | 330 | 290 | 270 |
| 2 | 280 | 255 | 230 | — | — | — | 275 | 250 | 200 | |
| 3 | 255 | 230 | 205 | — | — | — | 255 | 220 | 175 | |
| 4 | 190 | 175 | 160 | — | — | — | 225 | 190 | 150 | |
| 5 | 260 | 230 | 210 | — | — | — | 185 | 175 | 150 | |
| 6 | 160 | 135 | — | — | — | — | 165 | 130 | 100 | |
| M | 1 | 205 | 185 | 155 | — | — | — | 205 | 180 | 165 |
| 2 | 185 | 160 | 140 | — | — | — | 185 | 160 | 130 | |
| 3 | 145 | 130 | 115 | — | — | — | 140 | 120 | 95 | |
| K | 1 | 295 | 265 | 240 | 420 | 385 | 340 | 250 | 220 | 185 |
| 2 | 235 | 210 | 190 | 335 | 295 | 275 | 200 | 180 | 150 | |
| 3 | 195 | 175 | 160 | 280 | 250 | 230 | 180 | 150 | 120 | |
| N | 1 | — | — | — | — | — | — | 550 | 470 | 400 |
| 2 | — | — | — | — | — | — | 550 | 470 | 400 | |
| 3 | — | — | — | — | — | — | 400 | 350 | 300 | |
| S | 1 | — | — | — | — | — | — | 40 | 35 | 25 |
| 2 | — | — | — | — | — | — | 40 | 35 | 25 | |
| 3 | — | — | — | — | — | — | 50 | 40 | 25 | |
| 4 | — | — | — | — | — | — | 70 | 50 | 35 | |
| H | 1 | — | — | — | — | — | — | 110 | 80 | 70 |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 1490 | 1300 | 1210 | — | — | — | 1080 | 950 | 890 |
| 2 | 920 | 840 | 750 | — | — | — | 900 | 820 | 660 | |
| 3 | 840 | 750 | 670 | — | — | — | 840 | 720 | 570 | |
| 4 | 620 | 570 | 520 | — | — | — | 740 | 620 | 490 | |
| 5 | 850 | 750 | 690 | — | — | — | 610 | 570 | 490 | |
| 6 | 520 | 440 | — | — | — | — | 540 | 430 | 330 | |
| M | 1 | 670 | 610 | 510 | — | — | — | 670 | 590 | 540 |
| 2 | 610 | 520 | 460 | — | — | — | 610 | 520 | 430 | |
| 3 | 480 | 430 | 380 | — | — | — | 460 | 390 | 310 | |
| K | 1 | 970 | 870 | 790 | 1380 | 1260 | 1120 | 820 | 720 | 610 |
| 2 | 770 | 690 | 620 | 1100 | 970 | 900 | 660 | 590 | 490 | |
| 3 | 640 | 570 | 520 | 920 | 820 | 750 | 590 | 490 | 390 | |
| N | 1 | — | — | — | — | — | — | 1800 | 1540 | 1310 |
| 2 | — | — | — | — | — | — | 1800 | 1540 | 1310 | |
| 3 | — | — | — | — | — | — | 1310 | 1150 | 980 | |
| S | 1 | — | — | — | — | — | — | 130 | 110 | 80 |
| 2 | — | — | — | — | — | — | 130 | 110 | 80 | |
| 3 | — | — | — | — | — | — | 160 | 130 | 80 | |
| 4 | — | — | — | — | — | — | 230 | 160 | 110 | |
| H | 1 | — | — | — | — | — | — | 360 | 260 | 230 |
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
