Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

H/P Solid Carbide • Aluminum

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (213)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (213)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (213)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (213)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (213)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (213)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (213)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (213)
  • M Stainless Steel (213)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (213)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (213)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (213)
  • K Cast Iron (213)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (213)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (213)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (213)
  • N Non-Ferrous Materials (960)
    • N1
      Wrought Aluminum
      (960)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (960)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (891)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (891)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (891)
    • N6
      Carbon, Graphite Composites, CFRP
      (213)
    • N7
      MMC's
      (213)
  • S High-Temp Alloys (213)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (213)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (213)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (213)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (213)
  • H Hardened Materials (213)
    • H1
      Hardened Materials 44-48 HRC
      (213)
    • H2
      Hardened Materials 48-55 HRC
      (213)
    • H3
      Hardened Materials 56-60 HRC
      (213)
    • H4
      Hardened Materials >60 HRC
      (213)
Select First Choice
  • US (35)
Applications
  • Chamfer Milling Chamfer Milling (739)
  • Countersinking Countersinking (739)
  • Drilling Drilling (209)
  • Face Milling Face Milling (739)
  • Flat Bottom Drilling Flat Bottom Drilling (780)
  • Pocket Pocket (1089)
  • Pocket Helical Pocket Helical (1089)
  • Pocket Milling Pocket Milling (1089)
  • Pocket Plunge Milling Pocket Plunge Milling (910)
  • Profile Milling Profile Milling (739)
  • Ramping Ramping (913)
  • Shoulder Ball Nose Shoulder Ball Nose (739)
  • Shoulder Milling Shoulder Milling (1089)
  • Shoulder Roughing Shoulder Roughing (350)
  • Shoulder Square End Shoulder Square End (1095)
  • Slot Ball Nose Slot Ball Nose (739)
  • Slot Milling Slot Milling (954)
  • Slot Side Slot Side (760)
  • Slot Square End Slot Square End (954)
  • Trochoidal Milling Trochoidal Milling (25)
Cutting Diameter
  • 1.0 (4)
  • 1.5 (5)
  • 2.0 (5)
  • 2.5 (4)
  • 3.0 (10)
  • 3.175 (27)
  • 4.0 (13)
  • 4.7625 (11)
  • 4.763 (27)
  • 5.0 (15)
  • 6.0 (19)
  • 6.35 (98)
  • 7.9375 (18)
  • 7.938 (50)
  • 8.0 (23)
  • 9.525 (113)
  • 10.0 (23)
  • 11.113 (6)
  • 12.0 (28)
  • 12.7 (176)
  • 14.0 (8)
  • 15.875 (114)
  • 16.0 (29)
  • 18.0 (7)
  • 19.05 (171)
  • 20.0 (30)
  • 25.0 (3)
  • 25.4 (140)
  • 31.75 (5)
to
Cutting Diameter
  • 0.039 (3)
  • 0.0394 (1)
  • 0.059 (3)
  • 0.0591 (2)
  • 0.0787 (3)
  • 0.079 (2)
  • 0.098 (1)
  • 0.0984 (3)
  • 0.118 (4)
  • 0.1181 (6)
  • 0.125 (27)
  • 0.157 (5)
  • 0.1575 (8)
  • 0.1875 (21)
  • 0.188 (17)
  • 0.1969 (9)
  • 0.197 (6)
  • 0.236 (6)
  • 0.2362 (13)
  • 0.25 (98)
  • 0.3125 (68)
  • 0.315 (23)
  • 0.375 (113)
  • 0.3937 (15)
  • 0.394 (8)
  • 0.4375 (6)
  • 0.472 (9)
  • 0.4724 (19)
  • 0.5 (176)
  • 0.551 (6)
  • 0.5512 (2)
  • 0.625 (114)
  • 0.6299 (19)
  • 0.63 (10)
  • 0.7087 (2)
  • 0.709 (5)
  • 0.75 (171)
  • 0.787 (9)
  • 0.7874 (21)
  • 0.984 (3)
  • 1.0 (140)
  • 1.25 (5)
to
Cutting Length
  • 0.157 (3)
  • 0.1575 (1)
  • 0.1875 (6)
  • 0.236 (2)
  • 0.2362 (3)
  • 0.25 (35)
  • 0.3125 (29)
  • 0.315 (8)
  • 0.354 (1)
  • 0.3543 (6)
  • 0.375 (50)
  • 0.3937 (3)
  • 0.394 (1)
  • 0.4375 (28)
  • 0.472 (10)
  • 0.4724 (15)
  • 0.5 (63)
  • 0.5118 (5)
  • 0.512 (1)
  • 0.551 (6)
  • 0.5512 (5)
  • 0.5625 (27)
  • 0.5906 (4)
  • 0.591 (1)
  • 0.625 (79)
  • 0.6299 (4)
  • 0.63 (7)
  • 0.7087 (10)
  • 0.75 (93)
  • 0.787 (5)
  • 0.7874 (4)
  • 0.8125 (10)
  • 0.866 (7)
  • 0.8661 (9)
  • 0.875 (34)
  • 0.9449 (6)
  • 0.945 (1)
  • 0.984 (5)
  • 0.9843 (11)
  • 1.0 (106)
  • 1.0236 (1)
  • 1.024 (5)
  • 1.125 (47)
  • 1.1811 (7)
  • 1.25 (90)
  • 1.2598 (14)
  • 1.26 (14)
  • 1.4173 (4)
  • 1.496 (12)
  • 1.4961 (5)
  • 1.5 (80)
  • 1.5748 (9)
  • 1.625 (19)
  • 1.75 (11)
  • 1.772 (3)
  • 1.8898 (3)
  • 2.0 (27)
  • 2.25 (34)
  • 2.3622 (5)
  • 2.5 (34)
  • 3.0 (33)
  • 3.25 (7)
  • 4.0 (14)
to
Cutting Length
  • 4.0 (4)
  • 4.7625 (4)
  • 4.763 (2)
  • 6.0 (5)
  • 6.35 (35)
  • 7.9375 (18)
  • 7.938 (11)
  • 8.0 (8)
  • 9.0 (7)
  • 9.525 (50)
  • 10.0 (4)
  • 11.113 (28)
  • 12.0 (25)
  • 12.7 (63)
  • 13.0 (6)
  • 14.0 (11)
  • 14.288 (27)
  • 15.0 (5)
  • 15.875 (79)
  • 16.0 (11)
  • 18.0 (10)
  • 19.05 (93)
  • 20.0 (9)
  • 20.638 (10)
  • 22.0 (16)
  • 22.225 (34)
  • 24.0 (7)
  • 25.0 (16)
  • 25.4 (106)
  • 26.0 (6)
  • 28.575 (47)
  • 30.0 (7)
  • 31.75 (90)
  • 32.0 (28)
  • 36.0 (4)
  • 38.0 (17)
  • 38.1 (80)
  • 40.0 (9)
  • 41.275 (19)
  • 44.45 (11)
  • 45.0 (3)
  • 48.0 (3)
  • 50.8 (27)
  • 57.15 (34)
  • 60.0 (5)
  • 63.5 (34)
  • 76.2 (33)
  • 82.55 (7)
  • 101.6 (14)
to
Reach
  • 4.0 (1)
  • 6.0 (2)
  • 6.35 (6)
  • 7.938 (4)
  • 8.0 (2)
  • 9.0 (2)
  • 9.525 (11)
  • 11.113 (6)
  • 12.0 (14)
  • 12.7 (28)
  • 13.0 (1)
  • 14.0 (8)
  • 14.2875 (4)
  • 14.288 (2)
  • 15.0 (3)
  • 15.875 (24)
  • 16.0 (9)
  • 18.0 (9)
  • 19.05 (48)
  • 20.0 (6)
  • 20.638 (10)
  • 22.0 (8)
  • 22.225 (27)
  • 24.0 (12)
  • 25.0 (6)
  • 25.4 (37)
  • 26.0 (5)
  • 28.575 (21)
  • 30.0 (10)
  • 31.75 (73)
  • 32.0 (17)
  • 36.0 (12)
  • 38.0 (13)
  • 38.1 (126)
  • 40.0 (3)
  • 41.275 (10)
  • 44.45 (8)
  • 45.0 (3)
  • 48.0 (18)
  • 50.8 (40)
  • 57.15 (101)
  • 60.0 (13)
  • 63.5 (37)
  • 64.0 (3)
  • 69.85 (8)
  • 76.2 (47)
  • 80.0 (5)
  • 82.55 (57)
  • 88.9 (6)
  • 95.25 (6)
  • 101.6 (16)
  • 107.95 (27)
to
Reach
  • 0.157 (1)
  • 0.236 (1)
  • 0.2362 (1)
  • 0.25 (6)
  • 0.3125 (4)
  • 0.315 (2)
  • 0.354 (1)
  • 0.3543 (1)
  • 0.375 (11)
  • 0.4375 (6)
  • 0.472 (7)
  • 0.4724 (7)
  • 0.5 (28)
  • 0.512 (1)
  • 0.551 (5)
  • 0.5512 (3)
  • 0.5625 (6)
  • 0.5906 (3)
  • 0.625 (24)
  • 0.6299 (2)
  • 0.63 (7)
  • 0.7087 (8)
  • 0.709 (1)
  • 0.75 (48)
  • 0.787 (3)
  • 0.7874 (3)
  • 0.8125 (10)
  • 0.866 (6)
  • 0.8661 (2)
  • 0.875 (27)
  • 0.9449 (11)
  • 0.945 (1)
  • 0.984 (4)
  • 0.9843 (2)
  • 1.0 (37)
  • 1.024 (5)
  • 1.125 (21)
  • 1.181 (1)
  • 1.1811 (9)
  • 1.25 (73)
  • 1.2598 (5)
  • 1.26 (12)
  • 1.417 (1)
  • 1.4173 (11)
  • 1.496 (9)
  • 1.4961 (4)
  • 1.5 (126)
  • 1.5748 (3)
  • 1.625 (10)
  • 1.75 (8)
  • 1.772 (3)
  • 1.8898 (13)
  • 1.89 (5)
  • 2.0 (40)
  • 2.25 (101)
  • 2.362 (1)
  • 2.3622 (12)
  • 2.5 (37)
  • 2.5197 (3)
  • 2.75 (8)
  • 3.0 (47)
  • 3.1496 (5)
  • 3.25 (57)
  • 3.5 (6)
  • 3.75 (6)
  • 4.0 (16)
  • 4.25 (27)
to
Tool Cutting Edge Angle
  • 90.0 (1095)
to
Connection Style
  • Straight-Cylindrical (1142)
  • Weldon (40)
Internal Coolant Capability
cornerConfiguration
Corner Style
  • BALL NOSE (53)
  • CHAMFER (31)
  • RADIUS (518)
  • SQUARE END (495)
Corner Radius
  • 0.0 (579)
  • 0.2 (23)
  • 0.25 (6)
  • 0.381 (46)
  • 0.5 (29)
  • 0.762 (156)
  • 1.0 (22)
  • 1.5 (14)
  • 1.524 (143)
  • 1.588 (4)
  • 2.0 (5)
  • 2.286 (25)
  • 2.381 (4)
  • 2.5 (1)
  • 3.0 (6)
  • 3.048 (38)
  • 3.175 (8)
  • 3.969 (6)
  • 4.0 (4)
  • 4.763 (8)
  • 4.826 (3)
  • 5.0 (1)
  • 5.556 (2)
  • 6.35 (16)
  • 7.938 (12)
  • 9.525 (12)
  • 12.7 (9)
to
Corner Radius
  • 0.0 (579)
  • 0.0079 (23)
  • 0.0098 (2)
  • 0.01 (4)
  • 0.015 (46)
  • 0.0197 (23)
  • 0.02 (6)
  • 0.03 (156)
  • 0.039 (6)
  • 0.0394 (16)
  • 0.059 (2)
  • 0.0591 (12)
  • 0.06 (143)
  • 0.0625 (4)
  • 0.0787 (5)
  • 0.09 (25)
  • 0.0938 (4)
  • 0.0984 (1)
  • 0.1181 (6)
  • 0.12 (38)
  • 0.125 (8)
  • 0.1563 (6)
  • 0.1575 (4)
  • 0.1875 (8)
  • 0.19 (3)
  • 0.1969 (1)
  • 0.2188 (2)
  • 0.25 (16)
  • 0.3125 (12)
  • 0.375 (12)
  • 0.5 (9)
to
Corner Chamfer
  • 0.0 (1125)
  • 0.0024 (3)
  • 0.01 (7)
  • 0.012 (2)
  • 0.014 (9)
  • 0.02 (7)
  • 0.024 (6)
  • 0.0394 (7)
  • 0.04 (16)
to
Corner Chamfer
  • 0.0 (1125)
  • 0.06 (3)
  • 0.25 (7)
  • 0.3 (2)
  • 0.35 (9)
  • 0.5 (7)
  • 0.6 (6)
  • 1.0 (7)
  • 1.016 (16)
to
application
Grade Of Cutting Tool
  • TIALN-RT (4)
  • TICN-CT (188)
  • TICN-CW (14)
  • UNCOATED (926)
  • UNCOATEDWW (3)
Hand Of Tool
  • R (1182)
Rough Finish
  • F (1119)
  • R (63)
Maximum Ramp Angle
  • 30.0 (6)
  • 45.0 (350)
to
backEnd
Connection Type
  • CYLINDRICAL (1182)
Back-End Diameter
  • 0.1181 (27)
  • 0.125 (25)
  • 0.1575 (12)
  • 0.1875 (36)
  • 0.1969 (11)
  • 0.2362 (25)
  • 0.25 (102)
  • 0.3125 (68)
  • 0.315 (23)
  • 0.375 (113)
  • 0.3937 (23)
  • 0.4375 (6)
  • 0.4724 (28)
  • 0.5 (176)
  • 0.5512 (8)
  • 0.625 (114)
  • 0.6299 (29)
  • 0.7087 (7)
  • 0.75 (171)
  • 0.7874 (30)
  • 0.9843 (3)
  • 1.0 (140)
  • 1.25 (5)
to
Back-End Diameter
  • 3.0 (27)
  • 3.175 (25)
  • 4.0 (12)
  • 4.7625 (11)
  • 4.763 (25)
  • 5.0 (11)
  • 6.0 (25)
  • 6.35 (102)
  • 7.9375 (18)
  • 7.938 (50)
  • 8.0 (23)
  • 9.525 (113)
  • 10.0 (23)
  • 11.113 (6)
  • 12.0 (28)
  • 12.7 (176)
  • 14.0 (8)
  • 15.875 (114)
  • 16.0 (29)
  • 18.0 (7)
  • 19.05 (171)
  • 20.0 (30)
  • 25.0 (3)
  • 25.4 (140)
  • 31.75 (5)
to
other
Grade
  • TIALN-RT (4)
  • TICN-CT (188)
  • TICN-CW (14)
  • UNCOATED (926)
  • UNCOATEDWW (3)
Platform
  • AluSurf (208)
  • Aluflash (350)
  • ArCut (210)
  • List 4909 (6)
  • Series 4102 (15)
  • Series 4103 (20)
  • Series 49G9 (10)
  • Series 49N9 (12)
  • Series 4A01 (32)
  • Series 4A0R (20)
  • Series 4AN1 (11)
  • Series 4AN2 (32)
  • Series 4AN3 (13)
  • Series 4AP2 (11)
  • Series 4AP3 (4)
Tool Unit
  • I (956)
  • M (226)
Over All Length [L]
  • 38.0 (27)
  • 38.1 (2)
  • 50.0 (30)
  • 50.8 (66)
  • 57.0 (3)
  • 57.15 (11)
  • 63.0 (26)
  • 63.5 (101)
  • 72.0 (5)
  • 76.0 (40)
  • 76.2 (120)
  • 82.55 (22)
  • 83.0 (13)
  • 88.9 (51)
  • 89.0 (23)
  • 92.0 (6)
  • 100.0 (13)
  • 101.6 (193)
  • 104.0 (14)
  • 107.95 (4)
  • 110.0 (7)
  • 114.3 (16)
  • 115.0 (7)
  • 121.0 (3)
  • 125.0 (4)
  • 127.0 (145)
  • 133.35 (14)
  • 139.7 (47)
  • 150.0 (5)
  • 152.4 (102)
  • 158.75 (6)
  • 165.1 (13)
  • 177.8 (33)
  • 203.2 (10)
to
Over All Length [L]
  • 1.496 (12)
  • 1.4961 (15)
  • 1.5 (2)
  • 1.9685 (15)
  • 1.969 (15)
  • 2.0 (66)
  • 2.244 (2)
  • 2.2441 (1)
  • 2.25 (11)
  • 2.48 (8)
  • 2.4803 (18)
  • 2.5 (101)
  • 2.8346 (1)
  • 2.835 (4)
  • 2.992 (9)
  • 2.9921 (31)
  • 3.0 (120)
  • 3.25 (22)
  • 3.2677 (3)
  • 3.268 (10)
  • 3.5 (51)
  • 3.5039 (17)
  • 3.504 (6)
  • 3.622 (6)
  • 3.937 (13)
  • 4.0 (193)
  • 4.094 (9)
  • 4.0945 (5)
  • 4.25 (4)
  • 4.3307 (7)
  • 4.5 (16)
  • 4.5276 (7)
  • 4.764 (3)
  • 4.9213 (4)
  • 5.0 (145)
  • 5.25 (14)
  • 5.5 (47)
  • 5.9055 (5)
  • 6.0 (102)
  • 6.25 (6)
  • 6.5 (13)
  • 7.0 (33)
  • 8.0 (10)
to
Head Length [L2]
  • 4.77 (1)
  • 4.8 (1)
  • 6.35 (2)
  • 7.0 (1)
  • 7.94 (2)
  • 9.0 (1)
  • 9.5 (3)
  • 9.525 (1)
  • 9.53 (1)
  • 10.0 (1)
  • 11.11 (1)
  • 11.15 (1)
  • 12.0 (6)
  • 12.7 (9)
  • 14.0 (3)
  • 14.29 (1)
  • 14.3 (1)
  • 15.0 (3)
  • 15.875 (8)
  • 16.0 (1)
  • 18.0 (4)
  • 19.05 (16)
  • 20.0 (2)