Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

H/P Solid Carbide • Finishing

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (111)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (111)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (111)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (110)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (96)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (96)
  • M Stainless Steel (111)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (111)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (110)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (96)
  • K Cast Iron (111)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (111)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (110)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (96)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
  • S High-Temp Alloys (96)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (96)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (96)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (96)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (96)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC
      (97)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • CN (9)
  • DE (18)
  • GB (11)
  • SG (6)
  • US (32)
Applications
Applications
  • Pocket Pocket (57)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (68)
  • Pocket Plunge Milling Pocket Plunge Milling (11)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (45)
  • Shoulder Ball Nose Shoulder Ball Nose (14)
  • Shoulder Milling Shoulder Milling (89)
  • Shoulder Roughing Shoulder Roughing (24)
  • Shoulder Square End Shoulder Square End (99)
  • Slot Ball Nose Slot Ball Nose (14)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (46)
Cutting Diameter
Cutting Diameter
  • 0.039 in (2)
  • 0.06 in (2)
  • 0.079 in (3)
  • 0.098 in (3)
  • 0.119 in (7)
  • 0.125 in (2)
  • 0.138 in (2)
  • 0.157 in (8)
  • 0.177 in (1)
  • 0.188 in (2)
  • 0.197 in (5)
  • 0.237 in (10)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 2.0 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (7)
  • 3.176 mm (2)
  • 3.5 mm (2)
  • 4.0 mm (8)
  • 4.5 mm (1)
  • 4.775 mm (2)
  • 5.0 mm (5)
  • 6.0 mm (10)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (8)
  • 4.0 mm (4)
  • 5.0 mm (4)
  • 6.0 mm (1)
  • 7.0 mm (5)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (4)
  • 11.125 mm (1)
  • 12.0 mm (6)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 20.651 mm (1)
  • 22.0 mm (9)
  • 22.225 mm (3)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 45.0 mm (1)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 76.2 mm (2)
  • 101.601 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (8)
  • 0.157 in (4)
  • 0.197 in (4)
  • 0.237 in (1)
  • 0.276 in (5)
  • 0.315 in (3)
  • 0.354 in (3)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (4)
  • 0.438 in (1)
  • 0.473 in (6)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.814 in (1)
  • 0.866 in (9)
  • 0.875 in (3)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.772 in (1)
  • 2.0 in (2)
  • 2.25 in (5)
  • 3.0 in (2)
  • 4.0 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.119 in (7)
  • 0.157 in (3)
  • 0.197 in (3)
  • 0.237 in (1)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (3)
  • 0.438 in (1)
  • 0.473 in (5)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (1)
  • 0.814 in (1)
  • 0.866 in (7)
  • 0.875 in (3)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (5)
  • 1.379 in (2)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.772 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.25 in (5)
  • 2.362 in (2)
  • 3.0 in (2)
  • 4.0 in (1)
Reach Min to Reach Max
Reach
Reach
  • 3.0 mm (7)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (1)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (2)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (3)
  • 11.125 mm (1)
  • 12.0 mm (5)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (1)
  • 20.651 mm (1)
  • 22.0 mm (7)
  • 22.225 mm (3)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (2)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 60.0 mm (2)
  • 76.2 mm (2)
  • 101.601 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (135)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (82)
  • Weldon (54)
Number of Flutes
Number of Flutes
  • 2 (14)
  • 3 (58)
  • 4 (2)
  • 5 (16)
  • 6 (42)
  • 8 (4)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (14)
  • CHAMFER (8)
  • RADIUS (12)
  • SQUARE END (102)
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.01 in (4)
  • 0.019 in (6)
  • 0.02 in (1)
  • 0.03 in (3)
  • 0.039 in (1)
  • 0.06 in (1)
  • 0.079 in (1)
  • 0.098 in (1)
  • 0.119 in (1)
  • 0.157 in (1)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.25 mm (4)
  • 0.45 mm (6)
  • 0.5 mm (1)
  • 0.75 mm (3)
  • 1.0 mm (1)
  • 1.5 mm (1)
  • 2.0 mm (1)
  • 2.5 mm (1)
  • 3.0 mm (1)
  • 4.0 mm (1)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (128)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.301 mm (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (128)
  • 0.004 in (5)
  • 0.008 in (1)
  • 0.012 in (2)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (6)
  • TICN-CT (5)
  • UNCOATED (4)
  • WP15PE (85)
Rough Finish
Rough Finish
  • F (109)
  • FR (27)
frontEnd
Neck Diameter
Neck Diameter
  • 0.222 in (1)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (1)
  • 0.444 in (1)
  • 0.453 in (1)
  • 0.593 in (1)
  • 0.61 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.65 mm (1)
  • 7.525 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 11.275 mm (1)
  • 11.5 mm (1)
  • 15.05 mm (1)
  • 15.5 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 3.176 mm (2)
  • 4.0 mm (8)
  • 4.775 mm (2)
  • 6.0 mm (35)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (2)
  • 0.157 in (8)
  • 0.188 in (2)
  • 0.237 in (35)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Fresas de mango de metal duro integral • Herramientas de acabado

Serie 4503 JJ • Sistema métrico
(16 Products)
  • 3857138571
  • Ángulo de la hélice: 45°Ángulo de la hélice: 45°
  • Estilo de esquina: Placa cuadradaEstilo de esquina: Placa cuadrada
  • 3852638526
  • Ranurado: Placa cuadradaRanurado: Placa cuadrada
  • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
  • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
  • Mango — Liso cilíndricoMango — Liso cilíndrico
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
5559171 450301501T 450301501T WP15PE   Straight-Cylindrical 1.5000 .0591 4.0 .1575 3.0000 .1181 50.0000 1.968 3
    List price:
    $24,91 /each.
    Your price::
    5559172 450302001T 450302001T WP15PE   Straight-Cylindrical 2.0000 .0787 4.0 .1575 3.0000 .1181 50.0000 1.968 3
      List price:
      $24,91 /each.
      Your price::
      5559175 450303002T 450303002T WP15PE   Straight-Cylindrical 3.0000 .1181 6.0 .2362 8.0000 .3150 50.0000 1.968 3
        List price:
        $35,57 /each.
        Your price::
        5559177 450304002T 450304002T WP15PE   Straight-Cylindrical 4.0000 .1575 6.0 .2362 12.0000 .4724 50.0000 1.968 3
          List price:
          $35,57 /each.
          Your price::
          5559178 450304502T 450304502T WP15PE   Straight-Cylindrical 4.5000 .1772 6.0 .2362 14.0000 .5512 50.0000 1.968 3
            List price:
            $35,57 /each.
            Your price::
            5559180 450306002T 450306002T WP15PE   Straight-Cylindrical 6.0000 .2362 6.0 .2362 16.0000 .6299 50.0000 1.968 3
              List price:
              $35,57 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              Solid Carbide End Mills • Finishers

              Series 4C03 4C43
              (6 Products)
              • Dimensiones de la herramienta: Configuración del canal: 3 Dimensiones de la herramienta: Configuración del canal: 3
              • 3850338503
              • Estilo de esquina: Radio de esquinaEstilo de esquina: Radio de esquina
              • Ranurado: Placa cuadradaRanurado: Placa cuadrada
              • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
              • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              2842506 TC4C0303001A TC4C0303001A TICN-CT   Straight-Cylindrical 0.2540 .0100 3 3.1750 .1250 3.175 .125 12.7000 .5000 38.1000 1.500
                List price:
                $34,06 /each.
                Your price::
                2842502 TC4C0305000A TC4C0305000A TICN-CT   Straight-Cylindrical 0.2540 .0100 3 4.7630 .1875 4.763 .1875 15.8750 .6250 50.8000 2.000
                  List price:
                  $41,51 /each.
                  Your price::
                  2842358 TC4C4308003A TC4C4308003A TICN-CT   Straight-Cylindrical 0.4570 .0180 3 7.9380 .3125 7.938 .3125 11.1130 .4375 50.8000 2.000
                    List price:
                    $46,36 /each.
                    Your price::
                    2831773 TR4C0313015A TR4C0313015A WP15PE   Straight-Cylindrical 0.7620 .0300 3 12.7000 .5000 12.7 .5 31.7500 1.250 76.2000 3.000
                      List price:
                      $112,61 /each.
                      Your price::
                      2831761 TR4C0319007A TR4C0319007A TIALN   Straight-Cylindrical 0.7620 .0300 3 19.0500 .7500 19.05 .75 38.1000 1.500 101.6000 4.000
                        List price:
                        $292,04 /each.
                        Your price::
                        2831637 TR4C4307002A TR4C4307002A TIALN   Straight-Cylindrical 0.4570 .0180 3 6.3500 .2500 6.35 .25 12.7000 .5000 50.8000 2.000
                          List price:
                          $41,65 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance

                          ORIGINAL PRODUCT

                          Solid Carbide End Mills • Finishers

                          Series 4C05 4C15 • Inch
                          (16 Products)
                          • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
                          • Ángulo de la hélice: 45°Ángulo de la hélice: 45°
                          • Estilo de esquina: Placa cuadradaEstilo de esquina: Placa cuadrada
                          • Rectificado en rampa: Material en brutoRectificado en rampa: Material en bruto
                          • Fresado lateral/Fresado en escuadra: Placa cuadradaFresado lateral/Fresado en escuadra: Placa cuadrada
                          • Mango — Liso cilíndricoMango — Liso cilíndrico
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
                          5577188 4C0505000ST 4C0505000ST WP15PE   Straight-Cylindrical 5 4.7630 .1875 4.763 .1875 15.8750 .6250 50.8000 2.000
                            List price:
                            $39,47 /each.
                            Your price::
                            5577189 4C0507002ST 4C0507002ST WP15PE   Straight-Cylindrical 5 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
                              List price:
                              $43,05 /each.
                              Your price::
                              5577247 4C1507002ST 4C1507002ST WP15PE   Straight-Cylindrical 5 6.3500 .2500 6.35 .25 31.7500 1.250 101.6000 4.000
                                List price:
                                $54,73 /each.
                                Your price::
                                2831592 TR4C4507002 TR4C4507002 WP15PE   Straight-Cylindrical 5 6.3500 .2500 6.35 .25 9.5250 .3750 50.8000 2.000
                                  List price:
                                  $41,65 /each.
                                  Your price::
                                  2831580 TR4C4510004 TR4C4510004 WP15PE   Straight-Cylindrical 5 9.5250 .3750 9.525 .375 12.7000 .5000 50.8000 2.000
                                    List price:
                                    $57,74 /each.
                                    Your price::
                                    2268565 TR4C4513005 TR4C4513005 TIALN   Straight-Cylindrical 5 12.7000 .5000 12.7 .5 15.8750 .6250 63.5000 2.500