successfully added to cart
View Cart

Unidades de corte KM80TS™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (77)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (77)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (77)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (77)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (77)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (77)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (77)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (77)
  • M Stainless Steel (72)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (72)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (72)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (72)
  • K Cast Iron (79)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (79)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (79)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (79)
  • N Non-Ferrous Materials (56)
    • N1
      Wrought Aluminum
      (56)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (56)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (26)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (56)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (56)
    • N6
      Carbon, Graphite Composites, CFRP
      (55)
    • N7
      MMC's
      (52)
  • S High-Temp Alloys (74)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (74)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (74)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (74)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (69)
  • H Hardened Materials (46)
    • H1
      Hardened Materials 44-48 HRC
      (46)
    • H2
      Hardened Materials 48-55 HRC
      (44)
    • H3
      Hardened Materials 56-60 HRC
      (44)
    • H4
      Hardened Materials >60 HRC
      (43)
Applications
  • Back Boring Back Boring (15)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (13)
  • Blind Hole Finishing Blind Hole Finishing (13)
  • Chamfer Turning Chamfer Turning (37)
  • Cut-Off Cut-Off (13)
  • Deep Grooving Deep Grooving (13)
  • Face Grooving Face Grooving (13)
  • Facing Facing (71)
  • Grooving Grooving (13)
  • ID Facing ID Facing (5)
  • ID Grooving ID Grooving (13)
  • ID Thread Turning ID Thread Turning (13)
  • Multiple Direction Cutting Multiple Direction Cutting (79)
  • OD Thread Turning OD Thread Turning (13)
  • Plunge Turning Plunge Turning (37)
  • Profiling Profiling (57)
  • TRN Boring TRN Boring (47)
  • Threading Threading (13)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (13)
  • Through Hole Finishing Through Hole Finishing (13)
  • Turning Turning (79)
Type of Thread
  • 60 (7)
  • ACME (9)
  • API (7)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (7)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (7)
  • UNJ (3)
Cutting Condition
  • Heavily Interrupted Cut (74)
  • Interrupted (38)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (74)
  • Varying Depth of Cut (74)
Tool Cutting Edge Angle
  • 45.0 (6)
  • 62.5 (2)
  • 75.0 (18)
  • 90.0 (19)
  • 93.0 (12)
  • 95.0 (18)
  • 107.5 (4)
to
Connection Style
  • KM (45)
Cutting Edges Per Insert
  • 1.0 (43)
  • 2.0 (51)
  • 3.0 (2)
  • 4.0 (58)
  • 6.0 (2)
  • 8.0 (44)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.051 (2)
  • 0.057 (1)
  • 0.066 (3)
  • 0.076 (7)
  • 0.08 (3)
  • 0.094 (3)
  • 0.097 (1)
  • 0.1 (18)
  • 0.102 (19)
  • 0.116 (2)
  • 0.117 (1)
  • 0.127 (3)
  • 0.131 (3)
  • 0.132 (3)
  • 0.133 (3)
  • 0.15 (3)
  • 0.155 (3)
  • 0.157 (3)
  • 0.16 (4)
  • 0.165 (7)
  • 0.173 (3)
  • 0.178 (3)
  • 0.19 (7)
  • 0.191 (7)
  • 0.198 (3)
  • 0.2 (18)
  • 0.202 (3)
  • 0.203 (13)
  • 0.224 (3)
  • 0.235 (3)
  • 0.244 (2)
  • 0.25 (3)
  • 0.251 (3)
  • 0.254 (7)
  • 0.269 (3)
  • 0.282 (3)
  • 0.284 (3)
  • 0.3 (3)
  • 0.315 (5)
  • 0.318 (11)
  • 0.33 (3)
  • 0.34 (10)
  • 0.343 (4)
  • 0.356 (3)
  • 0.397 (24)
  • 0.4 (28)
  • 0.404 (3)
  • 0.406 (19)
  • 0.43 (3)
  • 0.445 (7)
  • 0.472 (2)
  • 0.49 (3)
  • 0.508 (3)
  • 0.565 (2)
  • 0.57 (1)
  • 0.572 (11)
  • 0.575 (6)
  • 0.6 (2)
  • 0.787 (3)
  • 0.792 (9)
  • 0.794 (24)
  • 0.8 (44)
  • 0.826 (6)
  • 0.902 (7)
  • 1.0 (3)
  • 1.188 (4)
  • 1.19 (2)
  • 1.191 (36)
  • 1.194 (3)
  • 1.195 (1)
  • 1.2 (44)
  • 1.25 (3)
  • 1.5 (3)
  • 1.585 (3)
  • 1.587 (2)
  • 1.588 (40)
  • 1.59 (2)
  • 1.6 (56)
  • 1.75 (3)
  • 1.98 (1)
  • 1.981 (3)
  • 2.0 (7)
  • 2.25 (7)
  • 2.38 (4)
  • 2.381 (20)
  • 2.388 (7)
  • 2.39 (2)
  • 2.4 (36)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (22)
  • 4.0 (8)
  • 10.0 (1)
  • 12.5 (3)
  • 16.0 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (1)
  • 0.0026 (3)
  • 0.003 (7)
  • 0.0031 (3)
  • 0.0037 (3)
  • 0.0038 (1)
  • 0.004 (25)
  • 0.0046 (3)
  • 0.005 (3)
  • 0.0052 (3)
  • 0.0053 (3)
  • 0.0059 (3)
  • 0.006 (3)
  • 0.0062 (3)
  • 0.0065 (7)
  • 0.0068 (3)
  • 0.007 (3)
  • 0.0075 (7)
  • 0.0078 (3)
  • 0.0079 (2)
  • 0.008 (18)
  • 0.0083 (2)
  • 0.0088 (3)
  • 0.0093 (3)
  • 0.0096 (2)
  • 0.0099 (3)
  • 0.01 (7)
  • 0.0106 (3)
  • 0.0111 (3)
  • 0.0112 (3)
  • 0.0118 (3)
  • 0.0124 (3)
  • 0.0125 (11)
  • 0.013 (10)
  • 0.0135 (7)
  • 0.014 (3)
  • 0.0156 (28)
  • 0.0159 (3)
  • 0.016 (27)
  • 0.017 (3)
  • 0.0175 (7)
  • 0.0186 (2)
  • 0.0193 (3)
  • 0.02 (3)
  • 0.0225 (11)
  • 0.031 (33)
  • 0.0312 (24)
  • 0.0313 (44)
  • 0.0315 (2)
  • 0.0325 (6)
  • 0.0355 (7)
  • 0.0394 (3)
  • 0.0468 (4)
  • 0.0469 (44)
  • 0.047 (41)
  • 0.0472 (2)
  • 0.0492 (3)
  • 0.0591 (3)
  • 0.0625 (63)
  • 0.063 (31)
  • 0.0689 (3)
  • 0.078 (3)
  • 0.0787 (7)
  • 0.0886 (7)
  • 0.0928 (6)
  • 0.0938 (43)
  • 0.094 (29)
  • 0.0984 (4)
  • 0.106 (1)
  • 0.125 (14)
  • 0.126 (12)
  • 0.1563 (4)
  • 0.1575 (8)
  • 0.312 (7)
  • 0.3935 (1)
  • 0.3937 (1)
  • 0.4922 (3)
  • 0.6299 (2)
  • 0.63 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (32)
  • 241 (2)
  • CG4 (1)
  • CL4 (26)
  • CM2 (32)
  • CM3 (26)
  • CM4 (6)
  • CM5 (1)
  • CPX (37)
  • CW2 (9)
  • CW2015 (34)
  • CW3020 (2)
  • CW5025 (36)
  • GX (19)
  • HK1500 (19)
  • HT2 (9)
  • HTX (2)
  • K060 (11)
  • K090 (42)
  • K1 (25)
  • K10M (42)
  • K10P (34)
  • K10U (22)
  • K15U (22)
  • K20K (42)
  • K21 (18)
  • K25M (26)
  • K25P (38)
  • K2885 (3)
  • K313 (50)
  • K35P (28)
  • K420 (56)
  • K45 (13)
  • K4H (3)
  • K68 (54)
  • KB1340 (4)
  • KB1345 (16)
  • KB1610 (15)
  • KB1625 (13)
  • KB1630 (20)
  • KB5610 (15)
  • KB5625 (16)
  • KB5630 (13)
  • KB9610 (22)
  • KB9640 (6)
  • KBH10 (22)
  • KBH10B (20)
  • KBH20 (22)
  • KBH20B (20)
  • KBK35 (4)
  • KBK45 (2)
  • KC210 (32)
  • KC250 (32)
  • KC5010 (65)
  • KC5025 (55)
  • KC5410 (49)
  • KC5510 (42)
  • KC5525 (18)
  • KC710 (9)
  • KC720 (34)
  • KC722 (9)
  • KC730 (45)
  • KC7310 (42)
  • KC732 (22)
  • KC8050 (59)
  • KC810 (55)
  • KC850 (72)
  • KC9010 (47)
  • KC9025 (58)
  • KC910 (45)
  • KC9105 (34)
  • KC9110 (68)
  • KC9120 (58)
  • KC9125 (61)
  • KC9140 (58)
  • KC9145 (51)
  • KC9210 (7)
  • KC9215 (42)
  • KC9225 (42)
  • KC9240 (61)
  • KC9240NEW (55)
  • KC9245 (42)
  • KC9315 (43)
  • KC9320 (49)
  • KC9325 (42)
  • KC935 (55)
  • KC950 (56)
  • KC990 (49)
  • KCD25 (7)
  • KCK05 (42)
  • KCK05B (42)
  • KCK15 (42)
  • KCK15B (43)
  • KCK20 (50)
  • KCK20B (56)
  • KCM15 (42)
  • KCM15B (34)
  • KCM25 (53)
  • KCM25B (52)
  • KCM35 (42)
  • KCM35B (31)
  • KCP05 (26)
  • KCP05B (29)
  • KCP10 (61)
  • KCP10B (60)
  • KCP25 (61)
  • KCP25B (69)
  • KCP30 (59)
  • KCP30B (54)
  • KCP40 (54)
  • KCP40B (54)
  • KCPK05 (43)
  • KCS10 (3)
  • KCS10B (42)
  • KCU10 (65)
  • KCU25 (54)
  • KD050 (15)
  • KD081 (16)
  • KD100 (18)
  • KD120 (20)
  • KD1400 (15)
  • KD1405 (13)
  • KD1425 (18)
  • KM1 (11)
  • KMF (2)
  • KT1120 (6)
  • KT125 (20)
  • KT150 (13)
  • KT175 (23)
  • KT315 (29)
  • KT325 (9)
  • KT5020 (4)
  • KTP10 (7)
  • KU10T (29)
  • KU25T (7)
  • KU30T (49)
  • KY1310 (17)
  • KY1320 (36)
  • KY1525 (2)
  • KY1540 (19)
  • KY1615 (35)
  • KY2000 (23)
  • KY2100 (11)
  • KY3000 (49)
  • KY3400 (33)
  • KY3500 (44)
  • KY4000 (10)
  • KY4300 (23)
  • KY4400 (36)
  • KYHK15B (36)
  • KYK10 (13)
  • KYK25 (25)
  • KYK35 (44)
  • KYS25 (19)
  • KYS30 (21)
  • MC2 (1)
  • NL200 (9)
  • NL250 (42)
  • NL300 (44)
  • NL400 (23)
  • NL920 (25)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (9)
  • SP0819 (31)
  • SP3019 (24)
  • SP4019 (23)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (29)
  • SPN4W2 (8)
  • THM (21)
  • THM-X (12)
  • THMF-X (2)
  • TN10P (39)
  • TN10U (22)
  • TN15M (42)
  • TN15U (22)
  • TN2000 (30)
  • TN20K (42)
  • TN20P (42)
  • TN30M (42)
  • TN30P (44)
  • TN4000 (30)
  • TN5015 (31)
  • TN5020 (31)
  • TN5105 (18)
  • TN5120 (38)
  • TN6010 (27)
  • TN6025 (22)
  • TN7005 (18)
  • TN7010 (41)
  • TN7015 (54)
  • TN7025 (54)
  • TN7035 (34)
  • TN7105 (11)
  • TN7110 (30)
  • TN7115 (54)
  • TN7125 (47)
  • TN7135 (34)
  • TN8025 (51)
  • TTI15 (9)
  • TTM09 (8)
  • TTR (5)
  • TTR-X (8)
  • TTS (25)
  • TTX (9)
  • W00342 (8)
  • WBH10C (22)
  • WBH10P (13)
  • WBH10U (15)
  • WBH20P (22)
  • WBH25P (13)
  • WBH25U (16)
  • WBH30P (13)
  • WBK40U (4)
  • WBK45U (16)
  • WDN00U (9)
  • WDN25U (15)
  • WK05CT (42)
  • WK15CT (11)
  • WK20CT (42)
  • WM15CT (42)
  • WM25CT (52)
  • WM35CT (42)
  • WP05CT (4)
  • WP15CT (58)
  • WP25CT (58)
  • WP35CT (58)
  • WS10PT (42)
  • WS25PT (42)
  • WU10HT (36)
  • WU10PT (4)
  • WU25PT (1)
  • X00511 (2)
Hand Of Tool
  • L (18)
  • N (8)
  • R (19)
Wiper Insert
  • N (79)
  • Y (20)
Minimum Axial Groove Diameter
  • 0.0 (5)
  • 1.626 (1)
  • 1.874 (1)
  • 2.252 (2)
  • 3.5 (1)
  • 3.937 (8)
  • 4.173 (34)
  • 4.1732 (2)
  • 5.5 (1)
  • 5.9055 (1)
  • 5.906 (1)
  • 6.874 (1)
  • 8.252 (2)
  • 8.752 (2)
  • 13.11 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (5)
  • 41.3 (1)
  • 47.6 (1)
  • 57.2 (2)
  • 88.9 (1)
  • 100.0 (8)
  • 106.0 (36)
  • 139.7 (1)
  • 150.0 (2)
  • 174.6 (1)
  • 209.6 (2)
  • 222.3 (2)
  • 333.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (12)
to
Maximum Axial Groove Diameter
  • 393.661 (12)
to
Cutting Direction
  • B (8)
  • E (9)
  • S (28)
Rake Angle Style
  • DOUBLE NEGATIVE (30)
  • NEGATIVE-ZERO (4)
  • NEUTRAL (ZERO) (9)
Maximum Bore Depth
  • 70.0 (42)
to
Maximum Bore Depth
  • 2.756 (42)
to
Boring Bar Material
  • S (10)
frontEnd
Clamp Style
  • M (46)
  • N (13)
  • P (20)
Adapter Front-End
  • CARTRIDGE MOUNT (2)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (22)
  • D-DIAMOND/RHOMBIC 55 (16)
  • R-ROUND (6)
  • S-SQUARE 90 (16)
  • TN-TOP NOTCH (13)
  • V-DIAMOND/RHOMBIC 35 (4)
  • W-TRIGON 80 (2)
Front End Type
  • KMC - Cartridge Mount Kenna (2)
Cutting Width
  • 1.0 (3)
  • 1.19 (1)
  • 1.194 (3)
  • 1.2 (3)
  • 1.5 (3)
  • 1.57 (3)
  • 1.575 (3)
  • 1.75 (3)
  • 1.829 (3)
  • 1.981 (3)
  • 2.0 (3)
  • 2.2 (3)
  • 2.235 (3)
  • 2.24 (2)
  • 2.25 (1)
  • 2.388 (3)
  • 2.39 (1)
  • 2.464 (3)
  • 2.5 (3)
  • 2.667 (3)
  • 2.743 (3)
  • 2.75 (3)
  • 2.794 (3)
  • 2.997 (3)
  • 3.0 (7)
  • 3.099 (3)
  • 3.17 (3)
  • 3.175 (7)
  • 3.18 (2)
  • 3.2 (7)
  • 3.25 (3)
  • 3.251 (3)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (7)
  • 3.607 (3)
  • 3.96 (3)
  • 3.962 (3)
  • 3.974 (2)
  • 3.988 (3)
  • 4.0 (7)
  • 4.24 (1)
  • 4.242 (7)
  • 4.25 (2)
  • 4.3 (3)
  • 4.5 (7)
  • 4.521 (3)
  • 4.699 (5)
  • 4.775 (7)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (3)
  • 4.801 (7)
  • 4.81 (3)
  • 4.88 (2)
  • 4.95 (3)
  • 5.0 (4)
  • 5.004 (8)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.537 (2)
  • 5.563 (4)
  • 6.0 (8)
  • 6.35 (10)
  • 6.36 (2)
  • 6.48 (4)
  • 7.01 (4)
  • 7.137 (6)
  • 7.925 (6)
  • 8.001 (2)
  • 8.738 (4)
  • 8.992 (4)
  • 9.525 (6)
  • 9.65 (4)
  • 9.73 (2)
to
Cutting Width
  • 0.0394 (3)
  • 0.047 (3)
  • 0.0472 (3)
  • 0.0591 (3)
  • 0.062 (3)
  • 0.0689 (3)
  • 0.072 (3)
  • 0.078 (3)
  • 0.0787 (3)
  • 0.079 (2)
  • 0.0866 (3)
  • 0.088 (3)
  • 0.0886 (1)
  • 0.094 (3)
  • 0.097 (3)
  • 0.0984 (3)
  • 0.105 (3)
  • 0.108 (3)
  • 0.1083 (3)
  • 0.11 (3)
  • 0.118 (3)
  • 0.1181 (7)
  • 0.122 (3)
  • 0.125 (7)
  • 0.126 (7)
  • 0.128 (3)
  • 0.131 (2)
  • 0.1378 (7)
  • 0.142 (3)
  • 0.156 (3)
  • 0.157 (3)
  • 0.1574 (7)
  • 0.1575 (7)
  • 0.167 (7)
  • 0.1673 (2)
  • 0.169 (3)
  • 0.1771 (7)
  • 0.1772 (7)
  • 0.178 (3)
  • 0.185 (5)
  • 0.188 (7)
  • 0.189 (7)
  • 0.192 (2)
  • 0.195 (3)
  • 0.1969 (4)
  • 0.197 (8)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.218 (2)
  • 0.219 (4)
  • 0.2362 (8)
  • 0.25 (10)
  • 0.255 (4)
  • 0.276 (4)
  • 0.281 (6)
  • 0.312 (6)
  • 0.315 (2)
  • 0.344 (4)
  • 0.354 (4)
  • 0.375 (6)
  • 0.38 (4)
  • 0.383 (2)
to
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
  • 7.61 (2)
  • 10.54 (2)
  • 40.15 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
  • 0.294 (2)
  • 0.3 (2)
  • 0.415 (2)
  • 1.5807 (2)
to
Insert Size
  • 3 (3)
  • 4 (4)
  • 5 (4)
  • 6 (2)
Front End Style
  • KMC-29WID/MAN SerratedBlade Mt (2)
Gage Length