Sujeción P
-
P Acero (3)
-
P0Aceros con bajo contenido de carbono, virutas largas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (3)
-
P1Aceros con bajo contenido de carbono, virutas cortas C < 0,25 %; <125 HB; <530 N/mm^2 UTS (3)
-
P2Aceros al carbono medios y altos C < 0,25 %; <220 HB; <25 HRC; >530 N/mm^2 UTS (3)
-
P3Aceros aleados y aceros para herramientas C > 0,25 %; <330 HB; <35 HRC; entre 600 y 850 N/mm^2 UTS (3)
-
P4Aceros aleados y aceros para herramientas C > 0,25 %; entre 350 y 420 HB; entre 35 y 43 HRC; entre 850 y 1400 N/mm^2 UTS (3)
-
P5Aceros ferríticos, martensíticos e inoxidables PH <330 HB; <35 HRC; entre 600 y 900 N/mm^2 UTS (3)
-
P6Aceros ferríticos, martensíticos e inoxidables PH de alta resistencia Entre 350 y 450 HB; entre 35 y 43 HRC; entre 900 y 2400 N/mm^2 UTS (3)
-
-
M Acero inoxidable (1)
-
M1Acero inoxidable austenítico Entre 130 y 200 HB; <600 N/mm^2 UTS (1)
-
M2Aceros inoxidables fundidos e inoxidables austeníticos de alta resistencia Entre 150 y 230 HB; <25 HRC; <600 N/mm^2 UTS (1)
-
M3Acero inoxidable dúplex Entre 135 y 275 HB; <30 HRC; entre 500 y 1200 N/mm^2 UTS (1)
-
-
K Fundición (3)
-
K1Fundición gris Entre 120 y 290 HB; <32 HRC; entre 125 y 500 N/mm^2 UTS (3)
-
K2Fundiciones dúctiles y CGI de baja y media resistencia Entre 130 y 260 HB; <28 HRC; <600 N/mm^2 UTS (3)
-
K3Fundición austenítica y dúctil de alta resistencia Entre 180 y 350 HB; <43 HRC; >600 N/mm^2 UTS (3)
-
-
N Materiales no ferrosos (1)
-
N1Aluminio forjado (1)
-
N2Aleaciones de aluminio bajo en silicio y aleaciones de magnesio Si <12,2 % (1)
-
N4Base de cobre, latón, zinc en un rango de índice de maquinabilidad de 70–100 (1)
-
N5Nylon, plásticos, gomas, fenólicos, resinas y fibra de vidrio (1)
-
N6Carbono, compuestos de grafito, CFRP (1)
-
N7MMC (1)
-
-
S Aleaciones de alta temperatura (1)
-
S1Aleaciones basadas en hierro, resistentes al calor Entre 160 y 260 HB; entre 25 y 48 HRC; entre 500 y 1200 N/mm^2 UTS (1)
-
S2Aleaciones basadas en cobalto, resistentes al calor Entre 250 y 450 HB; entre 25 y 48 HRC; entre 1000 y 1450 N/mm^2 UTS (1)
-
S3Aleaciones basadas en níquel, resistentes al calor Entre 160 y 450 HB; <48 HRC; entre 600 y 1700 N/mm^2 UTS (1)
-
S4Titanio y aleaciones de titanio Entre 300 y 450 HB; entre 33 y 43 HRC; entre 900 y 1600 N/mm^2 UTS (1)
-
-
H Materiales endurecidos (1)
-
H1Materiales endurecidos 44-48 HRC (1)
-
H2Materiales endurecidos 48-55 HRC (1)
-
H3Materiales endurecidos 56-60 HRC (1)
-
-
C Materiales CFRP (1)
-
C1CFRP, CFRP/CFRP (1)
-
C2CFRP/aluminio CFRP/materiales no ferrosos (1)
-
-
Facing (2)
-
Multiple Direction Cutting (3)
-
Plunge Turning (3)
-
Profiling (3)
-
Turning (3)
-
Heavily Interrupted Cut (1)
-
Lightly Interrupted Cut (3)
-
Smooth Cut (3)
-
3.938 in (2)
-
4.331 in (1)
-
100.0 mm (2)
-
110.0 mm (1)
-
0.394 in (1)
-
0.492 in (1)
-
0.63 in (1)
-
10.0 mm (1)
-
12.5 mm (1)
-
16.0 mm (1)
-
CG4 (1)
-
CL4 (1)
-
CM3 (1)
-
CM5 (1)
-
CPX (1)
-
GX (1)
-
K313 (1)
-
K420 (2)
-
K68 (1)
-
KC5010 (1)
-
KC730 (1)
-
KC8050 (1)
-
KC850 (1)
-
KC9010 (1)
-
KC9110 (2)
-
KC9125 (2)
-
KC9240 (2)
-
KC9240NEW (2)
-
KC9315 (1)
-
KCK15B (1)
-
KCK20 (1)
-
KCK20B (1)
-
KCM25 (1)
-
KCP10 (2)
-
KCP10B (1)
-
KCP25 (2)
-
KCP25B (2)
-
KCP25C (3)
-
KCP30 (1)
-
KCPK05 (1)
-
KCS10 (1)
-
KCU10 (1)
-
KCU10B (1)
-
KCU25 (1)
-
KM1 (1)
-
KY1615 (1)
-
MC2 (1)
-
NL300 (1)
-
NL920 (1)
-
10.0 mm (1)
-
12.5 mm (1)
-
16.0 mm (1)
-
0.394 in (1)
-
0.492 in (1)
-
0.63 in (1)
-
1.581 in (1)
-
1.974 in (1)
-
2.368 in (1)
-
40.151 mm (1)
-
50.151 mm (1)
-
60.151 mm (1)
-
C A (1)
-
H T (1)
-
H W (3)