successfully added to cart
View Cart
COVID-19: How WIDIA is responding

Portaherramientas

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (140)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (140)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (140)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (140)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (140)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (140)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (140)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (140)
  • M Stainless Steel (140)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (140)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (140)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (140)
  • K Cast Iron (140)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (140)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (140)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (140)
  • N Non-Ferrous Materials (140)
    • N1
      Wrought Aluminum
      (140)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (140)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (140)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (93)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (140)
    • N6
      Carbon, Graphite Composites, CFRP
      (140)
    • N7
      MMC's
      (93)
  • S High-Temp Alloys (140)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (140)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (140)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (140)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (140)
  • H Hardened Materials (58)
    • H1
      Hardened Materials 44-48 HRC
      (58)
    • H2
      Hardened Materials 48-55 HRC
      (58)
Select First Choice
  • IN (1)
Applications
  • Cut-Off Cut-Off (139)
  • Deep Grooving Deep Grooving (139)
  • Face Grooving Face Grooving (139)
  • Grooving Grooving (139)
  • ID Facing ID Facing (139)
  • ID Grooving ID Grooving (139)
  • ID Thread Turning ID Thread Turning (139)
  • Multiple Direction Cutting Multiple Direction Cutting (140)
  • OD Thread Turning OD Thread Turning (141)
  • Profiling Profiling (139)
  • TRN Boring TRN Boring (139)
  • Threading Threading (139)
  • Turning Turning (139)
Type of Thread
  • 60 (129)
  • ACME (92)
  • API RD (49)
  • BSW (26)
  • BUTTRESS (23)
  • STUB ACME (49)
  • UN (111)
  • UNJ (26)
Cutting Condition
  • Heavily Interrupted Cut (133)
  • Lightly Interrupted Cut (133)
  • Smooth Cut (133)
  • Varying Depth of Cut (133)
Tool Cutting Edge Angle
  • 90.0 (144)
to
Connection Style
  • Toolholder (98)
Cutting Edges Per Insert
  • 1.0 (129)
  • 2.0 (140)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.076 (71)
  • 0.089 (44)
  • 0.09 (70)
  • 0.1 (44)
  • 0.102 (67)
  • 0.16 (18)
  • 0.165 (85)
  • 0.18 (22)
  • 0.185 (22)
  • 0.19 (129)
  • 0.191 (129)
  • 0.198 (26)
  • 0.2 (49)
  • 0.224 (26)
  • 0.235 (26)
  • 0.254 (26)
  • 0.3 (26)
  • 0.315 (67)
  • 0.318 (71)
  • 0.33 (26)
  • 0.34 (26)
  • 0.343 (26)
  • 0.356 (23)
  • 0.43 (49)
  • 0.5 (44)
  • 0.565 (18)
  • 0.57 (23)
  • 0.572 (85)
  • 0.575 (62)
  • 0.75 (44)
  • 0.787 (93)
  • 1.0 (93)
  • 1.194 (93)
  • 1.195 (23)
  • 1.25 (93)
  • 1.5 (93)
  • 1.585 (49)
  • 1.588 (85)
  • 1.59 (18)
  • 1.75 (93)
  • 1.98 (23)
  • 1.981 (26)
  • 2.0 (85)
  • 2.25 (85)
  • 2.388 (85)
  • 2.5 (36)
  • 3.175 (36)
  • 3.18 (18)
to
Corner Radius
  • 0.003 (71)
  • 0.0035 (70)
  • 0.004 (67)
  • 0.0065 (85)
  • 0.0075 (129)
  • 0.0078 (26)
  • 0.008 (49)
  • 0.0088 (26)
  • 0.0093 (26)
  • 0.01 (26)
  • 0.0118 (26)
  • 0.0125 (89)
  • 0.013 (26)
  • 0.0135 (26)
  • 0.014 (23)
  • 0.017 (49)
  • 0.0197 (44)
  • 0.0225 (85)
  • 0.0295 (44)
  • 0.031 (93)
  • 0.0394 (93)
  • 0.047 (93)
  • 0.0492 (93)
  • 0.0591 (93)
  • 0.0625 (85)
  • 0.0689 (93)
  • 0.078 (49)
  • 0.0787 (85)
  • 0.0886 (85)
  • 0.094 (85)
  • 0.0984 (36)
  • 0.125 (36)
to
application
Grade Of Cutting Tool
  • THM (93)
  • TN10P (89)
  • TN6010 (129)
  • TN6025 (140)
  • TN7110 (129)
  • WU10HT (26)
  • WU10PT (58)
  • WU25PT (23)
Hand Of Tool
  • L (46)
  • R (52)
Wiper Insert
  • N (140)
Minimum Axial Groove Diameter
  • 0.0 (86)
  • 1.626 (42)
  • 1.874 (42)
  • 2.2 (4)
  • 2.252 (29)
  • 2.375 (2)
  • 2.5 (4)
  • 3.0 (2)
  • 3.5 (46)
  • 5.5 (42)
  • 6.874 (42)
  • 8.252 (29)
  • 8.752 (29)
  • 13.11 (4)
to
Minimum Axial Groove Diameter
  • 0.0 (86)
  • 41.3 (42)
  • 47.6 (42)
  • 55.88 (4)
  • 57.2 (29)
  • 60.325 (2)
  • 63.5 (4)
  • 76.2 (2)
  • 88.9 (46)
  • 139.7 (42)
  • 174.6 (42)
  • 209.6 (29)
  • 222.3 (29)
  • 333.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (133)
to
Maximum Axial Groove Diameter
  • 393.661 (133)
to
Cutting Direction
  • E (98)
Rake Angle Style
  • NEUTRAL (ZERO) (98)
Maximum Bore Depth
  • 12.7 (2)
  • 25.4 (9)
  • 50.8 (33)
  • 63.5 (2)
to
Maximum Bore Depth
  • 0.5 (2)
  • 1.0 (9)
  • 2.0 (33)
  • 2.5 (2)
to
frontEnd
Clamp Style
  • N (144)
Insert Shape
  • TN-TOP NOTCH (144)
Cutting Width
  • 0.5 (44)
  • 0.787 (44)
  • 0.8 (44)
  • 1.0 (93)
  • 1.041 (22)
  • 1.19 (45)
  • 1.194 (71)
  • 1.2 (93)
  • 1.4 (44)
  • 1.473 (44)
  • 1.5 (93)
  • 1.56 (22)
  • 1.57 (71)
  • 1.575 (93)
  • 1.7 (44)
  • 1.75 (93)
  • 1.829 (49)
  • 1.95 (44)
  • 1.981 (49)
  • 2.0 (93)
  • 2.2 (93)
  • 2.24 (26)
  • 2.25 (67)
  • 2.388 (93)
  • 2.39 (23)
  • 2.5 (93)
  • 2.75 (93)
  • 3.0 (129)
  • 3.17 (49)
  • 3.175 (129)
  • 3.18 (18)
  • 3.2 (49)
  • 3.245 (44)
  • 3.25 (49)
  • 3.5 (129)
  • 3.73 (22)
  • 3.84 (44)
  • 3.96 (23)
  • 3.962 (49)
  • 3.974 (26)
  • 4.0 (85)
  • 4.24 (23)
  • 4.25 (26)
  • 4.5 (85)
  • 4.775 (49)
  • 4.785 (18)
  • 4.788 (18)
  • 4.8 (49)
  • 4.801 (85)
  • 4.88 (26)
  • 4.95 (49)
  • 5.0 (36)
  • 5.004 (4)
  • 5.5 (36)
  • 6.0 (36)
  • 6.35 (36)
  • 6.36 (18)
to
Cutting Width
  • 0.0197 (44)
  • 0.031 (44)
  • 0.0315 (44)
  • 0.0394 (93)
  • 0.041 (22)
  • 0.047 (93)
  • 0.0472 (93)
  • 0.0551 (44)
  • 0.058 (44)
  • 0.0591 (93)
  • 0.062 (93)
  • 0.0669 (44)
  • 0.0689 (93)
  • 0.072 (49)
  • 0.0768 (44)
  • 0.078 (49)
  • 0.0787 (93)
  • 0.0866 (93)
  • 0.088 (26)
  • 0.0886 (67)
  • 0.094 (93)
  • 0.0984 (93)
  • 0.1083 (93)
  • 0.1181 (129)
  • 0.125 (129)
  • 0.126 (49)
  • 0.1278 (44)
  • 0.128 (49)
  • 0.1378 (129)
  • 0.147 (22)
  • 0.151 (44)
  • 0.156 (49)
  • 0.1574 (85)
  • 0.1575 (85)
  • 0.167 (23)
  • 0.1673 (26)
  • 0.1771 (85)
  • 0.1772 (85)
  • 0.188 (85)
  • 0.189 (85)
  • 0.192 (26)
  • 0.195 (49)
  • 0.1969 (36)
  • 0.197 (4)
  • 0.2165 (36)
  • 0.2166 (18)
  • 0.2362 (36)
  • 0.25 (36)
to
Maximum Cutting Depth
  • 3.505 (24)
  • 3.51 (20)
  • 3.81 (2)
  • 5.33 (12)
  • 5.334 (35)
  • 5.715 (1)
  • 6.35 (2)
  • 7.468 (24)
  • 7.47 (10)
  • 7.62 (2)
  • 8.484 (5)
  • 10.54 (2)
  • 10.541 (5)
to
Maximum Cutting Depth
  • 0.138 (28)
  • 0.1382 (16)
  • 0.15 (2)
  • 0.2098 (12)
  • 0.21 (35)
  • 0.225 (1)
  • 0.25 (2)
  • 0.294 (24)
  • 0.2941 (10)
  • 0.3 (2)
  • 0.334 (5)
  • 0.415 (7)
to
Insert Size
  • 1 (3)
  • 2 (52)
  • 3 (52)
  • 4 (27)
  • 5 (7)
  • 6 (3)
insertGeometry
Cutting Tool Material
  • H W (140)
backEnd
Connection Type
  • SQUARE SHANK (98)
other
Grade
  • W (144)
Platform
  • TopThread TopGroove (123)
Tool Unit
  • I (96)
  • M (48)
Over All Length [L]
  • 63.5 (4)
  • 70.0 (2)
  • 80.0 (2)
  • 88.9 (2)
  • 100.0 (4)
  • 101.6 (2)
  • 114.3 (16)
  • 125.0 (8)
  • 127.0 (15)
  • 150.0 (16)
  • 152.4 (51)
  • 170.0 (16)
  • 177.8 (6)
to
Over All Length [L]
  • 2.5 (4)
  • 2.7559 (2)
  • 3.1496 (2)
  • 3.5 (2)
  • 3.937 (4)
  • 4.0 (2)
  • 4.5 (16)
  • 4.9213 (8)
  • 5.0 (15)
  • 5.9055 (14)
  • 5.906 (2)
  • 6.0 (51)
  • 6.6929 (16)
  • 7.0 (6)
to
Insert Hand
  • L (70)
  • R (70)
obsoleteFacet
  • true (144)
  • false (66)
Cutting Condition Material
  • H-All (133)
  • K-All (133)
  • M-All (133)
  • N-All (133)
  • P-All (133)
  • S-All (133)
No filters matching ""
View Products in
Metric
Inch
TopThread™

Toolholders
(16 Products)
  • Face GroovingFace Grooving
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [B3] Head Back Offset [B3] Head Back Offset [L3] Head Back Length [L3] Head Back Length Gage Insert Clamp Screw ID Drive Size
3637531 NASL062D NASL062D W 2 9.5250 .3750 9.5250 .3750 9.5250 .3750 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380 1.7780 .0700 22.2250 .8750 N.2L 7/64
    Your price::
    Qty
    3636534 NASL082D NASL082D W 2 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
      List price:
      $89.13 /each.
      Your price::
      Qty
      3637497 NASL083D NASL083D W 3 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.750 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3L 25 IP
        Your price::
        Qty
        3641691 NASL1010M2Q NASL1010M2Q W 2 10.0000 .3937 10.0000 .3937 10.0000 .3937 150.0000 5.906 19.000 .7480 9.0000 .3543 3.5100 .1382 2.0300 .0799 19.3500 .7618 N.2L T10
          Your price::
          Qty
          3637489 NASL102B NASL102B W 2 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
            Your price::
            Qty
            3636524 NASL103B NASL103B W 3 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 31.750 1.250     5.3340 .2100         N.3L 25 IP
              List price:
              $90.5 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              TopThread™

              Toolholders
              (46 Products)
              • ThreadingThreading
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
              3637525 NEL062 NEL062 W 2 9.5250 .3750 9.5250 .3750 19.0500 .7500 63.5000 2.500 12.700 .5000 12.7000 .5000     3.5050 .1380 N.2R 7/64
                Your price::
                Qty
                3637503 NEL122B NEL122B W 2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 12.700 .5000 25.4000 1.000 7.3660 .2900 3.5050 .1380 N.2R 7/64
                  List price:
                  $94.71 /each.
                  Your price::
                  Qty
                  3632144 NEL123B NEL123B W 3 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
                    Your price::
                    Qty
                    3641684 NEL1616H2 NEL1616H2 W 2 16.0000 .6300 16.0000 .6300 20.0000 .7870 100.0000 3.937 15.000 .5906 63.5000 2.500     3.5100 .1380 N.2R T10
                      Your price::
                      Qty
                      3637500 NEL162C NEL162C W 2 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 12.700 .5000 25.4000 1.000 10.4140 .4100 3.5050 .1380 N.2R 7/64
                        List price:
                        $97.75 /each.
                        Your price::
                        Qty
                        3632155 NEL163C NEL163C W 3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
                          List price:
                          $97.75 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          Guía para la selección de materiales de roscado

                          Portaherramientas
                          (54 Products)
                          • Face GroovingFace Grooving
                          • GroovingGrooving
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                          3632161 NSL062 NSL062 W 2 9.5250 .3750 9.5250 .3750 14.2750 .5620 63.5000 2.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                            Your price::
                            Qty
                            3637485 NSL082V NSL082V W 2 12.7000 .5000 12.7000 .5000 19.0500 .7500 88.9000 3.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                              List price:
                              $46.27 /each.
                              Your price::
                              Qty
                              3641683 NSL1010E2 NSL1010E2 W 2 10.0000 .3937 10.0000 .3937 14.0000 .5512 70.0000 2.755 19.0000 .7480 8.8000 .3465 3.5100 .1382 N.2L T10
                                List price:
                                $48.0 /each.
                                Your price::
                                Qty
                                3637510 NSL102B NSL102B W 2 15.8750 .6250 15.8750 .6250 22.2250 .8750 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                                  List price:
                                  $91.81 /each.
                                  Your price::
                                  Qty
                                  3641681 NSL1212F2 NSL1212F2 W 2 12.0000 .4724 12.0000 .4724 16.0000 .6299 80.0000 3.149 19.0000 .7480 8.8000 .3465 3.5100 .1382 N.2L T10
                                    Your price::
                                    Qty
                                    3632145 NSL122B NSL122B W 2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                                      List price:
                                      $94.71 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      TopGroove™

                                      Toolholders
                                      (22 Products)
                                      • GroovingGrooving
                                      • Face GroovingFace Grooving
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size Shim Screw ID Drive Size
                                      3632151 NSL164C NSL164C W 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                        Your price::
                                        Qty
                                        3639040 NSL164D NSL164D W 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                          List price:
                                          $98.79 /each.
                                          Your price::
                                          Qty
                                          3641699 NSL204C NSL204C W 31.7500 1.250 31.7500 1.250 38.1000 1.500 127.0000 5.000 35.0520 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                            Your price::
                                            Qty
                                            3639036 NSL204D NSL204D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                              List price:
                                              $116.34 /each.
                                              Your price::
                                              Qty
                                              3637507 NSL206D NSL206D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.052 1.380 17.0180 .6700 8.4840 .3340 N.6L 5/32 1/16
                                                Your price::
                                                Qty
                                                3637505 NSL244D NSL244D W 38.1000 1.500 38.1000 1.500 50.8000 2.000 152.4000 6.000 38.1000 1.500 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  TopGroove™

                                                  Toolholders
                                                  (6 Products)
                                                  • GroovingGrooving
                                                  • Face GroovingFace Grooving
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                                                  3637518 NSLDH203D NSLDH203D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.750 1.250 15.7480 .6200 5.3340 .2100 N.3L 25 IP
                                                    List price:
                                                    $164.65 /each.
                                                    Your price::
                                                    Qty
                                                    3637547 NSRDH122B NSRDH122B W 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.050 .7500 10.1600 .4000 3.5050 .1380 N.2R 7/64
                                                      Your price::
                                                      Qty
                                                      3637499 NSRDH163C NSRDH163C W 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.750 1.250 14.7320 .5800 5.3340 .2100 N.3R 25 IP
                                                        Your price::
                                                        Qty
                                                        3637528 NSRDH163D NSRDH163D W 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.750 1.250 14.7320 .5800 5.3340 .2100 N.3R 25 IP
                                                          List price:
                                                          $140.95 /each.
                                                          Your price::
                                                          Qty
                                                          3637511 NSRDH203D NSRDH203D W 31.7500 1.250 31.7500 1.250