Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences
Suggestions de produit
Product Family suggestions
Bonjour, User Name
Votre compte sélectionné :
Il y a un problème avec votre compte. Veuillez contacter le service client.
Compte Client
Modifier le compte
Compte de livraison
Modifier le compte
- Tableau de bord
- Gérer les commandes
- Gérer les canaux
- Carnet d’adresses
-
Notifications
Mark all as read - Modifier le mot de passe
- Mon profil
- Se déconnecter
Article(s)
ajoutées avec succès au panier
Voir le panier
Voir le panier
Article(s)
ajoutées avec succès au panier
Voir le panier
Voir le panier
Édition de la Solution
Ajout de Solution
Nom de la Solution: {{SolutionName}}- Produits
- /
- SuperFeed • Face Mills • Inch
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
SuperFeed • Face Mills • Inch
Tool Bodies • Face Mills
Features and benefits
- Through coolant capability.
- +/- 3 micron axial adjustment range.
- Balanced design.
- Easy setup in a simple system design.
- Modified standards available.
Uses and application
- Surfaçage
- Fraisage de côté/avec épaulement : Bout plat
- Fraisage — Arrosage interne
- Fraisage — 3 tailles
- 38489
Guide de sélection des plaquettes
Material Group | Light
|
General
|
Heavy
|
|||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | – | – | – | – | – | – |
K3 | – | – | – | – | – | – |
N1–N2 | SDR…/EDR… | WDN00U | SDR…/EDR… | WDN00U | SDR…/EDR… | WDN00U |
N3 | SDR…/EDR… | WDN00U | SDR…/EDR… | WDN00U | SDR…/EDR… | WDN00U |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Avances de départ recommandées [mm]
ae/D1 = | 0,2 | 0,3 | 0,4 |
fz-Factor | 1,5 | 1,3 | 1,0 |
vc-Factor | 1,3 | 1,2 | 1,1 |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
SDR… | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | 0,05 | 0,10 | 0,20 | SDR… |
EDR… | 0,08 | 0,17 | 0,33 | 0,06 | 0,13 | 0,25 | 0,06 | 0,11 | 0,22 | 0,05 | 0,10 | 0,20 | 0,05 | 0,10 | 0,20 | EDR… |
Light
|
General
|
Heavy
|
ae/D1 = | 0,2 | 0,3 | 0,4 |
fz-Factor | 1,5 | 1,3 | 1,0 |
vc-Factor | 1,3 | 1,2 | 1,1 |
Recommended Starting Feeds [IPT]
ae/D1 = | 0.2 | 0.3 | 0.4 |
fz-Factor | 1.5 | 1.3 | 1.0 |
vc-Factor | 1.3 | 1.2 | 1.1 |
Light
|
General
|
Heavy
|
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
SDR… | .003 | .007 | .011 | .003 | .005 | .008 | .002 | .004 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | SDR… |
EDR… | .003 | .007 | .011 | .003 | .005 | .008 | .002 | .004 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | EDR… |
ae/D1 = | 0.2 | 0.3 | 0.4 |
fz-Factor | 1.5 | 1.3 | 1.0 |
vc-Factor | 1.3 | 1.2 | 1.1 |
Vitesses de départ recommandées [m/mn]
ae/D1 = | 0,2 | 0,3 | 0,4 |
fz-Factor | 1,5 | 1,3 | 1,0 |
vc-Factor | 1,3 | 1,2 | 1,1 |
ae/D1 = | 0,2 | 0,3 | 0,4 |
fz-Factor | 1,5 | 1,3 | 1,0 |
vc-Factor | 1,3 | 1,2 | 1,1 |
Material Group | WDN00U | |||
P | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
5 | – | – | – | |
6 | – | – | – | |
M | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
K | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
N | 1–2 | 910 | 1980 | 4880 |
3 | 460 | 610 | 760 | |
S | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
H | 1 | – | – | – |
Recommended Starting Speeds [SFM]
ae/D1 = | 0.2 | 0.3 | 0.4 |
fz-Factor | 1.5 | 1.3 | 1.0 |
vc-Factor | 1.3 | 1.2 | 1.1 |
Material Group | WDN00U | |||
P | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
5 | – | – | – | |
6 | – | – | – | |
M | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
K | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
N | 1–2 | 3000 | 6500 | 16000 |
3 | 1500 | 2000 | 2500 | |
S | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
H | 1 | – | – | – |
ae/D1 = | 0.2 | 0.3 | 0.4 |
fz-Factor | 1.5 | 1.3 | 1.0 |
vc-Factor | 1.3 | 1.2 | 1.1 |