| Numéro de matériaux SAP | 6441877 |
| Réf. catalogue ISO | 7FNS10004 |
| Réf. catalogue ANSI | 7FNS10004 |
| Nuance | ALTIN-MT |
| Style adaptateur du côté machine | Straight-Cylindrical |
| [D3] Diamètre de la partie cylindrique du corps | 8.5250 mm |
| [D3] Diamètre de la partie cylindrique du corps | .3356 in |
| [L3] Longueur exploitable | 31.2500 mm |
| [L3] Longueur exploitable | 1.230 in |
| [Re] Rayon de bec | 0.5950 mm |
| [Re] Rayon de bec | .0234 in |
| Ray du Prog I Cor théorique [RT] | 1.0135 mm |
| Ray du Prog I Cor théorique [RT] | .0399 in |
| [Z] Nombre de goujures | 6 |
| [D1] Diamètre effectif de coupe | 9.5250 mm |
| [D1] Diamètre effectif de coupe | .3750 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 9.525 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .375 in |
| [L] Longueur totale | 88.9000 mm |
| [L] Longueur totale | 3.500 in |
Dimensions de l'outil : Configuration des goujures : 6 
Angle d'hélice : 20°
Corner Style: Torus
Ramping : Ébauche
Profilage 3D| 7FNS Inch | |||||||||||||||
| Geometrical Parameters | Ramping Guide for Circular and Linear Interpolation | ||||||||||||||
| Circular Interpolation | Linear Interpolation | ||||||||||||||
| Allowed Range of Hole Diameter | Calculated Length (mm) per Ramp Angle | ||||||||||||||
| diameter | Ap1 max | Rfm | Rt | Rc | Xfm | Yfm | YD | Number | Ramp Angle (degree) | ||||||
| [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | [inch] | flutes | Smallest | Largest | 1 | 2 | 3 | 4 | 5 |
| 1/4 | 0.0133 | 1/4 | 0.0269 | 0.0160 | 0.0133 | 0.0313 | 0.0525 | 6 | 0.355 | 0.5 | 0.76 | 0.38 | 0.25 | 0.19 | 0.15 |
| 3/8 | 0.0200 | 3/8 | 0.0399 | 0.0235 | 0.0200 | 0.0469 | 0.0788 | 6 | 0.5325 | 0.75 | 1.14 | 0.57 | 0.38 | 0.29 | 0.23 |
| 1/2 | 0.0266 | 1/2 | 0.0538 | 0.0320 | 0.0266 | 0.0625 | 0.1050 | 6 | 0.71 | 1 | 1.52 | 0.76 | 0.51 | 0.38 | 0.30 |
| 5/8 | 0.0333 | 5/8 | 0.0672 | 0.0400 | 0.0333 | 0.0781 | 0.1313 | 6 | 0.8875 | 1.25 | 1.91 | 0.95 | 0.63 | 0.48 | 0.38 |
| 3/4 | 0.0399 | 3/4 | 0.0798 | 0.0470 | 0.0399 | 0.0938 | 0.1575 | 6 | 1.065 | 1.5 | 2.29 | 1.14 | 0.76 | 0.57 | 0.46 |
| 1 | 0.0532 | 1 | 0.1059 | 0.0620 | 0.0532 | 0.1250 | 0.2100 | 6 | 1.42 | 2 | 3.05 | 1.52 | 1.02 | 0.76 | 0.61 |
| Recommended Feed | 30% | 30% | 30% | 30% | 10% | ||||||||||
 <="" td=""> |  <="" td="" /> |
|||||||||||||
| Profile Milling | AlTiN-MT | Recommended feed per tooth (IPT = inch/th) for 3D milling/profiling (A) | ||||||||||||
| A | Cutting Speed Vc SFM | D1 Diameter | ||||||||||||
| frac. | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||
| Material Group | ap | ae | Min | Max | dec. | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.000 | ||
| M | 1 | 0.05 x D | 0.55 x D | 290 | – | 375 | IPT | .0118 | .0156 | .0188 | .0213 | .0281 | .0338 | .0450 |
| – | 2 | 0.05 x D | 0.55 x D | 190 | – | 260 | IPT | .0094 | .0125 | .0150 | .0189 | .0250 | .0300 | .0400 |
| – | 3 | 0.05 x D | 0.55 x D | 190 | – | 230 | IPT | .0094 | .0125 | .0150 | .0189 | .0250 | .0300 | .0400 |
| S | 1 | 0.05 x D | 0.55 x D | 160 | – | 300 | IPT | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
| – | 2 | 0.05 x D | 0.55 x D | 80 | – | 130 | IPT | .0008 | .0010 | .0012 | .0015 | .0018 | .0021 | .0024 |
| – | 3 | 0.05 x D | 0.55 x D | 80 | – | 130 | IPT | .0008 | .0010 | .0012 | .0015 | .0018 | .0021 | .0024 |
| – | 4 | 0.05 x D | 0.55 x D | 160 | – | 200 | IPT | .0011 | .0014 | .0017 | .0021 | .0025 | .0028 | .0033 |
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
