D-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (147)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(147)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(147)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(147)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(147)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(147)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(147)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(147)
- M Stainless Steel (135)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(135)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(135)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(135)
- K Cast Iron (145)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(145)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(145)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(145)
- N Non-Ferrous Materials (138)
- N1Wrought Aluminum (138)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(138)
- N3High-Silicon Aluminum Alloys Si >12.2%(66)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (138)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (66)
- N6Carbon, Graphite Composites, CFRP (66)
- N7MMC's (66)
- S High-Temp Alloys (139)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(139)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(139)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(139)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(138)
- H Hardened Materials (105)
- H1Hardened Materials 44-48 HRC(105)
- H2Hardened Materials 48-55 HRC(105)
- H3Hardened Materials 56-60 HRC(105)
- H4Hardened Materials >60 HRC(105)
Select All Star
- DE (23)
- IN (6)
- SG (3)
- US (8)
Applications
Applications
Chamfer Turning (3)
Facing (115)
Multiple Direction Cutting (127)
Profiling (112)
Turning (144)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (145)
- Lightly Interrupted Cut (147)
- Smooth Cut (147)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (14)
- 63.0 (5)
- 72.5 (4)
- 75.0 (20)
- 90.0 (9)
- 93.0 (37)
- 95.0 (50)
- 107.5 (3)
- 117.5 (5)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (78)
- 2.0 (82)
- 3.0 (15)
- 4.0 (119)
- 6.0 (21)
- 8.0 (67)
to
Over All Length [L]
Over All Length [L]
- 4.5 in(7)
- 4.921 in(20)
- 4.9213 in(1)
- 5.0 in(4)
- 5.906 in(32)
- 6.0 in(53)
- 6.693 in(25)
- 6.732 in(1)
- 9.843 in(4)
to
Over All Length [L]
Over All Length [L]
- 114.3 mm(7)
- 125.0 mm(21)
- 127.0 mm(4)
- 150.0 mm(32)
- 152.4 mm(53)
- 170.0 mm(25)
- 171.0 mm(1)
- 250.0 mm(4)
to
Corner Radius
Corner Radius
- 0.004 in(53)
- 0.008 in(64)
- 0.016 in(109)
- 0.024 in(9)
- 0.031 in(140)
- 0.047 in(140)
- 0.063 in(92)
- 0.094 in(15)
- 0.25 in(3)
to
Corner Radius
Corner Radius
- 0.1 mm(53)
- 0.2 mm(64)
- 0.4 mm(109)
- 0.6 mm(9)
- 0.8 mm(140)
- 1.2 mm(140)
- 1.6 mm(92)
- 2.375 mm(1)
- 2.4 mm(15)
- 6.35 mm(3)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (96)
- CW5025 (62)
- PB100 (24)
- THM (55)
- THM-X (48)
- THMF-X (40)
- TN10P (114)
- TN10U (82)
- TN15M (59)
- TN15U (73)
- TN2000 (82)
- TN20K (118)
- TN20P (132)
- TN30M (74)
- TN30P (89)
- TN4000 (82)
- TN6010 (36)
- TTR-X (4)
- TTS (49)
- WBH10P (53)
- WBH10U (24)
- WBH20P (90)
- WBH30P (53)
- WBK40U (12)
- WBK45U (8)
- WDN00U (32)
- WDN25U (66)
- WK05CT (137)
- WK15CT (70)
- WK20CT (137)
- WM15CT (131)
- WM25CT (135)
- WM35CT (126)
- WP05CT (33)
- WP15CT (145)
- WP25CT (145)
- WP35CT (132)
- WS10PT (135)
- WS25PT (138)
- WU10HT (134)
- WU10PT (95)
- WU25PT (95)
Hand Of Tool
Hand Of Tool
- L (61)
- N (12)
- R (74)
Wiper Insert
Wiper Insert
- N (147)
- Y (48)
F Dimension
F Dimension
- 9.5 mm(1)
- 9.52 mm(1)
- 10.0 mm(3)
- 12.0 mm(4)
- 12.6 mm(1)
- 12.62 mm(1)
- 12.7 mm(1)
- 13.0 mm(3)
- 15.5 mm(1)
- 19.5 mm(1)
- 23.16 mm(2)
- 25.0 mm(16)
- 25.4 mm(8)
- 27.0 mm(4)
- 28.65 mm(1)
- 31.75 mm(29)
- 32.0 mm(32)
- 33.55 mm(1)
- 35.0 mm(3)
- 38.1 mm(12)
- 40.0 mm(13)
- 47.02 mm(1)
- 50.0 mm(3)
- 50.8 mm(5)
to
F Dimension
F Dimension
- 0.375 in(1)
- 0.393 in(1)
- 0.394 in(2)
- 0.472 in(4)
- 0.496 in(1)
- 0.497 in(1)
- 0.5 in(1)
- 0.512 in(3)
- 0.61 in(1)
- 0.768 in(1)
- 0.912 in(2)
- 0.984 in(15)
- 0.9843 in(1)
- 1.0 in(8)
- 1.063 in(4)
- 1.128 in(1)
- 1.25 in(29)
- 1.26 in(33)
- 1.321 in(1)
- 1.378 in(3)
- 1.5 in(12)
- 1.575 in(13)
- 1.851 in(1)
- 1.969 in(3)
- 2.0 in(5)
to
Cutting Direction
Cutting Direction
- B (50)
- E (16)
- S (81)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (126)
- NEGATIVE-ZERO (21)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (49)
- D-DIAMOND/RHOMBIC 55 (29)
- R-ROUND (3)
- S-SQUARE 90 (20)
- T-TRIANGLE 60 (6)
- V-DIAMOND/RHOMBIC 35 (25)
- W-TRIGON 80 (15)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (44)
- B L (90)
- C A (96)
- C N (83)
- D P (66)
- H W (147)
Back-End
Shank Height
Shank Height
- 0.75 in(9)
- 0.787 in(10)
- 0.7874 in(1)
- 0.788 in(10)
- 0.984 in(31)
- 0.985 in(1)
- 1.0 in(31)
- 1.25 in(18)
- 1.26 in(26)
- 1.5 in(6)
- 1.575 in(4)
to
Shank Height
Shank Height
- 19.05 mm(9)
- 20.0 mm(21)
- 25.0 mm(31)
- 25.03 mm(1)
- 25.4 mm(31)
- 31.75 mm(18)
- 32.0 mm(26)
- 38.1 mm(6)
- 40.0 mm(4)
to
Shank Width
Shank Width
- 0.75 in(9)
- 0.787 in(11)
- 0.7874 in(1)
- 0.788 in(9)
- 0.984 in(42)
- 1.0 in(35)
- 1.25 in(14)
- 1.26 in(16)
- 1.5 in(6)
- 1.575 in(4)
to
Shank Width
Shank Width
- 19.05 mm(9)
- 20.0 mm(21)
- 25.0 mm(42)
- 25.4 mm(35)
- 31.75 mm(14)
- 32.0 mm(16)
- 38.1 mm(6)
- 40.0 mm(4)
to
No filters matching ""
