ProGroove™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (4)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (4)
- N1Wrought Aluminum (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- N7MMC's (3)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- H Hardened Materials (1)
- H1Hardened Materials 44-48 HRC(1)
- H2Hardened Materials 48-55 HRC(1)
- H3Hardened Materials 56-60 HRC(1)
- H4Hardened Materials >60 HRC(1)
Applications
Applications
Cut-Off (1)
Deep Grooving (2)
Grooving (3)
Turning (1)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (1)
- Smooth Cut (2)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (3)
to
Connection Style
Connection Style
- Toolholder (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
- 3.0 (2)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 3.3858 in(1)
- 3.937 in(1)
- 4.3307 in(3)
- 5.9055 in(2)
to
Over All Length [L]
Over All Length [L]
- 86.0 mm(1)
- 100.0 mm(1)
- 110.0 mm(3)
- 150.0 mm(2)
to
Corner Radius
Corner Radius
- 0.012 in(2)
- 0.016 in(1)
- 0.031 in(2)
- 0.047 in(2)
to
Corner Radius
Corner Radius
- 0.3 mm(2)
- 0.4 mm(1)
- 0.8 mm(2)
- 1.2 mm(2)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (1)
- CW2015 (1)
- THM (2)
- THM X (1)
- THM-F (1)
- THM-X (1)
- TN2000 (1)
- TN4000 (1)
- TN6030 (2)
- TTM08 (2)
- TTM09 (1)
- TTMS (1)
- TTR (2)
- TTR-X (2)
- TTS (2)
- WDN25U (1)
- WK20CT (2)
- WM35CT (1)
- WP15CT (2)
- WP25CT (2)
- WP35CT (2)
Hand Of Tool
Hand Of Tool
- N (3)
Wiper Insert
Wiper Insert
- N (4)
F Dimension
F Dimension
- 0.0 mm(2)
- 3.6 mm(1)
to
F Dimension
F Dimension
- 0.0 in(2)
- 0.1417 in(1)
to
Cutting Direction
Cutting Direction
- E (3)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (1)
- POSITIVE-ZERO (2)
Front-End
Clamp Style
Clamp Style
- C (2)
- Y (1)
Cutting Width
Cutting Width
- 0.1614 in(2)
to
Cutting Width
Cutting Width
- 4.1 mm(2)
to
Insert Shape
Insert Shape
- PRISMATIC (2)
- T-TRIANGLE 60 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.5748 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 40.0 mm(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (1)
Insert Seat Size
Insert Seat Size
- 4 (1)
Cutting Tool Material
Cutting Tool Material
- C A (1)
- D P (1)
- H W (4)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (2)
Shank Height
Shank Height
- 0.7874 in(1)
- 0.9843 in(1)
- 1.0236 in(1)
to
Shank Height
Shank Height
- 20.0 mm(1)
- 25.0 mm(1)
- 26.0 mm(1)
to
Shank Width
Shank Width
- 0.126 in(1)
- 0.5118 in(1)
- 0.7087 in(1)
to
Shank Width
Shank Width
- 3.2 mm(1)
- 13.0 mm(1)
- 18.0 mm(1)
to
No filters matching ""
