KM Micro™ OD Applications • Top Thread and Top Groove
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (10)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
- M Stainless Steel (10)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
- K Cast Iron (10)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
- N Non-Ferrous Materials (10)
- N1Wrought Aluminum (10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
- N6Carbon, Graphite Composites, CFRP (10)
- N7MMC's (10)
- S High-Temp Alloys (10)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
- H Hardened Materials (10)
- H1Hardened Materials 44-48 HRC(10)
- H2Hardened Materials 48-55 HRC(10)
- H3Hardened Materials 56-60 HRC(10)
- H4Hardened Materials >60 HRC(10)
Applications
Applications
Chamfer Turning (8)
Cut-Off (8)
Deep Grooving (8)
Face Grooving (8)
Facing (8)
Grooving (10)
ID Thread Turning (2)
Multiple Direction Cutting (8)
OD Thread Turning (10)
Plunge Turning (8)
Profiling (8)
Turning (8)
Type of Thread
Type of Thread
- 60 (10)
- ACME (2)
- API (2)
- API RD (2)
- BSW (2)
- BUTTRESS (10)
- M (1)
- NPT (2)
- STUB ACME (2)
- UN (10)
- UNJ (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (10)
- Lightly Interrupted Cut (10)
- Smooth Cut (10)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (10)
- 2.0 (10)
to
Over All Length [L]
Over All Length [L]
- 20.0 mm(8)
- 30.0 mm(2)
to
Corner Radius
Corner Radius
- 0.025 mm(1)
- 0.05 mm(1)
- 0.075 mm(10)
- 0.1 mm(10)
- 0.125 mm(2)
- 0.15 mm(2)
- 0.175 mm(6)
- 0.2 mm(10)
- 0.225 mm(2)
- 0.25 mm(6)
- 0.275 mm(1)
- 0.3 mm(2)
- 0.325 mm(2)
- 0.35 mm(6)
- 0.4 mm(2)
- 0.45 mm(2)
- 0.475 mm(1)
- 0.5 mm(10)
- 0.575 mm(2)
- 0.75 mm(8)
- 0.775 mm(10)
- 0.9 mm(2)
- 1.0 mm(10)
- 1.2 mm(10)
- 1.25 mm(10)
- 1.5 mm(10)
- 1.575 mm(2)
- 1.6 mm(10)
- 1.75 mm(10)
- 1.975 mm(2)
- 2.0 mm(2)
- 2.25 mm(2)
- 2.4 mm(2)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (10)
- K420 (10)
- K68 (10)
- KB1630 (2)
- KBH20 (1)
- KC5010 (10)
- KC5025 (10)
- KC5410 (9)
- KC720 (10)
- KC730 (10)
- KC850 (10)
- KCK20 (6)
- KCK20B (10)
- KCP10B (10)
- KCP25B (10)
- KCP25C (10)
- KCU10 (10)
- KCU10B (10)
- KCU25 (10)
- KCU25B (10)
- KD1425 (2)
- KT315 (6)
- THM (10)
- TN6010 (10)
- TN6025 (10)
- WU10HT (1)
- WU10PT (4)
- WU25PT (1)
Hand Of Tool
Hand Of Tool
- L (5)
- R (5)
F Dimension
F Dimension
- 8.0 mm(2)
- 10.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(10)
- 41.3 mm(2)
- 47.6 mm(2)
- 56.625 mm(8)
- 88.9 mm(10)
- 139.7 mm(2)
- 174.6 mm(2)
to
Cutting Direction
Cutting Direction
- E (8)
- S (2)
Front-End
Cutting Width
Cutting Width
- 0.5 mm(8)
- 0.787 mm(8)
- 0.8 mm(8)
- 0.889 mm(4)
- 0.991 mm(8)
- 1.0 mm(10)
- 1.041 mm(8)
- 1.19 mm(9)
- 1.194 mm(10)
- 1.2 mm(10)
- 1.39 mm(8)
- 1.397 mm(4)
- 1.4 mm(8)
- 1.473 mm(8)
- 1.5 mm(10)
- 1.57 mm(6)
- 1.575 mm(10)
- 1.69 mm(4)
- 1.7 mm(8)
- 1.702 mm(8)
- 1.75 mm(10)
- 1.829 mm(2)
- 1.94 mm(4)
- 1.95 mm(8)
- 1.956 mm(4)
- 1.981 mm(2)
- 2.0 mm(10)
- 2.007 mm(8)
- 2.2 mm(10)
- 2.235 mm(6)
- 2.236 mm(1)
- 2.24 mm(8)
- 2.25 mm(9)
- 2.387 mm(1)
- 2.388 mm(10)
- 2.39 mm(1)
- 2.464 mm(2)
- 2.5 mm(10)
- 2.667 mm(2)
- 2.74 mm(4)
- 2.743 mm(4)
- 2.75 mm(10)
- 2.794 mm(2)
- 2.997 mm(6)
- 3.0 mm(10)
- 3.099 mm(2)
- 3.17 mm(2)
- 3.175 mm(10)
- 3.18 mm(4)
- 3.2 mm(6)
- 3.245 mm(8)
- 3.25 mm(2)
- 3.251 mm(1)
- 3.27 mm(4)
- 3.32 mm(1)
- 3.5 mm(10)
- 3.607 mm(2)
- 3.81 mm(4)
- 3.82 mm(4)
- 3.835 mm(4)
- 3.84 mm(8)
- 3.96 mm(2)
- 3.962 mm(2)
- 3.974 mm(1)
- 3.988 mm(2)
- 4.0 mm(2)
- 4.25 mm(2)
- 4.5 mm(2)
- 4.521 mm(2)
- 4.699 mm(2)
- 4.775 mm(2)
- 4.8 mm(2)
- 4.801 mm(2)
- 4.88 mm(1)
- 4.95 mm(2)
- 4.953 mm(1)
- 4.978 mm(2)
to
Insert Size
Insert Size
- 2 (8)
- 3 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (2)
- B L (1)
- D P (2)
- H T (6)
- H W (10)
Back-End
System Size
System Size
- KM12 (2)
- KM16 (8)
Back-End Diameter
Back-End Diameter
- 12.0 mm(2)
- 16.0 mm(8)
to
No filters matching ""
