KM Micro™ ID Application • Top Thread and Top Groove
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (2)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (2)
- S High-Temp Alloys (2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (2)
- H1Hardened Materials 44-48 HRC(2)
- H2Hardened Materials 48-55 HRC(2)
- H3Hardened Materials 56-60 HRC(2)
- H4Hardened Materials >60 HRC(2)
Applications
Applications
Grooving (2)
ID Grooving (2)
ID Thread Turning (2)
OD Thread Turning (2)
Type of Thread
Type of Thread
- 60 (2)
- BUTTRESS (2)
- UN (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (2)
- Lightly Interrupted Cut (2)
- Smooth Cut (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (2)
- 2.0 (2)
to
Corner Radius
Corner Radius
- 0.003 in(2)
- 0.004 in(2)
- 0.007 in(1)
- 0.008 in(2)
- 0.01 in(1)
- 0.014 in(1)
- 0.02 in(2)
- 0.03 in(2)
- 0.031 in(2)
- 0.039 in(2)
- 0.047 in(2)
- 0.049 in(2)
- 0.059 in(2)
- 0.063 in(2)
- 0.069 in(2)
to
Corner Radius
Corner Radius
- 0.075 mm(2)
- 0.1 mm(2)
- 0.175 mm(1)
- 0.2 mm(2)
- 0.25 mm(1)
- 0.35 mm(1)
- 0.5 mm(2)
- 0.75 mm(2)
- 0.775 mm(2)
- 1.0 mm(2)
- 1.2 mm(2)
- 1.25 mm(2)
- 1.5 mm(2)
- 1.6 mm(2)
- 1.75 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (2)
- K420 (2)
- K68 (2)
- KC5010 (2)
- KC5025 (2)
- KC5410 (2)
- KC720 (2)
- KC730 (2)
- KC850 (2)
- KCK20 (1)
- KCK20B (2)
- KCP10B (2)
- KCP25B (2)
- KCP25C (2)
- KCU10 (2)
- KCU10B (2)
- KCU25 (2)
- KCU25B (2)
- KT315 (1)
- THM (2)
- TN6010 (2)
- TN6025 (2)
- WU10PT (1)
Front-End
Cutting Width
Cutting Width
- 0.0197 in(2)
- 0.031 in(2)
- 0.0315 in(2)
- 0.035 in(1)
- 0.039 in(2)
- 0.0394 in(2)
- 0.041 in(2)
- 0.047 in(2)
- 0.0472 in(2)
- 0.055 in(2)
- 0.0551 in(2)
- 0.058 in(2)
- 0.0591 in(2)
- 0.062 in(2)
- 0.0669 in(2)
- 0.067 in(2)
- 0.0689 in(2)
- 0.076 in(1)
- 0.0768 in(2)
- 0.077 in(1)
- 0.0787 in(2)
- 0.079 in(2)
- 0.0866 in(2)
- 0.088 in(2)
- 0.0886 in(2)
- 0.094 in(2)
- 0.0984 in(2)
- 0.108 in(2)
- 0.1083 in(2)
- 0.118 in(1)
- 0.1181 in(2)
- 0.125 in(2)
- 0.126 in(1)
- 0.1278 in(2)
- 0.129 in(1)
- 0.1378 in(2)
- 0.15 in(1)
- 0.151 in(2)
to
Cutting Width
Cutting Width
- 0.5 mm(2)
- 0.787 mm(2)
- 0.8 mm(2)
- 0.889 mm(1)
- 0.991 mm(2)
- 1.0 mm(2)
- 1.041 mm(2)
- 1.19 mm(2)
- 1.194 mm(2)
- 1.2 mm(2)
- 1.39 mm(2)
- 1.397 mm(1)
- 1.4 mm(2)
- 1.473 mm(2)
- 1.5 mm(2)
- 1.57 mm(1)
- 1.575 mm(2)
- 1.69 mm(1)
- 1.7 mm(2)
- 1.702 mm(2)
- 1.75 mm(2)
- 1.94 mm(1)
- 1.95 mm(2)
- 1.956 mm(1)
- 2.0 mm(2)
- 2.007 mm(2)
- 2.2 mm(2)
- 2.235 mm(1)
- 2.24 mm(2)
- 2.25 mm(2)
- 2.388 mm(2)
- 2.5 mm(2)
- 2.74 mm(1)
- 2.743 mm(1)
- 2.75 mm(2)
- 2.997 mm(1)
- 3.0 mm(2)
- 3.175 mm(2)
- 3.18 mm(1)
- 3.2 mm(1)
- 3.245 mm(2)
- 3.27 mm(1)
- 3.5 mm(2)
- 3.81 mm(1)
- 3.82 mm(1)
- 3.835 mm(1)
- 3.84 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- H T (1)
- H W (2)
No filters matching ""
