Steel Shank with Through Coolant
Steel Shank with Through Coolant
Steel Shank with Through Coolant
Steel Shank with Through Coolant

A-PCLN 95°

Steel Shank with Through Coolant

Uses and application

  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368
Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (6)
    • N6
      Carbon, Graphite Composites, CFRP (6)
    • N7
      MMC's (6)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (7)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC (7)
    • H2
      Hardened Materials 48-55 HRC (7)
    • H3
      Hardened Materials 56-60 HRC (7)
    • H4
      Hardened Materials >60 HRC (7)
Select All Star
  • DE (1)
Applications
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Profiling Profiling (7)
  • TRN Boring TRN Boring (7)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (6)
  • 2.0 (6)
  • 4.0 (7)
  • 8.0 (7)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 11.811 in (2)
  • 13.781 in (2)
  • 15.749 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 300.0 mm (2)
  • 350.0 mm (2)
  • 400.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (6)
  • 0.008 in (6)
  • 0.016 in (6)
  • 0.031 in (7)
  • 0.047 in (7)
  • 0.063 in (7)
  • 0.095 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (6)
  • 0.2 mm (6)
  • 0.4 mm (6)
  • 0.8 mm (7)
  • 1.201 mm (7)
  • 1.6 mm (7)
  • 2.401 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (7)
  • CW5025 (7)
  • HK1500 (6)
  • PB100 (6)
  • PB170 (6)
  • PB250 (6)
  • PB300 (6)
  • THM (6)
  • THM-X (6)
  • THMF-X (6)
  • TN10P (7)
  • TN10U (6)
  • TN15M (7)
  • TN15U (6)
  • TN2000 (6)
  • TN20K (7)
  • TN20P (7)
  • TN30M (7)
  • TN30P (7)
  • TN4000 (6)
  • TN5015 (7)
  • TN5020 (7)
  • TN5105 (6)
  • TN5120 (7)
  • TN6010 (6)
  • TN6025 (6)
  • TN7005 (6)
  • TN7010 (7)
  • TN7015 (7)
  • TN7025 (7)
  • TN7035 (7)
  • TN7105 (6)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (7)
  • TN8025 (7)
  • TTI15 (6)
  • TTR (6)
  • TTS (6)
  • TTX (6)
  • WBH10C (6)
  • WBH10P (6)
  • WBH10U (6)
  • WBH20P (6)
  • WBH25P (6)
  • WBH25U (6)
  • WBH30P (6)
  • WBK40U (6)
  • WBK45U (6)
  • WDN00U (6)
  • WDN25U (6)
  • WK05CT (7)
  • WK15CT (6)
  • WK20CT (7)
  • WM15CT (7)
  • WM25CT (7)
  • WM35CT (7)
  • WP05CT (6)
  • WP15CT (7)
  • WP25CT (7)
  • WP35CT (7)
  • WS10PT (7)
  • WS25PT (7)
  • WU10HT (7)
  • WU10PT (6)
  • WU25PT (6)
Hand Of Tool
Hand Of Tool
  • L (3)
  • R (4)
Wiper Insert
Wiper Insert
  • N (7)
  • Y (6)
F Dimension
F Dimension
  • 17.0 mm (2)
  • 22.0 mm (2)
  • 27.0 mm (3)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.669 in (2)
  • 0.866 in (2)
  • 1.063 in (3)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (2)
  • 1.575 in (2)
  • 1.969 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (2)
  • 5.039 in (2)
  • 6.299 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (2)
  • 128.0 mm (2)
  • 160.0 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (6)
  • B L (6)
  • C A (7)
  • C N (7)
  • D P (6)
  • H T (6)
  • H W (7)
Back-End
Back-End Diameter
Back-End Diameter
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 7 of 7 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Gage Insert [L2] Head Length [L2] Head Length [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size
3883469 A25TPCLNL12 A25TPCLNL12 WG   25 .98 CN..120408 40 1.574 32 1.26 300 11.811 17 .669 1/4-18 NPT
    List price:
    ₹14,585.00 /each
    Your price:
    Qty
    3883468 A25TPCLNR12 A25TPCLNR12 WG   25 .98 CN..120408 40 1.574 32 1.26 300 11.811 17 .669 1/4-18 NPT
      List price:
      ₹14,585.00 /each
      Your price:
      Qty
      3883467 A32UPCLNL12 A32UPCLNL12 WG   32 1.26 CN..120408 50 1.968 40 1.575 350 13.78 22 .866 1/4-18 NPT
        List price:
        ₹23,395.00 /each
        Your price:
        Qty
        3883466 A32UPCLNR12 A32UPCLNR12 WG   32 1.26 CN..120408 50 1.968 40 1.575 350 13.78 22 .866 1/4-18 NPT
          List price:
          ₹23,395.00 /each
          Your price:
          Qty
          3883465 A40TPCLNL12 A40TPCLNL12 WG   40 1.57 CN..120408 55 2.165 50 1.969 400 15.748 27 1.063 1/4-18 NPT
            List price:
            ₹25,888.00 /each
            Your price:
            Qty
            3883463 A40TPCLNR12 A40TPCLNR12 WG   40 1.57 CN..120408 55 2.165 50 1.969 400 15.748 27 1.06 1/4-18 NPT
              List price:
              ₹25,888.00 /each
              Your price:
              Qty
              3883442 A40TPCLNR16 A40TPCLNR16 WG   40 1.574 CN..160612 55 2.165 50 1.968 400 15.748 27 1.063 1/4-18 NPT
                List price:
                ₹33,653.00 /each
                Your price:
                Qty
                List price:
                Discount: %
                Your price:
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                product-image
                Please adjust the following properties from

                ISO Catalog Number

                ANSI Catalog Number

                to find similar products.

                The following files are available

                Please select a file to download

                Models

                You are about to create a duplicate . Do you want to proceed?
                You are about to permanently delete Do you want to proceed?
                You are about to permanently delete and all items within that folder. Do you want to proceed?
                Are you sure you want to permanently delete these items?
                What would you like to rename your to?

                A folder with the name already exists .

                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?

                A folder with the name already exists .

                Please enter a valid name
                Send a copy of

                Oops, you have used your own email address! Please enter another email address to proceed.

                An active user does not exist under that email address. Please Click Here , to send a registration invitation to


                Please enter a valid Email
                Please enter a valid name
                You should be logged to see your dashboard information
                Session expired due to inactivity, please login again
                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                item(s) successfully added to the cart
                View Cart
                DOWNLOAD TYPE:



                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                Minimum quantity should be

                SAP Material Number ISO Catalog Number Grade    
                Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                You are about to leave the Solution building process.

                Are you sure you want to leave?