Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Top Drill S™ • Steel and Cast Iron

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (269)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (269)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (269)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (269)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (269)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (269)
  • M Stainless Steel (269)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (269)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (269)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (269)
  • K Cast Iron (193)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (193)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (193)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (193)
Select All Star
  • CN (1)
  • IN (13)
  • SG (93)
Applications
Applications
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (193)
  • Cross Hole Drilling Cross Hole Drilling (1)
  • Drilling Drilling (462)
  • Inclined Exit Drilling Inclined Exit Drilling (1)
  • Stacked Plates Drilling Stacked Plates Drilling (10)
Cutting Diameter
Cutting Diameter
  • 0.119 in (3)
  • 0.12 in (4)
  • 0.125 in (4)
  • 0.126 in (1)
  • 0.129 in (4)
  • 0.13 in (1)
  • 0.136 in (3)
  • 0.138 in (2)
  • 0.142 in (1)
  • 0.143 in (1)
  • 0.145 in (5)
  • 0.147 in (4)
  • 0.15 in (1)
  • 0.156 in (1)
  • 0.157 in (4)
  • 0.159 in (3)
  • 0.161 in (7)
  • 0.165 in (2)
  • 0.166 in (3)
  • 0.169 in (2)
  • 0.177 in (2)
  • 0.182 in (3)
  • 0.188 in (3)
  • 0.191 in (5)
  • 0.193 in (1)
  • 0.197 in (2)
  • 0.201 in (5)
  • 0.203 in (2)
  • 0.213 in (5)
  • 0.217 in (2)
  • 0.219 in (4)
  • 0.221 in (4)
  • 0.228 in (2)
  • 0.234 in (1)
  • 0.237 in (3)
  • 0.244 in (1)
  • 0.248 in (1)
  • 0.25 in (3)
  • 0.256 in (3)
  • 0.257 in (4)
  • 0.261 in (2)
  • 0.266 in (4)
  • 0.268 in (4)
  • 0.272 in (1)
  • 0.276 in (2)
  • 0.281 in (1)
  • 0.288 in (1)
  • 0.291 in (1)
  • 0.297 in (1)
  • 0.307 in (2)
  • 0.313 in (3)
  • 0.315 in (4)
  • 0.323 in (1)
  • 0.328 in (1)
  • 0.332 in (2)
  • 0.335 in (5)
  • 0.345 in (3)
  • 0.347 in (1)
  • 0.354 in (3)
  • 0.359 in (1)
  • 0.362 in (1)
  • 0.366 in (2)
  • 0.368 in (5)
  • 0.374 in (2)
  • 0.375 in (3)
  • 0.378 in (1)
  • 0.382 in (1)
  • 0.386 in (1)
  • 0.391 in (1)
  • 0.394 in (2)
  • 0.402 in (2)
  • 0.406 in (4)
  • 0.414 in (3)
  • 0.421 in (1)
  • 0.422 in (3)
  • 0.425 in (1)
  • 0.433 in (4)
  • 0.437 in (1)
  • 0.438 in (2)
  • 0.441 in (1)
  • 0.445 in (2)
  • 0.453 in (2)
  • 0.457 in (1)
  • 0.465 in (2)
  • 0.47 in (3)
  • 0.473 in (5)
  • 0.48 in (1)
  • 0.484 in (4)
  • 0.488 in (1)
  • 0.492 in (3)
  • 0.496 in (3)
  • 0.5 in (2)
  • 0.512 in (5)
  • 0.516 in (3)
  • 0.528 in (1)
  • 0.531 in (4)
  • 0.535 in (2)
  • 0.543 in (1)
  • 0.547 in (3)
  • 0.551 in (2)
  • 0.555 in (2)
  • 0.559 in (1)
  • 0.564 in (2)
  • 0.568 in (3)
  • 0.572 in (2)
  • 0.576 in (3)
  • 0.578 in (4)
  • 0.579 in (1)
  • 0.583 in (3)
  • 0.587 in (4)
  • 0.591 in (1)
  • 0.594 in (8)
  • 0.598 in (3)
  • 0.602 in (2)
  • 0.606 in (4)
  • 0.609 in (5)
  • 0.61 in (2)
  • 0.614 in (2)
  • 0.618 in (5)
  • 0.622 in (3)
  • 0.625 in (3)
  • 0.626 in (3)
  • 0.63 in (2)
  • 0.634 in (2)
  • 0.638 in (6)
  • 0.641 in (3)
  • 0.642 in (4)
  • 0.646 in (5)
  • 0.654 in (5)
  • 0.656 in (4)
  • 0.657 in (3)
  • 0.661 in (3)
  • 0.665 in (6)
  • 0.673 in (5)
  • 0.677 in (6)
  • 0.681 in (5)
  • 0.685 in (6)
  • 0.689 in (3)
  • 0.69 in (1)
  • 0.694 in (4)
  • 0.698 in (5)
  • 0.702 in (2)
  • 0.704 in (5)
  • 0.705 in (4)
  • 0.709 in (1)
  • 0.713 in (4)
  • 0.717 in (5)
  • 0.719 in (5)
  • 0.72 in (6)
  • 0.728 in (4)
  • 0.734 in (6)
  • 0.74 in (5)
  • 0.75 in (2)
  • 0.756 in (5)
  • 0.76 in (5)
  • 0.768 in (6)
  • 0.78 in (5)
  • 0.787 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (3)
  • 3.051 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (1)
  • 3.276 mm (4)
  • 3.301 mm (1)
  • 3.45 mm (3)
  • 3.5 mm (2)
  • 3.575 mm (1)
  • 3.6 mm (1)
  • 3.651 mm (5)
  • 3.725 mm (4)
  • 3.801 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (4)
  • 4.05 mm (3)
  • 4.101 mm (7)
  • 4.2 mm (2)
  • 4.226 mm (3)
  • 4.3 mm (2)
  • 4.5 mm (2)
  • 4.625 mm (3)
  • 4.775 mm (3)
  • 4.851 mm (5)
  • 4.9 mm (1)
  • 5.0 mm (2)
  • 5.101 mm (5)
  • 5.15 mm (2)
  • 5.4 mm (5)
  • 5.5 mm (2)
  • 5.551 mm (4)
  • 5.625 mm (4)
  • 5.801 mm (2)
  • 5.95 mm (1)
  • 6.0 mm (3)
  • 6.2 mm (1)
  • 6.301 mm (1)
  • 6.351 mm (3)
  • 6.5 mm (3)
  • 6.525 mm (4)
  • 6.625 mm (2)
  • 6.75 mm (4)
  • 6.801 mm (4)
  • 6.9 mm (1)
  • 7.0 mm (2)
  • 7.15 mm (1)
  • 7.301 mm (1)
  • 7.4 mm (1)
  • 7.551 mm (1)
  • 7.801 mm (2)
  • 7.95 mm (3)
  • 8.0 mm (4)
  • 8.201 mm (1)
  • 8.326 mm (1)
  • 8.425 mm (2)
  • 8.5 mm (5)
  • 8.725 mm (3)
  • 8.8 mm (1)
  • 9.0 mm (3)
  • 9.125 mm (1)
  • 9.201 mm (1)
  • 9.3 mm (2)
  • 9.35 mm (5)
  • 9.5 mm (2)
  • 9.525 mm (3)
  • 9.601 mm (1)
  • 9.701 mm (1)
  • 9.8 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (2)
  • 10.201 mm (2)
  • 10.3 mm (2)
  • 10.326 mm (2)
  • 10.5 mm (3)
  • 10.701 mm (1)
  • 10.726 mm (3)
  • 10.8 mm (1)
  • 11.0 mm (4)
  • 11.101 mm (1)
  • 11.125 mm (2)
  • 11.201 mm (1)
  • 11.3 mm (2)
  • 11.5 mm (2)
  • 11.601 mm (1)
  • 11.8 mm (2)
  • 11.9 mm (3)
  • 12.0 mm (5)
  • 12.201 mm (1)
  • 12.3 mm (4)
  • 12.4 mm (1)
  • 12.5 mm (3)
  • 12.601 mm (3)
  • 12.701 mm (2)
  • 13.0 mm (5)
  • 13.101 mm (3)
  • 13.4 mm (1)
  • 13.5 mm (4)
  • 13.601 mm (2)
  • 13.8 mm (1)
  • 13.9 mm (3)
  • 14.0 mm (2)
  • 14.101 mm (2)
  • 14.201 mm (1)
  • 14.3 mm (2)
  • 14.4 mm (3)
  • 14.5 mm (2)
  • 14.601 mm (3)
  • 14.675 mm (4)
  • 14.701 mm (1)
  • 14.8 mm (3)
  • 14.9 mm (4)
  • 15.0 mm (1)
  • 15.076 mm (4)
  • 15.101 mm (4)
  • 15.201 mm (3)
  • 15.3 mm (2)
  • 15.4 mm (4)
  • 15.476 mm (5)
  • 15.5 mm (2)
  • 15.601 mm (2)
  • 15.701 mm (5)
  • 15.8 mm (3)
  • 15.875 mm (3)
  • 15.9 mm (3)
  • 16.0 mm (2)
  • 16.1 mm (2)
  • 16.2 mm (6)
  • 16.276 mm (3)
  • 16.3 mm (4)
  • 16.401 mm (5)
  • 16.6 mm (5)
  • 16.675 mm (4)
  • 16.7 mm (3)
  • 16.8 mm (3)
  • 16.901 mm (6)
  • 17.1 mm (5)
  • 17.2 mm (6)
  • 17.3 mm (5)
  • 17.401 mm (6)
  • 17.475 mm (3)
  • 17.5 mm (1)
  • 17.6 mm (4)
  • 17.7 mm (5)
  • 17.8 mm (2)
  • 17.85 mm (5)
  • 17.901 mm (4)
  • 18.0 mm (1)
  • 18.1 mm (4)
  • 18.2 mm (5)
  • 18.25 mm (5)
  • 18.3 mm (6)
  • 18.5 mm (4)
  • 18.651 mm (6)
  • 18.8 mm (5)
  • 19.05 mm (2)
  • 19.201 mm (5)
  • 19.3 mm (5)
  • 19.5 mm (6)
  • 19.8 mm (5)
  • 20.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (9)
  • 17.0 mm (7)
  • 20.0 mm (15)
  • 23.0 mm (12)
  • 24.0 mm (9)
  • 29.0 mm (18)
  • 33.0 mm (12)
  • 35.0 mm (29)
  • 40.0 mm (15)
  • 41.0 mm (9)
  • 43.0 mm (28)
  • 45.0 mm (26)
  • 48.0 mm (10)
  • 49.0 mm (13)
  • 51.0 mm (29)
  • 55.0 mm (21)
  • 56.0 mm (17)
  • 57.0 mm (5)
  • 60.0 mm (11)
  • 61.0 mm (3)
  • 63.0 mm (15)
  • 68.0 mm (8)
  • 71.0 mm (28)
  • 77.0 mm (18)
  • 79.0 mm (5)
  • 91.0 mm (11)
  • 101.0 mm (27)
  • 113.0 mm (31)
  • 124.0 mm (21)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.022 in (9)
  • 0.027 in (7)
  • 0.031 in (15)
  • 0.035 in (12)
  • 0.037 in (9)
  • 0.045 in (18)
  • 0.052 in (12)
  • 0.054 in (29)
  • 0.062 in (15)
  • 0.064 in (9)
  • 0.067 in (28)
  • 0.07 in (26)
  • 0.075 in (10)
  • 0.076 in (13)
  • 0.079 in (29)
  • 0.087 in (21)
  • 0.088 in (17)
  • 0.089 in (5)
  • 0.093 in (11)
  • 0.094 in (3)
  • 0.097 in (15)
  • 0.105 in (8)
  • 0.11 in (28)
  • 0.12 in (18)
  • 0.122 in (5)
  • 0.142 in (11)
  • 0.156 in (27)
  • 0.176 in (31)
  • 0.192 in (21)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (9)
  • 0.946 in (7)
  • 1.102 in (27)
  • 1.339 in (9)
  • 1.417 in (12)
  • 1.575 in (12)
  • 1.614 in (6)
  • 1.732 in (14)
  • 1.85 in (15)
  • 1.929 in (9)
  • 2.087 in (15)
  • 2.165 in (15)
  • 2.205 in (10)
  • 2.362 in (13)
  • 2.402 in (13)
  • 2.559 in (26)
  • 2.638 in (5)
  • 2.795 in (17)
  • 2.835 in (3)
  • 2.874 in (29)
  • 3.031 in (11)
  • 3.11 in (21)
  • 3.15 in (8)
  • 3.269 in (15)
  • 3.661 in (28)
  • 3.701 in (5)
  • 3.976 in (18)
  • 4.252 in (11)
  • 4.764 in (27)
  • 5.315 in (31)
  • 5.827 in (21)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (9)
  • 24.0 mm (7)
  • 28.0 mm (27)
  • 34.0 mm (9)
  • 36.0 mm (12)
  • 40.0 mm (12)
  • 41.0 mm (6)
  • 44.0 mm (14)
  • 47.0 mm (15)
  • 49.0 mm (9)
  • 53.0 mm (15)
  • 55.0 mm (15)
  • 56.0 mm (10)
  • 60.0 mm (13)
  • 61.0 mm (13)
  • 65.0 mm (26)
  • 67.0 mm (5)
  • 71.0 mm (17)
  • 72.0 mm (3)
  • 73.0 mm (29)
  • 77.0 mm (11)
  • 79.0 mm (21)
  • 80.0 mm (8)
  • 83.0 mm (15)
  • 93.0 mm (28)
  • 94.0 mm (5)
  • 101.0 mm (18)
  • 108.0 mm (11)
  • 121.0 mm (27)
  • 135.0 mm (31)
  • 148.0 mm (21)
Reach Min to Reach Max
Application
Coating
Coating
  • AlCrN (193)
  • TiAlN (269)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15PD (193)
  • WP20PD (269)
Front-End
Point Angle
Point Angle
  • 140.0 (437)
Point Angle Min to Point Angle Max
Back-End
Back-End Diameter
Back-End Diameter
  • 6.0 mm (100)
  • 8.0 mm (38)
  • 10.0 mm (36)
  • 12.0 mm (37)
  • 14.0 mm (35)
  • 16.0 mm (68)
  • 18.0 mm (88)
  • 20.0 mm (60)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (100)
  • 0.315 in (38)
  • 0.394 in (36)
  • 0.473 in (37)
  • 0.551 in (35)
  • 0.63 in (68)
  • 0.709 in (88)
  • 0.787 in (60)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Solid Carbide Drills • TOP DRILL S™

TDS412A • 5 x D
(67 Products)
  • Shank - Cylindrical Plain ≤h6Shank - Cylindrical Plain ≤h6
  • 3856338563
  • Drilling Depth: 5xDrilling Depth: 5x
  • Drilling - Through CoolantDrilling - Through Coolant
  • DrillingDrilling
  • Helix Angle: 30°Helix Angle: 30°
  • 3855038550
  • Tool Dimensions: 2flute/4margin/coolantTool Dimensions: 2flute/4margin/coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4158811 TDS412A04300 TDS412A04300 WK15PD 4.3000 .1693 74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7080 .0279 36.0 1.417 6.0 .2362  
    List price:
    $98.08 /each.
    Your price::
    4158850 TDS412A06800 TDS412A06800 WK15PD 6.8000 .2677 91.0000 3.582 53.0000 2.086 43.0000 1.692 1.1440 .0451 36.0 1.417 8.0 .315  
      List price:
      $113.62 /each.
      Your price::
      4158872 TDS412A08500 TDS412A08500 WK15PD 8.5000 .3346 103.0000 4.055 61.0000 2.401 49.0000 1.929 1.4430 .0568 40.0 1.574 10.0 .3937  
        List price:
        $132.91 /each.
        Your price::
        4156764 TDS412A12600 TDS412A12600 WK15PD 12.6000 .4961 124.0000 4.881 77.0000 3.031 60.0000 2.362 2.1660 .0853 45.0 1.771 14.0 .5512  
          List price:
          $275.48 /each.
          Your price::
          4156780 TDS412A14000 TDS412A14000 WK15PD 14.0000 .5512 124.0000 4.881 77.0000 3.031 60.0000 2.362 2.4140 .0950 45.0 1.771 14.0 .5512  
            Your price::
            4156786 TDS412A14500 TDS412A14500 WK15PD   14.5000 .5709 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.5030 .0985 48.0 1.889 16.0 .6299
              List price:
              $328.53 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Solid Carbide Drills • TOP DRILL S™

              TDS402A • 5 x D
              (88 Products)
              • DrillingDrilling
              • Drilling Depth: 5xDrilling Depth: 5x
              • Shank - Cylindrical Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: 30°Helix Angle: 30°
              • 3856338563
              • 3855038550
              • Drilling - Through CoolantDrilling - Through Coolant
              • 3851338513
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [D1] Wire Size [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4162967 TDS402A03000 TDS402A03000 WP20PD 3.0000 .1181   66.0000 2.598 28.0000 1.102 23.0000 .9055 0.4800 .0189 36.0 1.417 6.0 .2362  
                List price:
                $93.03 /each.
                Your price::
                4162970 TDS402A03175 TDS402A03175 WP20PD 3.1750 .1250   66.0000 2.598 28.0000 1.102 23.0000 .9055 0.5140 .0202 36.0 1.417 6.0 .2362  
                  List price:
                  $94.65 /each.
                  Your price::
                  4162983 TDS402A03264 TDS402A03264 WP20PD 3.2640 .1285 30 66.0000 2.598 28.0000 1.102 23.0000 .9055 0.5290 .0208 36.0 1.417 6.0 .2362  
                    List price:
                    $94.65 /each.
                    Your price::
                    4162984 TDS402A03300 TDS402A03300 WP20PD 3.3000 .1299   66.0000 2.598 28.0000 1.102 23.0000 .9055 0.5360 .0211 36.0 1.417 6.0 .2362  
                      List price:
                      $94.65 /each.
                      Your price::
                      4163015 TDS402A04500 TDS402A04500 WP20PD   4.5000 .1772   74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7430 .0293 36.0 1.417 6.0 .2362
                        List price:
                        $98.08 /each.
                        Your price::