M100 Series

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (62)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(60)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(62)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(62)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(62)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(62)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(59)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(59)
    • M Stainless Steel (59)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(59)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(59)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(59)
    • K Cast Iron (60)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(60)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(60)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(60)
    • N Non-Ferrous Materials (27)
      • N1
        Wrought Aluminum (27)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(26)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
    • S High-Temp Alloys (57)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(57)
    • H Hardened Materials (12)
      • H1
        Hardened Materials 44-48 HRC(12)
    Select All Star
    • CN (10)
    • DE (29)
    • GB (1)
    • SG (9)
    • US (11)
    Applications
    Applications
    • Face MillingFace Milling (37)
    • PocketPocket (37)
    • Pocket HelicalPocket Helical (37)
    • Pocket MillingPocket Milling (37)
    • Profile MillingProfile Milling (37)
    • RampingRamping (37)
    • Shoulder Ball NoseShoulder Ball Nose (37)
    • Shoulder MillingShoulder Milling (37)
    • Slot MillingSlot Milling (37)
    • Slot Square EndSlot Square End (37)
    Cutting Diameter
    Cutting Diameter
    • 0.315 in(3)
    • 0.356 in(1)
    • 0.394 in(2)
    • 0.435 in(1)
    • 0.473 in(1)
    • 0.582 in(1)
    • 0.591 in(1)
    • 0.63 in(3)
    • 0.779 in(1)
    • 0.787 in(1)
    • 0.906 in(1)
    • 1.102 in(1)
    • 1.339 in(2)
    • 1.37 in(1)
    • 1.417 in(1)
    • 1.496 in(1)
    • 1.53 in(1)
    • 1.575 in(1)
    • 1.85 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.52 in(2)
    • 2.677 in(1)
    • 3.307 in(2)
    • 3.465 in(1)
    • 4.291 in(2)
    • 5.67 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.0 mm(3)
    • 9.05 mm(1)
    • 10.0 mm(2)
    • 11.05 mm(1)
    • 12.0 mm(1)
    • 14.775 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(3)
    • 19.776 mm(1)
    • 20.0 mm(1)
    • 23.0 mm(1)
    • 28.0 mm(1)
    • 34.0 mm(2)
    • 34.801 mm(1)
    • 36.0 mm(1)
    • 38.0 mm(1)
    • 38.85 mm(1)
    • 40.0 mm(1)
    • 47.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 64.0 mm(2)
    • 68.0 mm(1)
    • 84.0 mm(2)
    • 88.0 mm(1)
    • 109.0 mm(2)
    • 144.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 16.0 mm(3)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 26.0 mm(2)
    • 30.0 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 35.0 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(2)
    • 52.0 mm(2)
    • 63.0 mm(3)
    • 66.0 mm(1)
    • 80.0 mm(3)
    • 100.0 mm(3)
    • 125.0 mm(2)
    • 160.0 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.63 in(3)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.024 in(2)
    • 1.181 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.379 in(1)
    • 1.575 in(1)
    • 1.969 in(3)
    • 2.0 in(2)
    • 2.047 in(2)
    • 2.48 in(3)
    • 2.598 in(1)
    • 3.15 in(3)
    • 3.938 in(3)
    • 4.921 in(2)
    • 6.299 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(4)
    • 5.0 mm(7)
    • 6.0 mm(11)
    • 8.0 mm(15)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(4)
    • 0.197 in(7)
    • 0.237 in(11)
    • 0.315 in(15)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.181 in(2)
    • 1.575 in(14)
    • 1.631 in(2)
    • 1.969 in(8)
    • 2.4 in(1)
    • 2.48 in(1)
    • 3.15 in(3)
    • 3.19 in(1)
    • 3.228 in(1)
    • 3.86 in(1)
    • 4.0 in(1)
    • 4.921 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 30.0 mm(2)
    • 40.0 mm(14)
    • 41.401 mm(2)
    • 50.0 mm(8)
    • 60.95 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(3)
    • 81.025 mm(1)
    • 82.0 mm(1)
    • 98.051 mm(1)
    • 101.601 mm(1)
    • 125.0 mm(2)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (37)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (7)
    • B-Cutter Retention Screw (12)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (5)
    • Weldon (12)
    Number of Flutes
    Number of Flutes
    • 2 (14)
    • 3 (2)
    • 4 (8)
    • 5 (5)
    • 6 (4)
    • 7 (2)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(9)
    • 1.631 in(2)
    • 1.969 in(8)
    • 2.047 in(2)
    • 2.48 in(4)
    • 3.543 in(1)
    • 3.622 in(1)
    • 4.53 in(1)
    • 5.197 in(1)
    • 5.433 in(1)
    • 5.53 in(1)
    • 5.591 in(2)
    • 6.15 in(1)
    • 6.28 in(1)
    • 7.205 in(1)
    • 7.362 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(9)
    • 41.401 mm(2)
    • 50.0 mm(8)
    • 52.0 mm(2)
    • 63.0 mm(4)
    • 90.0 mm(1)
    • 92.0 mm(1)
    • 115.051 mm(1)
    • 132.0 mm(1)
    • 138.0 mm(1)
    • 140.451 mm(1)
    • 142.0 mm(2)
    • 156.201 mm(1)
    • 159.5 mm(1)
    • 183.0 mm(1)
    • 187.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.157 in(7)
    • 0.197 in(13)
    • 0.237 in(25)
    • 0.315 in(25)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 4.0 mm(7)
    • 5.0 mm(13)
    • 6.0 mm(25)
    • 8.0 mm(25)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (39)
    • TN2510 (36)
    • TN25M (17)
    • TN450 (36)
    • TN5015 (8)
    • TN5020 (8)
    • TN5515 (36)
    • TN6525 (39)
    • TN6540 (45)
    • TN7015 (8)
    • TN7035 (8)
    • TN7110 (8)
    • TN7115 (1)
    • TN7135 (9)
    • TN7525 (36)
    • TN7535 (36)
    • TTI25 (36)
    • TTM (23)
    • TTM08 (27)
    • TTM09 (4)
    • WK15CM (23)
    • WP35CM (44)
    • WS30PM (12)
    • WS40PM (13)
    Hand Of Tool
    Hand Of Tool
    • R (37)
    Wiper Insert
    Wiper Insert
    • N (33)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.25 (1)
    • 1.75 (1)
    • 2.25 (1)
    • 2.5 (1)
    • 2.75 (2)
    • 3.5 (1)
    • 3.75 (2)
    • 4.0 (1)
    • 4.5 (1)
    • 4.75 (1)
    • 5.75 (1)
    • 6.0 (1)
    • 6.5 (1)
    • 6.75 (1)
    • 7.0 (1)
    • 7.5 (3)
    • 7.75 (2)
    • 8.25 (1)
    • 8.75 (1)
    • 10.0 (2)
    • 10.25 (2)
    • 10.75 (1)
    • 12.0 (1)
    • 13.5 (1)
    • 14.25 (1)
    • 15.75 (1)
    • 22.0 (1)
    • 23.0 (1)
    • 40.0 (1)
    • 50.0 (1)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • R-ROUND (33)
    Insert IC Size
    Insert IC Size
    • 8.0 mm(3)
    • 10.0 mm(6)
    • 12.0 mm(14)
    • 16.0 mm(10)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.315 in(3)
    • 0.394 in(6)
    • 0.473 in(14)
    • 0.63 in(10)
    Insert IC Size MintoInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 43 (2)
    • MMX (4)
    • X (11)
    Cutting Tool Material
    Cutting Tool Material
    • H W (33)
    Tolerance Class
    Tolerance Class
    • M (29)
    • P (4)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (12)
    • SCREW-ON (5)
    • SHELL MILL (20)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 22.0 mm(7)
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(7)
    • 28.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(6)
    • 40.0 mm(3)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.866 in(7)
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.063 in(7)
    • 1.102 in(3)
    • 1.25 in(1)
    • 1.26 in(6)
    • 1.575 in(3)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?