successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (9)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
Applications
  • Facing Facing (5)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Plunge Turning Plunge Turning (2)
  • Profiling Profiling (9)
  • Turning Turning (9)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (9)
  • Interrupted (6)
  • Lightly Interrupted Cut (9)
  • Smooth Cut (9)
  • Varying Depth of Cut (9)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (1)
  • 90.0 (2)
  • 93.0 (2)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
  • 3.0 (2)
  • 4.0 (7)
  • 6.0 (2)
  • 8.0 (5)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.1 mm (4)
  • 0.102 mm (2)
  • 0.2 mm (6)
  • 0.203 mm (4)
  • 0.397 mm (6)
  • 0.4 mm (9)
  • 0.406 mm (2)
  • 0.792 mm (2)
  • 0.794 mm (6)
  • 0.8 mm (9)
  • 1.19 mm (2)
  • 1.191 mm (6)
  • 1.2 mm (9)
  • 1.587 mm (2)
  • 1.588 mm (2)
  • 1.6 mm (4)
  • 2.4 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (4)
  • 0.008 in (6)
  • 0.0083 in (2)
  • 0.0156 in (9)
  • 0.016 in (6)
  • 0.031 in (6)
  • 0.0312 in (6)
  • 0.0313 in (9)
  • 0.0315 in (2)
  • 0.0469 in (9)
  • 0.047 in (4)
  • 0.0472 in (2)
  • 0.0625 in (4)
  • 0.063 in (4)
  • 0.0938 in (2)
  • 0.1563 in (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (4)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (4)
  • GX (2)
  • HK1500 (4)
  • HT2 (4)
  • HTX (4)
  • K060 (4)
  • K090 (5)
  • K1 (2)
  • K10M (4)
  • K10P (7)
  • K10U (5)
  • K15U (4)
  • K20K (5)
  • K21 (4)
  • K25M (8)
  • K25P (7)
  • K313 (6)
  • K35P (2)
  • K420 (4)
  • K45 (4)
  • K68 (5)
  • KB1340 (4)
  • KB1345 (4)
  • KB1610 (4)
  • KB1625 (4)
  • KB1630 (4)
  • KB5610 (2)
  • KB5625 (4)
  • KB5630 (2)
  • KB9610 (4)
  • KB9640 (4)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (2)
  • KC250 (2)
  • KC5010 (9)
  • KC5025 (6)
  • KC5410 (4)
  • KC5510 (6)
  • KC5525 (4)
  • KC710 (2)
  • KC720 (4)
  • KC722 (2)
  • KC730 (9)
  • KC7310 (8)
  • KC732 (4)
  • KC8050 (9)
  • KC810 (7)
  • KC850 (9)
  • KC9010 (9)
  • KC9025 (9)
  • KC910 (5)
  • KC9105 (6)
  • KC9110 (9)
  • KC9120 (9)
  • KC9125 (9)
  • KC9140 (9)
  • KC9145 (2)
  • KC9215 (9)
  • KC9225 (9)
  • KC9240 (8)
  • KC9240NEW (8)
  • KC9245 (8)
  • KC9315 (9)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (9)
  • KC950 (5)
  • KC990 (9)
  • KCK05 (9)
  • KCK05B (6)
  • KCK15 (6)
  • KCK15B (9)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (8)
  • KCM15B (8)
  • KCM25 (8)
  • KCM25B (6)
  • KCM35 (4)
  • KCM35B (4)
  • KCP05 (7)
  • KCP05B (6)
  • KCP10 (9)
  • KCP10B (9)
  • KCP25 (9)
  • KCP25B (9)
  • KCP30 (9)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (6)
  • KCPK05 (4)
  • KCS10 (2)
  • KCS10B (4)
  • KCU10 (9)
  • KCU25 (6)
  • KD050 (4)
  • KD081 (4)
  • KD100 (2)
  • KD120 (4)
  • KD1400 (4)
  • KD1405 (2)
  • KD1425 (4)
  • KM1 (4)
  • KMF (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (5)
  • KT175 (4)
  • KT315 (9)
  • KT325 (6)
  • KT5020 (2)
  • KU10T (6)
  • KU30T (6)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (5)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (6)
  • NL300 (4)
  • NL400 (2)
  • NL920 (6)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (4)
  • SP0819 (4)
  • SP0NTA (1)
  • SP3019 (4)
  • SP4019 (2)
  • THM (4)
  • THM-X (2)
  • THMF-X (4)
  • TN10P (9)
  • TN10U (5)
  • TN15M (6)
  • TN15U (4)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (9)
  • TN30M (8)
  • TN30P (4)
  • TN4000 (4)
  • TN5015 (6)
  • TN5020 (6)
  • TN5105 (6)
  • TN5120 (6)
  • TN6010 (2)
  • TN6025 (4)
  • TN7005 (6)
  • TN7010 (9)
  • TN7015 (9)
  • TN7025 (9)
  • TN7035 (5)
  • TN7105 (6)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (5)
  • TN8025 (6)
  • TTI15 (4)
  • TTM09 (2)
  • TTR (2)
  • TTS (4)
  • TTX (4)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (4)
  • WBH20P (4)
  • WBH25P (4)
  • WBH25U (4)
  • WBH30P (2)
  • WBK40U (4)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (4)
  • WK05CT (7)
  • WK15CT (4)
  • WK20CT (7)
  • WM15CT (6)
  • WM25CT (7)
  • WM35CT (6)
  • WP05CT (2)
  • WP15CT (7)
  • WP20TT (2)
  • WP25CT (7)
  • WP35CT (6)
  • WS10PT (7)
  • WS25PT (6)
  • WU10HT (6)
  • WU10PT (6)
  • WU25PT (6)
  • X00511 (2)
Hand Of Tool
Hand Of Tool
  • L (4)
  • N (1)
  • R (4)
Wiper Insert
Wiper Insert
  • N (9)
  • Y (4)
Cutting Direction
Cutting Direction
  • B (4)
  • S (5)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (6)
  • NEGATIVE-ZERO (1)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (6)
  • B L (4)
  • C A (5)
  • C N (4)
  • D P (4)
  • H T (9)
  • H W (9)
other
Platform
Platform
  • KM Micro (8)
  • KM16 (1)
Tool Unit
Tool Unit
  • I (9)
  • M (9)
Cutting Condition Material
Cutting Condition Material
  • H-All (5)
  • K-All (9)
  • K1 (4)
  • M-All (9)
  • N-All (6)
  • P-All (9)
  • S-All (7)
  • S2 (4)
  • S4 (2)
Insert Hand
Insert Hand
  • N (9)
  • R (1)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert Torque Newton Meters
2226271 KM16MTGNL1620 KM16MTGNL1620 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 TN..160408 10.000-11.000
    List price:
    $196.08 /each.
    Your price::
    Qty
    2226270 KM16MTGNR1620 KM16MTGNR1620 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 TN..160408 10.000-11.000
      List price:
      $196.08 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert Torque Newton Meters
      2226264 KM16MCLNL0920 KM16MCLNL0920 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 CN..090308 10.000-11.000
        List price:
        $196.08 /each.
        Your price::
        Qty
        2226263 KM16MCLNR0920 KM16MCLNR0920 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 CN..090308 10.000-11.000
          List price:
          $196.08 /each.
          Your price::
          Qty
          2226265 KM16MCLNR1220 KM16MCLNR1220 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 CN..120408 10.000-11.000
            List price:
            $196.08 /each.
            Your price::
            Qty
            2226266 KM16MCLNL1220 KM16MCLNL1220 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 CN..120408 10.000-11.000
              List price:
              $196.08 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert Torque Newton Meters
              2226269 KM16MSDNN0920 KM16MSDNN0920 KM16 0.0000 .0000 8.0000 .3150 20.0000 .7874 SN..090308 10.000-11.000
                List price:
                $196.08 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert Torque Newton Meters
                2226267 KM16MDJNR1120 KM16MDJNR1120 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 DN..110408 10.000-11.000
                  List price:
                  $196.08 /each.
                  Your price::
                  Qty
                  2226268 KM16MDJNL1120 KM16MDJNL1120 KM16 10.0000 .3937 8.0000 .3150 20.0000 .7874 DN..110408 10.000-11.000
                    List price:
                    $196.08 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    product-image
                    Please adjust the following properties from

                    ISO Catalog Number

                    ANSI Catalog Number

                    to find similar products.
                    You are about to create a duplicate . Do you want to proceed?
                    You are about to delete Do you want to proceed?
                    What would you like to rename your to?
                    Please enter a valid name
                    Please enter a name for the duplicate
                    Please enter a valid name
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Please enter a valid name
                    Send a copy of

                    Please enter a valid Email
                    Please enter a valid name

                    We have found the following CAD Drawings

                    Select the files you are looking for and download them all at once

                    You should be logged to see your dashboard information
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                    item(s) successfully added to the cart
                    View Cart