successfully added to cart
View Cart

Notifications

Mark all as read

Top Notch® Threading and Grooving

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (14)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (14)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (14)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (14)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC
      (14)
    • H2
      Hardened Materials 48-55 HRC
      (14)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (14)
  • Grooving Grooving (12)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (8)
  • Threading Threading (6)
  • Turning Turning (14)
Type of Thread
Type of Thread
  • 60 (14)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (14)
  • M (8)
  • NPT (6)
  • STUB ACME (6)
  • UN (14)
  • UNJ (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (8)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (14)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.051 mm (3)
  • 0.057 mm (3)
  • 0.066 mm (6)
  • 0.076 mm (14)
  • 0.08 mm (10)
  • 0.089 mm (4)
  • 0.09 mm (4)
  • 0.094 mm (6)
  • 0.097 mm (3)
  • 0.1 mm (10)
  • 0.102 mm (10)
  • 0.116 mm (3)
  • 0.117 mm (3)
  • 0.127 mm (6)
  • 0.131 mm (6)
  • 0.132 mm (6)
  • 0.133 mm (6)
  • 0.15 mm (6)
  • 0.155 mm (6)
  • 0.157 mm (6)
  • 0.16 mm (4)
  • 0.165 mm (10)
  • 0.173 mm (6)
  • 0.178 mm (6)
  • 0.185 mm (2)
  • 0.19 mm (14)
  • 0.191 mm (14)
  • 0.198 mm (6)
  • 0.2 mm (6)
  • 0.202 mm (8)
  • 0.224 mm (6)
  • 0.235 mm (6)
  • 0.244 mm (3)
  • 0.25 mm (8)
  • 0.251 mm (6)
  • 0.254 mm (12)
  • 0.269 mm (6)
  • 0.282 mm (6)
  • 0.284 mm (6)
  • 0.3 mm (6)
  • 0.315 mm (8)
  • 0.318 mm (10)
  • 0.33 mm (6)
  • 0.34 mm (6)
  • 0.343 mm (4)
  • 0.356 mm (6)
  • 0.404 mm (6)
  • 0.406 mm (6)
  • 0.43 mm (6)
  • 0.445 mm (10)
  • 0.472 mm (3)
  • 0.49 mm (6)
  • 0.5 mm (4)
  • 0.508 mm (6)
  • 0.565 mm (2)
  • 0.57 mm (3)
  • 0.572 mm (10)
  • 0.575 mm (7)
  • 0.75 mm (4)
  • 0.787 mm (10)
  • 0.902 mm (10)
  • 1.0 mm (10)
  • 1.194 mm (10)
  • 1.195 mm (3)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.585 mm (6)
  • 1.588 mm (14)
  • 1.59 mm (2)
  • 1.75 mm (10)
  • 1.98 mm (3)
  • 1.981 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.388 mm (10)
  • 2.39 mm (2)
  • 2.5 mm (4)
  • 3.175 mm (4)
  • 3.18 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.0023 in (3)
  • 0.0026 in (6)
  • 0.003 in (14)
  • 0.0031 in (10)
  • 0.0035 in (4)
  • 0.0037 in (6)
  • 0.0038 in (3)
  • 0.004 in (10)
  • 0.0046 in (6)
  • 0.005 in (6)
  • 0.0052 in (6)
  • 0.0053 in (6)
  • 0.0059 in (6)
  • 0.006 in (6)
  • 0.0062 in (6)
  • 0.0065 in (10)
  • 0.0068 in (6)
  • 0.007 in (6)
  • 0.0075 in (14)
  • 0.0078 in (6)
  • 0.0079 in (3)
  • 0.008 in (8)
  • 0.0088 in (6)
  • 0.0093 in (6)
  • 0.0096 in (3)
  • 0.0099 in (6)
  • 0.01 in (12)
  • 0.0106 in (6)
  • 0.0111 in (6)
  • 0.0112 in (6)
  • 0.0118 in (6)
  • 0.0124 in (6)
  • 0.0125 in (10)
  • 0.013 in (6)
  • 0.0135 in (10)
  • 0.014 in (6)
  • 0.0159 in (6)
  • 0.016 in (6)
  • 0.017 in (6)
  • 0.0175 in (10)
  • 0.0186 in (3)
  • 0.0193 in (6)
  • 0.0197 in (4)
  • 0.02 in (6)
  • 0.0225 in (10)
  • 0.0295 in (4)
  • 0.031 in (10)
  • 0.0355 in (10)
  • 0.0394 in (10)
  • 0.047 in (10)
  • 0.0492 in (10)
  • 0.0591 in (10)
  • 0.0625 in (14)
  • 0.0689 in (10)
  • 0.078 in (6)
  • 0.0787 in (10)
  • 0.0886 in (10)
  • 0.094 in (10)
  • 0.0984 in (4)
  • 0.106 in (3)
  • 0.125 in (4)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (14)
  • K420 (14)
  • K4H (8)
  • K68 (14)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KC250 (10)
  • KC5010 (14)
  • KC5025 (14)
  • KC5410 (14)
  • KC710 (14)
  • KC720 (14)
  • KC722 (14)
  • KC730 (14)
  • KC732 (6)
  • KC810 (14)
  • KC850 (14)
  • KC910 (8)
  • KC9110 (14)
  • KC9120 (6)
  • KC9320 (14)
  • KC935 (14)
  • KC950 (14)
  • KCK20 (12)
  • KCK20B (14)
  • KCP10B (14)
  • KCP25B (14)
  • KCU10 (14)
  • KCU25 (14)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (10)
  • KT315 (14)
  • KU10T (14)
  • KU25T (14)
  • KU30T (14)
  • KY3000 (10)
  • THM (10)
  • TN10P (10)
  • TN6010 (14)
  • TN6025 (14)
  • TN7110 (14)
  • WU10HT (3)
  • WU10PT (6)
  • WU25PT (3)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (4)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (6)
  • 1.626 in (2)
  • 1.874 in (2)
  • 2.126 in (8)
  • 2.229 in (2)
  • 2.252 in (2)
  • 3.5 in (4)
  • 5.5 in (2)
  • 6.874 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (6)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 54.0 mm (8)
  • 56.625 mm (2)
  • 57.2 mm (2)
  • 88.9 mm (4)
  • 139.7 mm (2)
  • 174.6 mm (2)
  • 209.6 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (6)
  • S (2)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (6)
  • 45.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (6)
  • 1.772 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (2)
Front-End
Cutting Width
Cutting Width
  • 0.5 mm (4)
  • 0.787 mm (4)
  • 0.8 mm (4)
  • 0.889 mm (4)
  • 0.991 mm (4)
  • 1.0 mm (10)
  • 1.041 mm (4)
  • 1.19 mm (7)
  • 1.194 mm (10)
  • 1.199 mm (2)
  • 1.2 mm (10)
  • 1.39 mm (4)
  • 1.397 mm (4)
  • 1.4 mm (4)
  • 1.473 mm (4)
  • 1.5 mm (10)
  • 1.56 mm (2)
  • 1.57 mm (8)
  • 1.575 mm (10)
  • 1.69 mm (4)
  • 1.7 mm (4)
  • 1.702 mm (4)
  • 1.75 mm (10)
  • 1.829 mm (6)
  • 1.94 mm (4)
  • 1.95 mm (4)
  • 1.956 mm (4)
  • 1.981 mm (6)
  • 2.0 mm (10)
  • 2.007 mm (4)
  • 2.2 mm (10)
  • 2.235 mm (10)
  • 2.24 mm (7)
  • 2.25 mm (7)
  • 2.388 mm (10)
  • 2.39 mm (3)
  • 2.464 mm (6)
  • 2.5 mm (10)
  • 2.667 mm (6)
  • 2.74 mm (4)
  • 2.743 mm (10)
  • 2.75 mm (10)
  • 2.794 mm (6)
  • 2.997 mm (10)
  • 3.0 mm (14)
  • 3.099 mm (6)
  • 3.17 mm (6)
  • 3.175 mm (14)
  • 3.18 mm (4)
  • 3.2 mm (14)
  • 3.245 mm (4)
  • 3.25 mm (6)
  • 3.251 mm (10)
  • 3.27 mm (4)
  • 3.32 mm (3)
  • 3.329 mm (3)
  • 3.5 mm (14)
  • 3.607 mm (6)
  • 3.73 mm (2)
  • 3.81 mm (4)
  • 3.84 mm (4)
  • 3.96 mm (6)
  • 3.962 mm (6)
  • 3.974 mm (3)
  • 3.988 mm (6)
  • 4.0 mm (10)
  • 4.24 mm (3)
  • 4.242 mm (10)
  • 4.25 mm (3)
  • 4.3 mm (6)
  • 4.5 mm (10)
  • 4.521 mm (6)
  • 4.699 mm (8)
  • 4.775 mm (10)
  • 4.78 mm (2)
  • 4.785 mm (2)
  • 4.788 mm (2)
  • 4.8 mm (6)
  • 4.801 mm (10)
  • 4.81 mm (6)
  • 4.88 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (4)
  • 5.004 mm (4)
  • 5.131 mm (4)
  • 5.41 mm (4)
  • 5.5 mm (4)
  • 5.563 mm (4)
  • 6.0 mm (4)
  • 6.35 mm (4)
  • 6.36 mm (2)
  • 6.48 mm (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.0197 in (4)
  • 0.031 in (4)
  • 0.0315 in (4)
  • 0.035 in (4)
  • 0.039 in (4)
  • 0.0394 in (10)
  • 0.041 in (4)
  • 0.047 in (10)
  • 0.0472 in (10)
  • 0.055 in (4)
  • 0.0551 in (4)
  • 0.058 in (4)
  • 0.0591 in (10)
  • 0.062 in (10)
  • 0.0669 in (4)
  • 0.067 in (4)
  • 0.0689 in (10)
  • 0.072 in (6)
  • 0.076 in (4)
  • 0.0768 in (4)
  • 0.077 in (4)
  • 0.078 in (6)
  • 0.0787 in (10)
  • 0.079 in (7)
  • 0.0866 in (10)
  • 0.088 in (10)
  • 0.0886 in (7)
  • 0.094 in (10)
  • 0.097 in (6)
  • 0.0984 in (10)
  • 0.105 in (6)
  • 0.108 in (10)
  • 0.1083 in (10)
  • 0.11 in (6)
  • 0.118 in (10)
  • 0.1181 in (14)
  • 0.122 in (6)
  • 0.125 in (14)
  • 0.126 in (14)
  • 0.1278 in (4)
  • 0.128 in (10)
  • 0.129 in (4)
  • 0.131 in (3)
  • 0.1378 in (14)
  • 0.142 in (6)
  • 0.147 in (2)
  • 0.15 in (4)
  • 0.151 in (4)
  • 0.156 in (6)
  • 0.157 in (6)
  • 0.1574 in (10)
  • 0.1575 in (10)
  • 0.167 in (10)
  • 0.1673 in (3)
  • 0.169 in (6)
  • 0.1771 in (10)
  • 0.1772 in (10)
  • 0.178 in (6)
  • 0.185 in (8)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.195 in (6)
  • 0.1969 in (4)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.2165 in (4)
  • 0.2166 in (2)
  • 0.219 in (4)
  • 0.2362 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (4)
  • 3 (6)
  • 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.51 mm (2)
  • 7.47 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (2)
  • 0.294 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (14)
  • H W (14)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (8)
System Size
System Size
  • KM40TS (8)
Back-End Diameter
Back-End Diameter
  • 1.5748 in (12)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
other
Cutting Condition Material
Cutting Condition Material
  • H-All (14)
  • K-All (14)
  • M-All (14)
  • N-All (14)
  • P-All (14)
  • S-All (14)
Insert Hand
Insert Hand
  • L (7)
  • R (7)
Over All Length [L]
Over All Length [L]
  • 40.0 mm (8)
  • 45.0 mm (2)
  • 47.0 mm (4)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.5748 in (2)
  • 1.575 in (6)
  • 1.772 in (2)
  • 1.85 in (3)
  • 1.8504 in (1)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading

Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3902288 KM40TSNRL3045M KM40TSNRL3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3R 0.33 0.74
    List price:
    $240.51 /each.
    Your price::
    Qty
    3902289 KM40TSNRR3045M KM40TSNRR3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3L 0.34 0.75
      List price:
      $240.51 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      Threading

      Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
      (6 Products)
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3902290 KM40TSNSL2 KM40TSNSL2 40.0000 1.574 27.0000 1.063 NG2L 0.32 0.70
        List price:
        $240.51 /each.
        Your price::
        Qty
        3902291 KM40TSNSL3 KM40TSNSL3 47.0000 1.850 27.0000 1.063 NG3L 0.33 0.72
          List price:
          $240.51 /each.
          Your price::
          Qty
          3902292 KM40TSNSL4 KM40TSNSL4 47.0000 1.850 27.0000 1.063 NG4L 0.30 0.66
            List price:
            $240.51 /each.
            Your price::
            Qty
            3902293 KM40TSNSR2 KM40TSNSR2 40.0000 1.574 27.0000 1.063 NG2R 0.32 0.70
              List price:
              $240.51 /each.
              Your price::
              Qty
              3902294 KM40TSNSR3 KM40TSNSR3 47.0000 1.850 27.0000 1.063 NG3R 0.32 0.71
                List price:
                $240.51 /each.
                Your price::
                Qty
                3902295 KM40TSNSR4 KM40TSNSR4 47.0000 1.850 27.0000 1.063 NG4R 0.30 0.66
                  List price:
                  $240.51 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  Threading

                  Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
                  (6 Products)
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  3902132 KM40TSNEL2 KM40TSNEL2 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG2R 0.30 0.66