successfully added to cart
View Cart

Notifications

Mark all as read

KM50TS™ Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (75)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (75)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (75)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (75)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (75)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (75)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (75)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (75)
  • M Stainless Steel (75)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (75)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (75)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (75)
  • K Cast Iron (75)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (75)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (75)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (75)
  • N Non-Ferrous Materials (75)
    • N1
      Wrought Aluminum
      (75)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (75)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (75)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (75)
    • N6
      Carbon, Graphite Composites, CFRP
      (75)
    • N7
      MMC's
      (75)
  • S High-Temp Alloys (75)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (75)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (75)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (75)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (75)
  • H Hardened Materials (75)
    • H1
      Hardened Materials 44-48 HRC
      (75)
    • H2
      Hardened Materials 48-55 HRC
      (66)
    • H3
      Hardened Materials 56-60 HRC
      (60)
    • H4
      Hardened Materials >60 HRC
      (60)
Applications
Applications
  • Facing Facing (50)
  • Grooving Grooving (16)
  • ID Grooving ID Grooving (15)
  • ID Thread Turning ID Thread Turning (25)
  • Multiple Direction Cutting Multiple Direction Cutting (50)
  • OD Thread Turning OD Thread Turning (16)
  • Profiling Profiling (50)
  • TRN Boring TRN Boring (50)
  • Threading Threading (25)
  • Turning Turning (50)
Type of Thread
Type of Thread
  • 55 (9)
  • 60 (25)
  • ACME (19)
  • API (12)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (7)
  • BSW (15)
  • BUTTRESS (16)
  • M (18)
  • NPT (13)
  • NPTF (7)
  • RD DIN 405 (9)
  • STUB ACME (15)
  • TR DIN 103 (9)
  • UN (23)
  • UNJ (13)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (66)
  • Interrupted (49)
  • Lightly Interrupted Cut (66)
  • Smooth Cut (66)
  • Varying Depth of Cut (66)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (25)
  • 93.0 (15)
  • 95.0 (35)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (63)
  • 2.0 (59)
  • 3.0 (16)
  • 4.0 (43)
  • 6.0 (7)
  • 8.0 (27)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.03 mm (4)
  • 0.038 mm (4)
  • 0.051 mm (9)
  • 0.056 mm (3)
  • 0.057 mm (4)
  • 0.066 mm (6)
  • 0.07 mm (7)
  • 0.076 mm (20)
  • 0.08 mm (16)
  • 0.081 mm (4)
  • 0.089 mm (6)
  • 0.09 mm (6)
  • 0.094 mm (6)
  • 0.097 mm (8)
  • 0.1 mm (60)
  • 0.102 mm (56)
  • 0.108 mm (4)
  • 0.116 mm (2)
  • 0.117 mm (4)
  • 0.127 mm (6)
  • 0.131 mm (6)
  • 0.132 mm (6)
  • 0.133 mm (6)
  • 0.15 mm (6)
  • 0.152 mm (7)
  • 0.155 mm (6)
  • 0.157 mm (6)
  • 0.16 mm (8)
  • 0.165 mm (10)
  • 0.173 mm (6)
  • 0.178 mm (6)
  • 0.185 mm (3)
  • 0.19 mm (16)
  • 0.191 mm (16)
  • 0.198 mm (6)
  • 0.2 mm (57)
  • 0.202 mm (9)
  • 0.203 mm (40)
  • 0.21 mm (7)
  • 0.224 mm (6)
  • 0.235 mm (6)
  • 0.244 mm (2)
  • 0.25 mm (9)
  • 0.251 mm (6)
  • 0.254 mm (13)
  • 0.269 mm (6)
  • 0.282 mm (6)
  • 0.284 mm (6)
  • 0.3 mm (6)
  • 0.305 mm (2)
  • 0.315 mm (8)
  • 0.318 mm (10)
  • 0.33 mm (6)
  • 0.34 mm (6)
  • 0.343 mm (4)
  • 0.356 mm (6)
  • 0.397 mm (47)
  • 0.4 mm (50)
  • 0.404 mm (6)
  • 0.406 mm (21)
  • 0.43 mm (6)
  • 0.432 mm (2)
  • 0.445 mm (10)
  • 0.472 mm (2)
  • 0.49 mm (6)
  • 0.5 mm (6)
  • 0.508 mm (6)
  • 0.565 mm (2)
  • 0.57 mm (4)
  • 0.572 mm (10)
  • 0.575 mm (6)
  • 0.6 mm (7)
  • 0.7 mm (4)
  • 0.75 mm (6)
  • 0.787 mm (12)
  • 0.792 mm (25)
  • 0.794 mm (48)
  • 0.8 mm (50)
  • 0.902 mm (10)
  • 0.93 mm (1)
  • 0.936 mm (4)
  • 1.0 mm (12)
  • 1.188 mm (2)
  • 1.19 mm (25)
  • 1.191 mm (49)
  • 1.194 mm (12)
  • 1.195 mm (4)
  • 1.2 mm (50)
  • 1.25 mm (12)
  • 1.404 mm (1)
  • 1.5 mm (12)
  • 1.585 mm (6)
  • 1.587 mm (25)
  • 1.588 mm (65)
  • 1.59 mm (2)
  • 1.6 mm (49)
  • 1.75 mm (12)
  • 1.98 mm (4)
  • 1.981 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.38 mm (2)
  • 2.381 mm (15)
  • 2.388 mm (10)
  • 2.39 mm (2)
  • 2.4 mm (2)
  • 2.5 mm (4)
  • 3.175 mm (4)
  • 3.18 mm (2)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0012 in (4)
  • 0.0015 in (4)
  • 0.002 in (9)
  • 0.0023 in (4)
  • 0.0026 in (6)
  • 0.0028 in (7)
  • 0.003 in (20)
  • 0.0031 in (12)
  • 0.0032 in (4)
  • 0.0035 in (6)
  • 0.0037 in (6)
  • 0.0038 in (8)
  • 0.004 in (64)
  • 0.0043 in (4)
  • 0.0046 in (6)
  • 0.005 in (6)
  • 0.0052 in (6)
  • 0.0053 in (6)
  • 0.0059 in (6)
  • 0.006 in (13)
  • 0.0062 in (6)
  • 0.0063 in (4)
  • 0.0065 in (10)
  • 0.0068 in (6)
  • 0.007 in (6)
  • 0.0075 in (16)
  • 0.0078 in (6)
  • 0.0079 in (2)
  • 0.008 in (60)
  • 0.0083 in (32)
  • 0.0088 in (6)
  • 0.0093 in (6)
  • 0.0096 in (2)
  • 0.0099 in (6)
  • 0.01 in (13)
  • 0.0106 in (6)
  • 0.0111 in (6)
  • 0.0112 in (6)
  • 0.0118 in (6)
  • 0.012 in (2)
  • 0.0124 in (6)
  • 0.0125 in (10)
  • 0.013 in (6)
  • 0.0135 in (10)
  • 0.014 in (6)
  • 0.0156 in (50)
  • 0.0158 in (1)
  • 0.0159 in (6)
  • 0.016 in (54)
  • 0.017 in (8)
  • 0.0175 in (10)
  • 0.0186 in (2)
  • 0.0193 in (6)
  • 0.0197 in (6)
  • 0.02 in (6)
  • 0.022 in (3)
  • 0.0225 in (10)
  • 0.0276 in (4)
  • 0.0295 in (6)
  • 0.031 in (59)
  • 0.0312 in (48)
  • 0.0313 in (50)
  • 0.0315 in (26)
  • 0.0355 in (10)
  • 0.0368 in (1)
  • 0.0369 in (4)
  • 0.0394 in (12)
  • 0.0468 in (2)
  • 0.0469 in (50)
  • 0.047 in (62)
  • 0.0472 in (25)
  • 0.0492 in (12)
  • 0.0553 in (1)
  • 0.0591 in (12)
  • 0.0625 in (65)
  • 0.063 in (34)
  • 0.0689 in (12)
  • 0.078 in (6)
  • 0.0787 in (10)
  • 0.0886 in (10)
  • 0.0938 in (17)
  • 0.094 in (12)
  • 0.0984 in (4)
  • 0.106 in (4)
  • 0.125 in (4)
  • 0.126 in (2)
  • 0.1563 in (25)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (42)
  • 241 (25)
  • CL4 (25)
  • CM2 (42)
  • CM3 (25)
  • CM4 (27)
  • CPX (42)
  • CW2 (25)
  • CW2015 (42)
  • CW5025 (49)
  • GX (25)
  • HCK10 (1)
  • HCK20 (4)
  • HK1500 (32)
  • HK35 (1)
  • HT2 (26)
  • HTX (26)
  • HWK15 (1)
  • K060 (40)
  • K090 (42)
  • K1 (25)
  • K10M (50)
  • K10P (50)
  • K10U (47)
  • K15 (8)
  • K15U (47)
  • K20K (50)
  • K21 (25)
  • K25M (49)
  • K25P (47)
  • K2885 (12)
  • K313 (66)
  • K35P (24)
  • K420 (58)
  • K45 (40)
  • K4H (9)
  • K68 (63)
  • KB1340 (25)
  • KB1345 (51)
  • KB1610 (47)
  • KB1625 (40)
  • KB1630 (51)
  • KB5610 (47)
  • KB5625 (46)
  • KB5630 (40)
  • KB9610 (47)
  • KB9640 (32)
  • KBH10 (47)
  • KBH10B (40)
  • KBH20 (48)
  • KBH20B (40)
  • KBK35 (25)
  • KC210 (40)
  • KC250 (54)
  • KC5010 (70)
  • KC5025 (75)
  • KC5410 (66)
  • KC5510 (49)
  • KC5525 (47)
  • KC710 (46)
  • KC720 (74)
  • KC722 (45)
  • KC730 (75)
  • KC7310 (49)
  • KC732 (56)
  • KC8050 (50)
  • KC810 (66)
  • KC850 (66)
  • KC9010 (49)
  • KC9025 (50)
  • KC910 (59)
  • KC9105 (50)
  • KC9110 (66)
  • KC9120 (55)
  • KC9125 (50)
  • KC9140 (49)
  • KC9145 (49)
  • KC9215 (49)
  • KC9225 (50)
  • KC9240 (50)
  • KC9240NEW (50)
  • KC9245 (49)
  • KC9315 (50)
  • KC9320 (66)
  • KC9325 (50)
  • KC935 (66)
  • KC950 (65)
  • KC990 (49)
  • KCD25 (16)
  • KCK05 (50)
  • KCK05B (49)
  • KCK15 (50)
  • KCK15B (50)
  • KCK20 (63)
  • KCK20B (66)
  • KCM15 (50)
  • KCM15B (50)
  • KCM25 (50)
  • KCM25B (50)
  • KCM35 (50)
  • KCM35B (34)
  • KCP05 (50)
  • KCP05B (47)
  • KCP10 (50)
  • KCP10B (66)
  • KCP25 (50)
  • KCP25B (66)
  • KCP30 (50)
  • KCP30B (50)
  • KCP40 (49)
  • KCP40B (49)
  • KCPK05 (49)
  • KCS10 (26)
  • KCS10B (50)
  • KCU10 (66)
  • KCU25 (66)
  • KD050 (42)
  • KD081 (46)
  • KD100 (48)
  • KD120 (50)
  • KD1400 (47)
  • KD1405 (40)
  • KD1425 (53)
  • KM1 (25)
  • KMF (25)
  • KT1120 (25)
  • KT125 (40)
  • KT150 (40)
  • KT175 (52)
  • KT315 (64)
  • KT325 (26)
  • KTP10 (15)
  • KU10T (64)
  • KU25T (20)
  • KU30T (66)
  • KY1310 (49)
  • KY1320 (49)
  • KY1540 (40)
  • KY1615 (42)
  • KY2000 (42)
  • KY2100 (40)
  • KY3000 (52)
  • KY3400 (49)
  • KY3500 (49)
  • KY4000 (27)
  • KY4300 (42)
  • KY4400 (49)
  • KYHK15B (49)
  • KYK10 (47)
  • KYK25 (49)
  • KYK35 (49)
  • KYS25 (40)
  • KYS30 (47)
  • NL200 (25)
  • NL250 (49)
  • NL300 (28)
  • NL400 (34)
  • NL920 (48)
  • P25 (33)
  • PB100 (25)
  • PB170 (26)
  • PB250 (26)
  • PB300 (25)
  • PD100 (1)
  • PD50 (1)
  • PS5 (25)
  • SP0819 (34)
  • SP0PW3 (1)
  • SP3019 (34)
  • SP4019 (50)
  • SP4066 (3)
  • THM (38)
  • THM-X (25)
  • THMF-X (25)
  • TN10P (61)
  • TN10U (48)
  • TN15M (50)
  • TN15U (47)
  • TN2000 (33)
  • TN20K (50)
  • TN20P (50)
  • TN30M (50)
  • TN30P (49)
  • TN4000 (32)
  • TN5015 (35)
  • TN5020 (35)
  • TN5105 (48)
  • TN5120 (50)
  • TN6010 (57)
  • TN6025 (57)
  • TN7005 (47)
  • TN7010 (50)
  • TN7015 (50)
  • TN7025 (50)
  • TN7035 (35)
  • TN7105 (33)
  • TN7110 (51)
  • TN7115 (50)
  • TN7125 (35)
  • TN7135 (35)
  • TN8025 (50)
  • TTI15 (25)
  • TTR (26)
  • TTS (25)
  • TTX (25)
  • W00342 (1)
  • WBH10C (47)
  • WBH10P (40)
  • WBH10U (47)
  • WBH20P (48)
  • WBH25P (40)
  • WBH25U (40)
  • WBH30P (40)
  • WBK40U (25)
  • WBK45U (41)
  • WDN00U (40)
  • WDN25U (47)
  • WK05CT (50)
  • WK15CT (33)
  • WK20CT (50)
  • WM15CT (50)
  • WM25CT (50)
  • WM35CT (49)
  • WP05CT (32)
  • WP15CT (50)
  • WP25CT (50)
  • WP35CT (50)
  • WS10PT (50)
  • WS25PT (49)
  • WU05PT (1)
  • WU10HT (52)
  • WU10PT (39)
  • WU25PT (36)
  • X00511 (25)
Hand Of Tool
Hand Of Tool
  • L (36)
  • R (39)
Wiper Insert
Wiper Insert
  • N (75)
  • Y (48)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.7283 in (2)
  • 0.7874 in (2)
  • 0.9843 in (4)
  • 1.2598 in (16)
  • 1.3386 in (2)
  • 1.5748 in (20)
  • 1.9685 in (24)
  • 1.969 in (3)
  • 2.4803 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 18.5 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 32.0 mm (16)
  • 34.0 mm (2)
  • 40.0 mm (20)
  • 50.0 mm (27)
  • 63.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (16)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (16)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (35)
  • E (6)
  • S (25)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (58)
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (16)
Maximum Bore Depth
Maximum Bore Depth
  • 38.3 mm (3)
  • 42.01 mm (2)
  • 49.22 mm (2)
  • 56.16 mm (2)
  • 60.47 mm (4)
  • 70.0 mm (1)
  • 70.32 mm (4)
  • 70.36 mm (1)
  • 70.47 mm (6)
  • 81.26 mm (4)
  • 87.23 mm (6)
  • 88.11 mm (2)
  • 88.29 mm (2)
  • 88.3 mm (2)
  • 91.26 mm (4)
  • 91.28 mm (2)
  • 96.26 mm (8)
  • 99.25 mm (1)
  • 120.02 mm (4)
  • 120.34 mm (13)
  • 140.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.5079 in (2)
  • 1.508 in (1)
  • 1.6539 in (2)
  • 1.9378 in (2)
  • 2.211 in (2)
  • 2.3807 in (2)
  • 2.381 in (2)
  • 2.756 in (1)
  • 2.7685 in (4)
  • 2.77 in (1)
  • 2.774 in (2)
  • 2.7744 in (4)
  • 3.1992 in (2)
  • 3.2 in (2)
  • 3.434 in (4)
  • 3.4343 in (2)
  • 3.4689 in (2)
  • 3.476 in (4)
  • 3.5929 in (1)
  • 3.593 in (3)
  • 3.594 in (2)
  • 3.7898 in (3)
  • 3.79 in (5)
  • 3.908 in (1)
  • 4.7252 in (4)
  • 4.7378 in (7)
  • 4.738 in (6)
  • 5.5118 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (74)
Front-End
Clamp Style
Clamp Style
  • M (42)
  • N (15)
  • P (7)
  • S (10)
Cutting Width
Cutting Width
  • 0.5 mm (6)
  • 0.787 mm (6)
  • 0.8 mm (6)
  • 0.889 mm (6)
  • 0.991 mm (6)
  • 1.0 mm (12)
  • 1.041 mm (6)
  • 1.19 mm (10)
  • 1.194 mm (12)
  • 1.199 mm (3)
  • 1.2 mm (12)
  • 1.39 mm (6)
  • 1.397 mm (6)
  • 1.4 mm (6)
  • 1.473 mm (6)
  • 1.5 mm (12)
  • 1.56 mm (3)
  • 1.57 mm (9)
  • 1.575 mm (12)
  • 1.69 mm (6)
  • 1.7 mm (6)
  • 1.702 mm (6)
  • 1.75 mm (12)
  • 1.829 mm (6)
  • 1.94 mm (6)
  • 1.95 mm (6)
  • 1.956 mm (6)
  • 1.981 mm (6)
  • 2.0 mm (12)
  • 2.007 mm (6)
  • 2.2 mm (12)
  • 2.235 mm (12)
  • 2.24 mm (8)
  • 2.25 mm (10)
  • 2.388 mm (12)
  • 2.39 mm (4)
  • 2.464 mm (6)
  • 2.5 mm (12)
  • 2.667 mm (6)
  • 2.74 mm (6)
  • 2.743 mm (12)
  • 2.75 mm (12)
  • 2.794 mm (6)
  • 2.997 mm (12)
  • 3.0 mm (16)
  • 3.099 mm (6)
  • 3.17 mm (6)
  • 3.175 mm (16)
  • 3.18 mm (5)
  • 3.2 mm (16)
  • 3.245 mm (6)
  • 3.25 mm (6)
  • 3.251 mm (12)
  • 3.27 mm (6)
  • 3.32 mm (2)
  • 3.329 mm (2)
  • 3.5 mm (16)
  • 3.607 mm (6)
  • 3.73 mm (3)
  • 3.81 mm (6)
  • 3.84 mm (6)
  • 3.96 mm (6)
  • 3.962 mm (6)
  • 3.974 mm (2)
  • 3.988 mm (6)
  • 4.0 mm (10)
  • 4.24 mm (4)
  • 4.242 mm (10)
  • 4.25 mm (2)
  • 4.3 mm (6)
  • 4.5 mm (10)
  • 4.521 mm (6)
  • 4.699 mm (8)
  • 4.775 mm (10)
  • 4.78 mm (2)
  • 4.785 mm (2)