successfully added to cart
View Cart

Notifications

Mark all as read

KM63TS™ • HPC • High Pressure Coolant Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
Applications
  • Facing Facing (8)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (8)
  • Turning Turning (10)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Interrupted (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (6)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
  • 3.0 (2)
  • 4.0 (8)
  • 6.0 (2)
  • 8.0 (4)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.1 mm (4)
  • 0.102 mm (6)
  • 0.2 mm (4)
  • 0.203 mm (2)
  • 0.34 mm (4)
  • 0.397 mm (8)
  • 0.4 mm (10)
  • 0.406 mm (4)
  • 0.6 mm (2)
  • 0.792 mm (6)
  • 0.794 mm (8)
  • 0.8 mm (10)
  • 1.188 mm (2)
  • 1.19 mm (2)
  • 1.191 mm (10)
  • 1.2 mm (10)
  • 1.587 mm (2)
  • 1.588 mm (6)
  • 1.6 mm (10)
  • 2.38 mm (2)
  • 2.4 mm (2)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (8)
  • 0.008 in (4)
  • 0.0083 in (2)
  • 0.013 in (4)
  • 0.0156 in (10)
  • 0.016 in (8)
  • 0.031 in (8)
  • 0.0312 in (8)
  • 0.0313 in (10)
  • 0.0315 in (2)
  • 0.0468 in (2)
  • 0.0469 in (10)
  • 0.047 in (10)
  • 0.0472 in (2)
  • 0.0625 in (10)
  • 0.063 in (10)
  • 0.0938 in (2)
  • 0.094 in (2)
  • 0.126 in (2)
  • 0.1563 in (2)
  • 0.312 in (4)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (8)
  • 241 (2)
  • CL4 (6)
  • CM2 (8)
  • CM3 (6)
  • CM4 (4)
  • CPX (8)
  • CW2 (6)
  • CW2015 (8)
  • CW5025 (10)
  • GX (2)
  • HK1500 (8)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (8)
  • K1 (2)
  • K10M (10)
  • K10P (10)
  • K10U (8)
  • K15U (8)
  • K20K (10)
  • K21 (2)
  • K25M (10)
  • K25P (8)
  • K313 (10)
  • K35P (8)
  • K420 (4)
  • K45 (2)
  • K68 (8)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (4)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (4)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (6)
  • KBH20 (8)
  • KBH20B (6)
  • KBK35 (2)
  • KC210 (6)
  • KC250 (4)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (10)
  • KC5510 (10)
  • KC5525 (8)
  • KC710 (2)
  • KC720 (6)
  • KC722 (2)
  • KC730 (6)
  • KC7310 (10)
  • KC732 (6)
  • KC8050 (10)
  • KC810 (10)
  • KC850 (10)
  • KC9010 (10)
  • KC9025 (10)
  • KC910 (10)
  • KC9105 (10)
  • KC9110 (10)
  • KC9120 (10)
  • KC9125 (10)
  • KC9140 (10)
  • KC9145 (10)
  • KC9210 (4)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (10)
  • KC9240NEW (10)
  • KC9245 (10)
  • KC9315 (10)
  • KC9320 (10)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (10)
  • KC990 (10)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (10)
  • KCK15B (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCM15 (10)
  • KCM15B (10)
  • KCM25 (10)
  • KCM25B (10)
  • KCM35 (10)
  • KCM35B (10)
  • KCP05 (10)
  • KCP05B (8)
  • KCP10 (10)
  • KCP10B (10)
  • KCP25 (10)
  • KCP25B (10)
  • KCP30 (10)
  • KCP30B (10)
  • KCP40 (10)
  • KCP40B (10)
  • KCPK05 (10)
  • KCS10 (2)
  • KCS10B (10)
  • KCU10 (10)
  • KCU25 (10)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (4)
  • KD1405 (2)
  • KD1425 (4)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (6)
  • KT150 (2)
  • KT175 (6)
  • KT315 (8)
  • KT325 (6)
  • KU10T (8)
  • KU30T (10)
  • KY1310 (6)
  • KY1320 (10)
  • KY1540 (2)
  • KY1615 (8)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (8)
  • KY3400 (6)
  • KY3500 (10)
  • KY4000 (4)
  • KY4300 (4)
  • KY4400 (10)
  • KYHK15B (10)
  • KYK10 (4)
  • KYK25 (6)
  • KYK35 (10)
  • KYS25 (2)
  • KYS30 (4)
  • NL200 (6)
  • NL250 (10)
  • NL300 (8)
  • NL400 (6)
  • NL920 (8)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (10)
  • SP3019 (6)
  • SP4019 (6)
  • THM (6)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (10)
  • TN10U (8)
  • TN15M (10)
  • TN15U (8)
  • TN2000 (8)
  • TN20K (10)
  • TN20P (10)
  • TN30M (10)
  • TN30P (10)
  • TN4000 (8)
  • TN5015 (10)
  • TN5020 (10)
  • TN5105 (8)
  • TN5120 (10)
  • TN6010 (6)
  • TN6025 (8)
  • TN7005 (8)
  • TN7010 (10)
  • TN7015 (10)
  • TN7025 (10)
  • TN7035 (10)
  • TN7105 (8)
  • TN7110 (10)
  • TN7115 (10)
  • TN7125 (10)
  • TN7135 (10)
  • TN8025 (10)
  • TTI15 (6)
  • TTR (2)
  • TTS (6)
  • TTX (6)
  • WBH10C (8)
  • WBH10P (2)
  • WBH10U (4)
  • WBH20P (8)
  • WBH25P (2)
  • WBH25U (6)
  • WBH30P (2)
  • WBK40U (2)
  • WBK45U (6)
  • WDN00U (2)
  • WDN25U (4)
  • WK05CT (10)
  • WK15CT (8)
  • WK20CT (10)
  • WM15CT (10)
  • WM25CT (10)
  • WM35CT (10)
  • WP05CT (4)
  • WP15CT (10)
  • WP25CT (10)
  • WP35CT (10)
  • WS10PT (10)
  • WS25PT (10)
  • WU10HT (10)
  • WU10PT (8)
  • WU25PT (8)
  • X00511 (2)
Hand Of Tool
Hand Of Tool
  • L (1)
  • R (1)
Wiper Insert
Wiper Insert
  • N (10)
  • Y (8)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.15 in (8)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 80.0 mm (8)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (2)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (2)
Maximum Bore Depth
Maximum Bore Depth
  • 60.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.362 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (4)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (10)
  • C N (10)
  • D P (8)
  • H T (8)
  • H W (10)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (2)
System Size
System Size
  • KM63TS (2)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (10)
  • K-All (10)
  • K1 (2)
  • M-All (10)
  • N-All (10)
  • P-All (10)
  • S-All (10)
  • S2 (10)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM63TS™ Cutting Units HPC

P-Clamping
(2 Products)
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Multi Coolant TurningMulti Coolant Turning
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5697264 KM63TSPWLNL08HPC KM63TSPWLNL08HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 WN..080408/WN..432 1.34 2.96
    List price:
    $583.03 /each.
    Your price::
    Qty
    5697263 KM63TSPWLNR08HPC KM63TSPWLNR08HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 WN..080408/WN..432 1.34 2.96
      List price:
      $583.03 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      KM63TS™ Cutting Units HPC

      P-Clamping
      (2 Products)
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Multi Coolant TurningMulti Coolant Turning
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      5697261 KM63TSPDUNR15HPC KM63TSPDUNR15HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 DN..150608/DN..442 1.28 2.83
        List price:
        $583.03 /each.
        Your price::
        Qty
        5697262 KM63TSPDUNL15HPC KM63TSPDUNL15HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 DN..150608/DN..442 1.28 2.83
          List price:
          $583.03 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          KM63TS™ Cutting Units HPC

          P-Clamping
          (4 Products)
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Multi Coolant TurningMulti Coolant Turning
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          5697238 KM63TSPCLNL16HPC KM63TSPCLNL16HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.31 2.88
            List price:
            $583.03 /each.
            Your price::
            Qty
            5697237 KM63TSPCLNR16HPC KM63TSPCLNR16HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.31 2.88
              List price:
              $583.03 /each.
              Your price::
              Qty
              5697236 KM63TSPCLNL12HPC KM63TSPCLNL12HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.33 2.93
                List price:
                $583.03 /each.
                Your price::
                Qty
                5697235 KM63TSPCLNR12HPC KM63TSPCLNR12HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.33 2.93
                  List price:
                  $583.03 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  KM63TS™ Cutting Units HPC

                  P-Clamping
                  (2 Products)
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Multi Coolant TurningMulti Coolant Turning
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  5697260 KM63TSPDJNL15HPC KM63TSPDJNL15HPC 60.0000 2.362 43.0000 1.693 DN..150608/DN..442 1.01 2.22
                    List price:
                    $583.03 /each.
                    Your price::
                    Qty
                    5697239 KM63TSPDJNR15HPC KM63TSPDJNR15HPC 60.0000 2.362 43.0000 1.693 DN..150608/DN..442 1.01 2.22
                      List price:
                      $583.03 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      product-image
                      Please adjust the following properties from

                      ISO Catalog Number

                      ANSI Catalog Number

                      to find similar products.
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart